mirror of
https://github.com/monero-project/monero-site.git
synced 2024-09-28 21:41:11 +00:00
Merge pull request #1186
Remote node guide: update instructions and screenshots
This commit is contained in:
luigi1111
GitHub
commit
12b3a3558c
19 changed files with 282 additions and 67 deletions
|
|
@ -1,4 +1,4 @@
|
|||
{% include disclaimer.html translated="yes" translationOutdated="no" %}
|
||||
{% include disclaimer.html translated="yes" translationOutdated="yes" %}
|
||||
|
||||
## إيجاد خادم
|
||||
أولاً يجب عليك إيجاد خادم للإتصال به! يحتوي [moneroworld.com](https://moneroworld.com/#nodes) علي العديد من الموارد العظيمه لإيجاد خوادم. أسهل هذه الطرق هو إستخدام الخادم المُشغل بواسطه moneroworld بالفعل, لكن لديهم أيضاً أداه لإيجاد خوادم عشوائيه.
|
||||
|
|
|
|||
|
|
@ -1,11 +1,43 @@
|
|||
{% include disclaimer.html translated="no" translationOutdated="no" %}
|
||||
|
||||
## Finding a node
|
||||
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
|
||||
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
## Check if your wallet is in advanced mode
|
||||
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
|
||||
|
||||
## Connecting to the node from the GUI wallet
|
||||
After you enter your password for your wallet, you will see a pop up that will give you the option to "use custom settings". Click on it. You will then be
|
||||
sent to the "Settings > Node" page in the GUI. At this point you could choose 'Remote Node' see four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old ip address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionnaly, fill the username and password if your remote note requires them.
|
||||
### Your screen should look a bit like this
|
||||
{:width="600px"}
|
||||
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
|
||||
|
||||
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
|
||||
|
||||
If your wallet is already in Advanced mode, you can skip the next step.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
## Change your wallet to advanced mode
|
||||
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
## Finding a public remote node
|
||||
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
|
||||
## Configuring your wallet to connect to a custom public remote node
|
||||
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
|
||||
|
||||
If you don't see this pop up, go to `Settings` > `Node` page.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
On this page select `Remote Node`.
|
||||
|
||||
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
|
||||
|
||||
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
|
||||
|
||||
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
|
||||
|
||||
Finally, click on `Connect` button and wait for your wallet to connect.
|
||||
|
|
|
|||
|
|
@ -1,20 +1,43 @@
|
|||
{% include disclaimer.html translated="no" translationOutdated="no" %}
|
||||
|
||||
## Finding a node
|
||||
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
|
||||
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
## Check if your wallet is in advanced mode
|
||||
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
|
||||
|
||||
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
|
||||
|
||||
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
|
||||
|
||||
If your wallet is already in Advanced mode, you can skip the next step.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
## Change your wallet to advanced mode
|
||||
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
|
||||
|
||||
## Opening wallet in Advanced mode
|
||||
### From an open wallet
|
||||
If your wallet is already open in a mode, click "Settings" > "Wallet" > "Close wallet"
|
||||
{:width="600px"}
|
||||
### From the Welcome screen
|
||||
At the bottom of the Welcome screen, click , and select "Advanced mode". Open your wallet.
|
||||
|
||||
## Connecting to the node from the GUI wallet
|
||||
A moment after the wallet opens a pop up will appear and give the option to "use custom settings". Click on it, and you will be sent to "Settings" > "Node" in the GUI.
|
||||
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
|
||||
|
||||
On this page select 'Remote Node' and there will be four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old IP address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionally, fill the username and password if your remote note requires them.
|
||||
{:width="600px"}
|
||||
|
||||
### Your screen should look a bit like this
|
||||
{:width="600px"}
|
||||
{:width="600px"}
|
||||
|
||||
## Finding a public remote node
|
||||
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
|
||||
## Configuring your wallet to connect to a custom public remote node
|
||||
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
|
||||
|
||||
If you don't see this pop up, go to `Settings` > `Node` page.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
On this page select `Remote Node`.
|
||||
|
||||
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
|
||||
|
||||
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
|
||||
|
||||
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
|
||||
|
||||
Finally, click on `Connect` button and wait for your wallet to connect.
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
{% include disclaimer.html translated="yes" translationOutdated="no" %}
|
||||
{% include disclaimer.html translated="yes" translationOutdated="yes" %}
|
||||
|
||||
## Encontrando un nodo
|
||||
Primero lo primero, necesitas encontrar un modo para conectarte. [moneroworld.com](https://moneroworld.com/#nodes) cuenta con buenos recursos para encontrar nodos. Uno de los métodos más fáciles
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
{% include disclaimer.html translated="yes" translationOutdated="no" %}
|
||||
{% include disclaimer.html translated="yes" translationOutdated="yes" %}
|
||||
|
||||
## Trouver un nœud
|
||||
Commencez par le commencement, vous devez trouver un nœud auquel vous connecter ! [moneroworld.com](https://moneroworld.com/#nodes) propose quelques bonnes ressources pour trouver
|
||||
|
|
|
|||
|
|
@ -1,11 +1,43 @@
|
|||
{% include disclaimer.html translated="no" translationOutdated="no" %}
|
||||
|
||||
## Finding a node
|
||||
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
|
||||
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
## Check if your wallet is in advanced mode
|
||||
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
|
||||
|
||||
## Connecting to the node from the GUI wallet
|
||||
After you enter your password for your wallet, you will see a pop up that will give you the option to "use custom settings". Click on it. You will then be
|
||||
sent to the "Impostazioni > Nodo" page in the GUI. At this point you could choose 'Remote Node' see four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old ip address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionnaly, fill the username and password if your remote note requires them.
|
||||
### Your screen should look a bit like this
|
||||
{:width="600px"}
|
||||
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
|
||||
|
||||
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
|
||||
|
||||
If your wallet is already in Advanced mode, you can skip the next step.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
## Change your wallet to advanced mode
|
||||
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
## Finding a public remote node
|
||||
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
|
||||
## Configuring your wallet to connect to a custom public remote node
|
||||
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
|
||||
|
||||
If you don't see this pop up, go to `Settings` > `Node` page.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
On this page select `Remote Node`.
|
||||
|
||||
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
|
||||
|
||||
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
|
||||
|
||||
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
|
||||
|
||||
Finally, click on `Connect` button and wait for your wallet to connect.
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
{% include disclaimer.html translated="yes" translationOutdated="no" %}
|
||||
{% include disclaimer.html translated="yes" translationOutdated="yes" %}
|
||||
|
||||
## Een node vinden
|
||||
Eerst moet je natuurlijk een node vinden om verbinding mee te maken! [moneroworld.com](https://moneroworld.com/#nodes) biedt uitstekende hulpmiddelen voor het vinden van nodes. Een van de eenvoudigste methoden
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
{% include disclaimer.html translated="yes" translationOutdated="no" %}
|
||||
{% include disclaimer.html translated="yes" translationOutdated="yes" %}
|
||||
|
||||
## Wyszukiwanie węzła
|
||||
|
||||
|
|
|
|||
|
|
@ -1,11 +1,43 @@
|
|||
{% include disclaimer.html translated="no" translationOutdated="no" %}
|
||||
|
||||
## Finding a node
|
||||
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
|
||||
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
## Check if your wallet is in advanced mode
|
||||
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
|
||||
|
||||
## Connecting to the node from the GUI wallet
|
||||
After you enter your password for your wallet, you will see a pop up that will give you the option to "use custom settings". Click on it. You will then be
|
||||
sent to the "Settings > Node" page in the GUI. At this point you could choose 'Remote Node' see four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old ip address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionnaly, fill the username and password if your remote note requires them.
|
||||
### Your screen should look a bit like this
|
||||
{:width="600px"}
|
||||
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
|
||||
|
||||
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
|
||||
|
||||
If your wallet is already in Advanced mode, you can skip the next step.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
## Change your wallet to advanced mode
|
||||
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
## Finding a public remote node
|
||||
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
|
||||
## Configuring your wallet to connect to a custom public remote node
|
||||
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
|
||||
|
||||
If you don't see this pop up, go to `Settings` > `Node` page.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
On this page select `Remote Node`.
|
||||
|
||||
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
|
||||
|
||||
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
|
||||
|
||||
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
|
||||
|
||||
Finally, click on `Connect` button and wait for your wallet to connect.
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
{% include disclaimer.html translated="yes" translationOutdated="no" %}
|
||||
{% include disclaimer.html translated="yes" translationOutdated="yes" %}
|
||||
|
||||
## Как найти узел
|
||||
Перво-наперво необходимо найти узел, к которому можно будет подключится! На веб-сайте [moneroworld.com](https://moneroworld.com/#nodes) предлагается множество способов для поиска узлов. Один из самых простых заключается в использовании узла, поддерживаемого самим сайтом, но вы также можете воспользоваться и инструментом, позволяющим найти случайные узлы.
|
||||
|
|
|
|||
|
|
@ -1,11 +1,43 @@
|
|||
{% include disclaimer.html translated="no" translationOutdated="no" %}
|
||||
|
||||
## Finding a node
|
||||
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
|
||||
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
## Check if your wallet is in advanced mode
|
||||
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
|
||||
|
||||
## Connecting to the node from the GUI wallet
|
||||
After you enter your password for your wallet, you will see a pop up that will give you the option to "use custom settings". Click on it. You will then be
|
||||
sent to the "Settings > Node" page in the GUI. At this point you could choose 'Remote Node' see four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old ip address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionnaly, fill the username and password if your remote note requires them.
|
||||
### Your screen should look a bit like this
|
||||
<img src="png/remote_node/remote-node-screenshot.png" width="(600)">
|
||||
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
|
||||
|
||||
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
|
||||
|
||||
If your wallet is already in Advanced mode, you can skip the next step.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
## Change your wallet to advanced mode
|
||||
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
## Finding a public remote node
|
||||
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
|
||||
## Configuring your wallet to connect to a custom public remote node
|
||||
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
|
||||
|
||||
If you don't see this pop up, go to `Settings` > `Node` page.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
On this page select `Remote Node`.
|
||||
|
||||
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
|
||||
|
||||
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
|
||||
|
||||
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
|
||||
|
||||
Finally, click on `Connect` button and wait for your wallet to connect.
|
||||
|
|
|
|||
|
|
@ -1,11 +1,43 @@
|
|||
{% include disclaimer.html translated="no" translationOutdated="no" %}
|
||||
|
||||
## Finding a node
|
||||
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
|
||||
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
## Check if your wallet is in advanced mode
|
||||
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
|
||||
|
||||
## Connecting to the node from the GUI wallet
|
||||
After you enter your password for your wallet, you will see a pop up that will give you the option to "use custom settings". Click on it. You will then be
|
||||
sent to the "Settings > Node" page in the GUI. At this point you could choose 'Remote Node' see four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old ip address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionnaly, fill the username and password if your remote note requires them.
|
||||
### Your screen should look a bit like this
|
||||
{:width="600px"}
|
||||
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
|
||||
|
||||
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
|
||||
|
||||
If your wallet is already in Advanced mode, you can skip the next step.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
## Change your wallet to advanced mode
|
||||
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
## Finding a public remote node
|
||||
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
|
||||
## Configuring your wallet to connect to a custom public remote node
|
||||
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
|
||||
|
||||
If you don't see this pop up, go to `Settings` > `Node` page.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
On this page select `Remote Node`.
|
||||
|
||||
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
|
||||
|
||||
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
|
||||
|
||||
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
|
||||
|
||||
Finally, click on `Connect` button and wait for your wallet to connect.
|
||||
|
|
|
|||
|
|
@ -1,11 +1,43 @@
|
|||
{% include disclaimer.html translated="no" translationOutdated="no" %}
|
||||
|
||||
## Finding a node
|
||||
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
|
||||
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
## Check if your wallet is in advanced mode
|
||||
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
|
||||
|
||||
## Connecting to the node from the GUI wallet
|
||||
After you enter your password for your wallet, you will see a pop up that will give you the option to "use custom settings". Click on it. You will then be
|
||||
sent to the "Settings > Node" page in the GUI. At this point you could choose 'Remote Node' see four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old ip address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionnaly, fill the username and password if your remote note requires them.
|
||||
### Your screen should look a bit like this
|
||||
{:width="600px"}
|
||||
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
|
||||
|
||||
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
|
||||
|
||||
If your wallet is already in Advanced mode, you can skip the next step.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
## Change your wallet to advanced mode
|
||||
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
## Finding a public remote node
|
||||
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
|
||||
|
||||
## Configuring your wallet to connect to a custom public remote node
|
||||
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
|
||||
|
||||
If you don't see this pop up, go to `Settings` > `Node` page.
|
||||
|
||||
{:width="600px"}
|
||||
|
||||
On this page select `Remote Node`.
|
||||
|
||||
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
|
||||
|
||||
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
|
||||
|
||||
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
|
||||
|
||||
Finally, click on `Connect` button and wait for your wallet to connect.
|
||||
|
|
|
|||
BIN
resources/user-guides/png/remote_node/advanced_mode.png
Normal file
BIN
resources/user-guides/png/remote_node/advanced_mode.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 33 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 2.7 KiB After Width: | Height: | Size: 40 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 135 KiB After Width: | Height: | Size: 52 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 152 KiB |
BIN
resources/user-guides/png/remote_node/remote_node_config.png
Normal file
BIN
resources/user-guides/png/remote_node/remote_node_config.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 53 KiB |
BIN
resources/user-guides/png/remote_node/wallet_mode_info.png
Normal file
BIN
resources/user-guides/png/remote_node/wallet_mode_info.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 51 KiB |
Loading…
Reference in a new issue