Remote node guide: update instructions and screenshots

This commit is contained in:
rating89us 2020-09-13 22:44:32 +02:00 committed by rating89us
parent 8373efa456
commit ee1421af7f
19 changed files with 282 additions and 67 deletions

View file

@ -1,4 +1,4 @@
{% include disclaimer.html translated="yes" translationOutdated="no" %}
{% include disclaimer.html translated="yes" translationOutdated="yes" %}
## إيجاد خادم
أولاً يجب عليك إيجاد خادم للإتصال به! يحتوي [moneroworld.com](https://moneroworld.com/#nodes) علي العديد من الموارد العظيمه لإيجاد خوادم. أسهل هذه الطرق هو إستخدام الخادم المُشغل بواسطه moneroworld بالفعل, لكن لديهم أيضاً أداه لإيجاد خوادم عشوائيه.

View file

@ -1,11 +1,43 @@
{% include disclaimer.html translated="no" translationOutdated="no" %}
## Finding a node
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
## Check if your wallet is in advanced mode
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
## Connecting to the node from the GUI wallet
After you enter your password for your wallet, you will see a pop up that will give you the option to "use custom settings". Click on it. You will then be
sent to the "Settings > Node" page in the GUI. At this point you could choose 'Remote Node' see four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old ip address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionnaly, fill the username and password if your remote note requires them.
### Your screen should look a bit like this
![Node](png/remote_node/remote-node-screenshot.png){:width="600px"}
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
If your wallet is already in Advanced mode, you can skip the next step.
![Wallet mode](png/remote_node/wallet_mode_info.png){:width="600px"}
## Change your wallet to advanced mode
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
![Close Wallet](png/remote_node/close_open_wallet.png){:width="600px"}
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
![Change Wallet Mode](png/remote_node/change_wallet_mode.png){:width="600px"}
![Advanced Mode](png/remote_node/advanced_mode.png){:width="600px"}
## Finding a public remote node
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
## Configuring your wallet to connect to a custom public remote node
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
If you don't see this pop up, go to `Settings` > `Node` page.
![Configure Remote Node](png/remote_node/remote_node_config.png){:width="600px"}
On this page select `Remote Node`.
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
Finally, click on `Connect` button and wait for your wallet to connect.

View file

@ -1,20 +1,43 @@
{% include disclaimer.html translated="no" translationOutdated="no" %}
## Finding a node
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
## Check if your wallet is in advanced mode
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
If your wallet is already in Advanced mode, you can skip the next step.
![Wallet mode](png/remote_node/wallet_mode_info.png){:width="600px"}
## Change your wallet to advanced mode
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
## Opening wallet in Advanced mode
### From an open wallet
If your wallet is already open in a mode, click "Settings" > "Wallet" > "Close wallet"
![Close Wallet](png/remote_node/close_open_wallet.png){:width="600px"}
### From the Welcome screen
At the bottom of the Welcome screen, click ![Change wallet mode](png/remote_node/change_wallet_mode.png), and select "Advanced mode". Open your wallet.
## Connecting to the node from the GUI wallet
A moment after the wallet opens a pop up will appear and give the option to "use custom settings". Click on it, and you will be sent to "Settings" > "Node" in the GUI.
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
On this page select 'Remote Node' and there will be four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old IP address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionally, fill the username and password if your remote note requires them.
![Change Wallet Mode](png/remote_node/change_wallet_mode.png){:width="600px"}
### Your screen should look a bit like this
![Node testing broke image](png/remote_node/remote-node-screenshot.png){:width="600px"}
![Advanced Mode](png/remote_node/advanced_mode.png){:width="600px"}
## Finding a public remote node
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
## Configuring your wallet to connect to a custom public remote node
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
If you don't see this pop up, go to `Settings` > `Node` page.
![Configure Remote Node](png/remote_node/remote_node_config.png){:width="600px"}
On this page select `Remote Node`.
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
Finally, click on `Connect` button and wait for your wallet to connect.

View file

@ -1,4 +1,4 @@
{% include disclaimer.html translated="yes" translationOutdated="no" %}
{% include disclaimer.html translated="yes" translationOutdated="yes" %}
## Encontrando un nodo
Primero lo primero, necesitas encontrar un modo para conectarte. [moneroworld.com](https://moneroworld.com/#nodes) cuenta con buenos recursos para encontrar nodos. Uno de los métodos más fáciles

View file

@ -1,4 +1,4 @@
{% include disclaimer.html translated="yes" translationOutdated="no" %}
{% include disclaimer.html translated="yes" translationOutdated="yes" %}
## Trouver un nœud
Commencez par le commencement, vous devez trouver un nœud auquel vous connecter ! [moneroworld.com](https://moneroworld.com/#nodes) propose quelques bonnes ressources pour trouver

View file

@ -1,11 +1,43 @@
{% include disclaimer.html translated="no" translationOutdated="no" %}
## Finding a node
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
## Check if your wallet is in advanced mode
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
## Connecting to the node from the GUI wallet
After you enter your password for your wallet, you will see a pop up that will give you the option to "use custom settings". Click on it. You will then be
sent to the "Impostazioni > Nodo" page in the GUI. At this point you could choose 'Remote Node' see four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old ip address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionnaly, fill the username and password if your remote note requires them.
### Your screen should look a bit like this
![Node](png/remote_node/remote-node-screenshot.png){:width="600px"}
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
If your wallet is already in Advanced mode, you can skip the next step.
![Wallet mode](png/remote_node/wallet_mode_info.png){:width="600px"}
## Change your wallet to advanced mode
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
![Close Wallet](png/remote_node/close_open_wallet.png){:width="600px"}
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
![Change Wallet Mode](png/remote_node/change_wallet_mode.png){:width="600px"}
![Advanced Mode](png/remote_node/advanced_mode.png){:width="600px"}
## Finding a public remote node
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
## Configuring your wallet to connect to a custom public remote node
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
If you don't see this pop up, go to `Settings` > `Node` page.
![Configure Remote Node](png/remote_node/remote_node_config.png){:width="600px"}
On this page select `Remote Node`.
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
Finally, click on `Connect` button and wait for your wallet to connect.

View file

@ -1,4 +1,4 @@
{% include disclaimer.html translated="yes" translationOutdated="no" %}
{% include disclaimer.html translated="yes" translationOutdated="yes" %}
## Een node vinden
Eerst moet je natuurlijk een node vinden om verbinding mee te maken! [moneroworld.com](https://moneroworld.com/#nodes) biedt uitstekende hulpmiddelen voor het vinden van nodes. Een van de eenvoudigste methoden

View file

@ -1,4 +1,4 @@
{% include disclaimer.html translated="yes" translationOutdated="no" %}
{% include disclaimer.html translated="yes" translationOutdated="yes" %}
## Wyszukiwanie węzła

View file

@ -1,11 +1,43 @@
{% include disclaimer.html translated="no" translationOutdated="no" %}
## Finding a node
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
## Check if your wallet is in advanced mode
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
## Connecting to the node from the GUI wallet
After you enter your password for your wallet, you will see a pop up that will give you the option to "use custom settings". Click on it. You will then be
sent to the "Settings > Node" page in the GUI. At this point you could choose 'Remote Node' see four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old ip address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionnaly, fill the username and password if your remote note requires them.
### Your screen should look a bit like this
![Node](png/remote_node/remote-node-screenshot.png){:width="600px"}
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
If your wallet is already in Advanced mode, you can skip the next step.
![Wallet mode](png/remote_node/wallet_mode_info.png){:width="600px"}
## Change your wallet to advanced mode
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
![Close Wallet](png/remote_node/close_open_wallet.png){:width="600px"}
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
![Change Wallet Mode](png/remote_node/change_wallet_mode.png){:width="600px"}
![Advanced Mode](png/remote_node/advanced_mode.png){:width="600px"}
## Finding a public remote node
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
## Configuring your wallet to connect to a custom public remote node
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
If you don't see this pop up, go to `Settings` > `Node` page.
![Configure Remote Node](png/remote_node/remote_node_config.png){:width="600px"}
On this page select `Remote Node`.
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
Finally, click on `Connect` button and wait for your wallet to connect.

View file

@ -1,4 +1,4 @@
{% include disclaimer.html translated="yes" translationOutdated="no" %}
{% include disclaimer.html translated="yes" translationOutdated="yes" %}
## Как найти узел
Перво-наперво необходимо найти узел, к которому можно будет подключится! На веб-сайте [moneroworld.com](https://moneroworld.com/#nodes) предлагается множество способов для поиска узлов. Один из самых простых заключается в использовании узла, поддерживаемого самим сайтом, но вы также можете воспользоваться и инструментом, позволяющим найти случайные узлы.

View file

@ -1,11 +1,43 @@
{% include disclaimer.html translated="no" translationOutdated="no" %}
## Finding a node
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
## Check if your wallet is in advanced mode
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
## Connecting to the node from the GUI wallet
After you enter your password for your wallet, you will see a pop up that will give you the option to "use custom settings". Click on it. You will then be
sent to the "Settings > Node" page in the GUI. At this point you could choose 'Remote Node' see four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old ip address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionnaly, fill the username and password if your remote note requires them.
### Your screen should look a bit like this
<img src="png/remote_node/remote-node-screenshot.png" width="(600)">
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
If your wallet is already in Advanced mode, you can skip the next step.
![Wallet mode](png/remote_node/wallet_mode_info.png){:width="600px"}
## Change your wallet to advanced mode
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
![Close Wallet](png/remote_node/close_open_wallet.png){:width="600px"}
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
![Change Wallet Mode](png/remote_node/change_wallet_mode.png){:width="600px"}
![Advanced Mode](png/remote_node/advanced_mode.png){:width="600px"}
## Finding a public remote node
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
## Configuring your wallet to connect to a custom public remote node
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
If you don't see this pop up, go to `Settings` > `Node` page.
![Configure Remote Node](png/remote_node/remote_node_config.png){:width="600px"}
On this page select `Remote Node`.
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
Finally, click on `Connect` button and wait for your wallet to connect.

View file

@ -1,11 +1,43 @@
{% include disclaimer.html translated="no" translationOutdated="no" %}
## Finding a node
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
## Check if your wallet is in advanced mode
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
## Connecting to the node from the GUI wallet
After you enter your password for your wallet, you will see a pop up that will give you the option to "use custom settings". Click on it. You will then be
sent to the "Settings > Node" page in the GUI. At this point you could choose 'Remote Node' see four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old ip address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionnaly, fill the username and password if your remote note requires them.
### Your screen should look a bit like this
![Node](png/remote_node/remote-node-screenshot.png){:width="600px"}
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
If your wallet is already in Advanced mode, you can skip the next step.
![Wallet mode](png/remote_node/wallet_mode_info.png){:width="600px"}
## Change your wallet to advanced mode
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
![Close Wallet](png/remote_node/close_open_wallet.png){:width="600px"}
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
![Change Wallet Mode](png/remote_node/change_wallet_mode.png){:width="600px"}
![Advanced Mode](png/remote_node/advanced_mode.png){:width="600px"}
## Finding a public remote node
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
## Configuring your wallet to connect to a custom public remote node
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
If you don't see this pop up, go to `Settings` > `Node` page.
![Configure Remote Node](png/remote_node/remote_node_config.png){:width="600px"}
On this page select `Remote Node`.
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
Finally, click on `Connect` button and wait for your wallet to connect.

View file

@ -1,11 +1,43 @@
{% include disclaimer.html translated="no" translationOutdated="no" %}
## Finding a node
First things first, you need to find a node to connect to! [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods
would be to use a node run by moneroworld, but they have a tool for finding random nodes too.
## Check if your wallet is in advanced mode
To use a custom remote node, your wallet must be in advanced mode. Simple mode and Simple mode (bootstrap) don't support this feature.
## Connecting to the node from the GUI wallet
After you enter your password for your wallet, you will see a pop up that will give you the option to "use custom settings". Click on it. You will then be
sent to the "Settings > Node" page in the GUI. At this point you could choose 'Remote Node' see four text boxes labeled "Address", "Port", "Daemon username" and "Daemon password". Fill the address of the node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any old ip address. Then fill the "Port" box with the node's port. The default port is `18081` but if you are using a random node the port that is used will vary. The port for node.moneroworld.com uses 18089. Optionnaly, fill the username and password if your remote note requires them.
### Your screen should look a bit like this
![Node](png/remote_node/remote-node-screenshot.png){:width="600px"}
To check if your wallet is in advanced mode, go to `Settings` > `Info` and see `Wallet mode`.
If your wallet is not in Advanced mode, you will have to change it to Advanced mode (see next step).
If your wallet is already in Advanced mode, you can skip the next step.
![Wallet mode](png/remote_node/wallet_mode_info.png){:width="600px"}
## Change your wallet to advanced mode
If your wallet is open, you need to close it first. Go to `Settings` > `Wallet` > `Close this wallet`
![Close Wallet](png/remote_node/close_open_wallet.png){:width="600px"}
The main menu (`Welcome to Monero` screen) will open. At the bottom left, click on `Change wallet mode` button, and on the next page select `Advanced mode`. Next, open your wallet file again.
![Change Wallet Mode](png/remote_node/change_wallet_mode.png){:width="600px"}
![Advanced Mode](png/remote_node/advanced_mode.png){:width="600px"}
## Finding a public remote node
First, you will need to find a public remote node to connect to. The website [moneroworld.com](https://moneroworld.com/#nodes) has some great resources for finding nodes. One of the easiest methods would be to use a public remote node run by moneroworld, but they have a tool for finding random nodes too.
## Configuring your wallet to connect to a custom public remote node
When opening your wallet, a pop up will appear with the option `Use custom settings`. Click on it, and you will be sent to `Settings` > `Node` page.
If you don't see this pop up, go to `Settings` > `Node` page.
![Configure Remote Node](png/remote_node/remote_node_config.png){:width="600px"}
On this page select `Remote Node`.
In `Address` you should fill the address of the remote node that you want to connect to. This address might look like `node.moneroworld.com` or it could look like any IP address.
In `Port` you should fill the port of the remote node. If a remote node is listed as `node.moneroworld.com:18089`, the address is `node.moneroworld.com` and the port is `18089`. The default port is `18081`, but it can vary depending on the node you are connecting to.
If your remote node requires authentication, you can enter a username in `Daemon username` and a password in `Daemon password`.
Finally, click on `Connect` button and wait for your wallet to connect.

Binary file not shown.

After

Width:  |  Height:  |  Size: 33 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 2.7 KiB

After

Width:  |  Height:  |  Size: 40 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 135 KiB

After

Width:  |  Height:  |  Size: 52 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 152 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 53 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 51 KiB