2022-03-01 11:16:17 +00:00
# Copyright (c) 2014-2022, The Monero Project
2015-12-14 04:54:39 +00:00
#
2014-09-11 06:25:07 +00:00
# All rights reserved.
2015-12-14 04:54:39 +00:00
#
2014-09-11 06:25:07 +00:00
# Redistribution and use in source and binary forms, with or without modification, are
# permitted provided that the following conditions are met:
2015-12-14 04:54:39 +00:00
#
2014-09-11 06:25:07 +00:00
# 1. Redistributions of source code must retain the above copyright notice, this list of
# conditions and the following disclaimer.
2015-12-14 04:54:39 +00:00
#
2014-09-11 06:25:07 +00:00
# 2. Redistributions in binary form must reproduce the above copyright notice, this list
# of conditions and the following disclaimer in the documentation and/or other
# materials provided with the distribution.
2015-12-14 04:54:39 +00:00
#
2014-09-11 06:25:07 +00:00
# 3. Neither the name of the copyright holder nor the names of its contributors may be
# used to endorse or promote products derived from this software without specific
# prior written permission.
2015-12-14 04:54:39 +00:00
#
2014-09-11 06:25:07 +00:00
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
2015-12-14 04:54:39 +00:00
#
2014-09-11 06:25:07 +00:00
# Parts of this file are originally copyright (c) 2012-2013 The Cryptonote developers
2019-09-05 15:27:12 +00:00
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
2017-12-22 21:48:31 +00:00
list(INSERT CMAKE_MODULE_PATH 0
2020-05-24 16:43:33 +00:00
"${CMAKE_CURRENT_SOURCE_DIR}/cmake")
2017-12-22 21:48:31 +00:00
include(CheckCCompilerFlag)
include(CheckCXXCompilerFlag)
include(CheckLinkerFlag)
include(CheckLibraryExists)
2018-01-28 08:57:51 +00:00
include(CheckFunctionExists)
2019-06-08 23:58:11 +00:00
include(FindPythonInterp)
2017-12-22 21:48:31 +00:00
2017-04-02 10:19:25 +00:00
if (IOS)
INCLUDE(CmakeLists_IOS.txt)
endif()
2014-09-11 06:25:07 +00:00
2021-04-25 23:27:02 +00:00
cmake_minimum_required(VERSION 3.5)
2018-10-13 09:46:19 +00:00
message(STATUS "CMake version ${CMAKE_VERSION}")
2014-03-03 22:07:58 +00:00
2016-09-03 19:38:20 +00:00
project(monero)
2014-10-23 18:03:54 +00:00
2020-05-04 07:46:31 +00:00
option (USE_CCACHE "Use ccache if a usable instance is found" ON)
if (USE_CCACHE)
include(FindCcache) # Has to be included after the project() macro, to be able to read the CXX variable.
else()
message(STATUS "ccache deselected")
endif()
2020-11-01 08:36:10 +00:00
option (USE_COMPILATION_TIME_PROFILER "Use compilation time profiler (for CLang >= 9 only)" OFF)
if (USE_COMPILATION_TIME_PROFILER)
if (NOT "${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang")
message(FATAL_ERROR "The flag USE_COMPILATION_TIME_PROFILER is meant to be set only for CLang compiler!")
endif()
add_compile_options("-ftime-trace")
endif()
2020-04-15 18:38:23 +00:00
2020-08-05 17:39:44 +00:00
if (${CMAKE_VERSION} VERSION_GREATER "3.0.0" AND CMAKE_MAKE_PROGRAM MATCHES "ninja")
set(MONERO_PARALLEL_COMPILE_JOBS "" CACHE STRING "The maximum number of concurrent compilation jobs.")
if (MONERO_PARALLEL_COMPILE_JOBS)
set_property(GLOBAL APPEND PROPERTY JOB_POOLS compile_job_pool=${MONERO_PARALLEL_COMPILE_JOBS})
set(CMAKE_JOB_POOL_COMPILE compile_job_pool)
endif ()
set(MONERO_PARALLEL_LINK_JOBS "" CACHE STRING "The maximum number of concurrent link jobs.")
if (MONERO_PARALLEL_LINK_JOBS)
set_property(GLOBAL APPEND PROPERTY JOB_POOLS link_job_pool=${MONERO_PARALLEL_LINK_JOBS})
set(CMAKE_JOB_POOL_LINK link_job_pool)
endif ()
2020-11-04 18:27:06 +00:00
endif ()
option (USE_CLANG_TIDY_C "Lint the code with clang-tidy - variant C" OFF)
option (USE_CLANG_TIDY_CXX "Lint the code with clang-tidy - variant C++" OFF)
if (USE_CLANG_TIDY_C AND USE_CLANG_TIDY_CXX)
message(FATAL_ERROR "Enabling both USE_CLANG_TIDY_C and USE_CLANG_TIDY_CXX simultaneously crashes clang-tidy.")
endif()
if (USE_CLANG_TIDY_C OR USE_CLANG_TIDY_CXX)
include(SetClangTidy)
endif()
if (USE_CLANG_TIDY_C)
monero_clang_tidy("C")
elseif (USE_CLANG_TIDY_CXX)
monero_clang_tidy("CXX")
2020-08-05 17:39:44 +00:00
endif()
2019-02-16 17:47:08 +00:00
enable_language(C ASM)
2021-09-15 06:28:24 +00:00
# Require C11/C++11 and disable extensions for all targets
set(CMAKE_C_STANDARD 11)
set(CMAKE_C_STANDARD_REQUIRED ON)
set(CMAKE_C_EXTENSIONS OFF)
2021-09-15 16:26:33 +00:00
set(CMAKE_CXX_STANDARD 14)
2021-09-15 06:28:24 +00:00
set(CMAKE_CXX_STANDARD_REQUIRED ON)
set(CMAKE_CXX_EXTENSIONS OFF)
2014-10-21 17:33:26 +00:00
function (die msg)
if (NOT WIN32)
string(ASCII 27 Esc)
set(ColourReset "${Esc}[m")
set(BoldRed "${Esc}[1;31m")
else ()
set(ColourReset "")
set(BoldRed "")
endif ()
message(FATAL_ERROR "${BoldRed}${msg}${ColourReset}")
endfunction ()
2014-09-29 18:13:15 +00:00
2017-12-22 21:48:31 +00:00
function (add_c_flag_if_supported flag var)
2021-08-11 14:24:17 +00:00
# Prepending the flag with -Werror will only add the flag,
# if it doesn't result in generation of a warning of using a flag unknown to the compiler.
2021-05-12 19:32:51 +00:00
set(TMP "-Werror ${flag}")
string(REGEX REPLACE "[- ]" "_" supported ${TMP}_c)
check_c_compiler_flag(${TMP} ${supported})
2017-12-22 21:48:31 +00:00
if(${${supported}})
set(${var} "${${var}} ${flag}" PARENT_SCOPE)
endif()
endfunction()
function (add_cxx_flag_if_supported flag var)
2021-05-12 19:32:51 +00:00
set(TMP "-Werror ${flag}")
string(REGEX REPLACE "[- ]" "_" supported ${TMP}_cxx)
check_cxx_compiler_flag(${TMP} ${supported})
2017-12-22 21:48:31 +00:00
if(${${supported}})
set(${var} "${${var}} ${flag}" PARENT_SCOPE)
endif()
endfunction()
function (add_linker_flag_if_supported flag var)
string(REPLACE "-" "_" supported ${flag}_ld)
string(REPLACE "," "_" supported ${flag}_ld)
check_linker_flag(${flag} ${supported})
if(${${supported}})
set(${var} "${${var}} ${flag}" PARENT_SCOPE)
endif()
endfunction()
2018-01-28 08:57:51 +00:00
function (add_definition_if_function_found function var)
string(REPLACE "-" "_" supported ${function}_function)
check_function_exists(${function} ${supported})
if(${${supported}})
add_definitions("-D${var}")
endif()
endfunction()
function (add_definition_if_library_exists library function header var)
string(REPLACE "-" "_" supported ${function}_library)
check_library_exists(${library} ${function} ${header} ${supported})
if(${${supported}})
add_definitions("-D${var}")
endif()
endfunction()
2020-10-26 19:53:21 +00:00
option(RELINK_TARGETS "Relink targets, when just a dependant .so changed, but not its header?" OFF)
function (monero_set_target_no_relink target)
if (RELINK_TARGETS MATCHES OFF)
# Will not relink the target, when just its dependant .so has changed, but not it's interface
set_target_properties("${target}" PROPERTIES LINK_DEPENDS_NO_SHARED true)
endif()
endfunction()
2021-06-10 19:16:58 +00:00
option(STRIP_TARGETS "Strip symbols from targets?" OFF)
function (monero_set_target_strip target)
if (STRIP_TARGETS)
set_target_properties("${target}" PROPERTIES LINK_FLAGS_RELEASE -s)
set_target_properties("${target}" PROPERTIES LINK_FLAGS_DEBUG -s)
# Stripping from Debug might make sense if you're low on disk space, but want to test if debug version builds properly.
endif()
endfunction()
2020-10-26 19:53:21 +00:00
function (monero_add_minimal_executable name)
source_group("${name}"
FILES
${ARGN})
add_executable("${name}"
${ARGN})
2021-06-10 19:16:58 +00:00
monero_set_target_no_relink("${name}")
monero_set_target_strip ("${name}")
2020-10-26 19:53:21 +00:00
endfunction()
2021-04-16 06:50:52 +00:00
# Finds all headers in a directory and its subdirs, to be able to search for them and autosave in IDEs.
#
# Parameters:
# - headers_found: Output variable, which will hold the found headers
2021-05-14 13:29:57 +00:00
# - module_root_dir: The search path for the headers. Typically it will be the module's root dir, so "${CMAKE_CURRENT_SOURCE_DIR}" or a derivative of it.
2021-04-16 06:50:52 +00:00
macro (monero_find_all_headers headers_found module_root_dir)
file(GLOB ${headers_found}
"${module_root_dir}/*.h*" # h* will include hpps as well.
"${module_root_dir}/**/*.h*" # Any number of subdirs will be included.
2021-05-14 13:29:57 +00:00
"${module_root_dir}/*.inl" # .inl is typically template code and is being treated as headers (it's being included).
"${module_root_dir}/**/*.inl"
2021-04-16 06:50:52 +00:00
)
endmacro()
2021-04-27 12:06:42 +00:00
# Function to forbid undefined symbols and also verify
# 1) Test project with all types of libraries and without undefined symbols can compile successfully
# 2) Test project with all types of libraries and undefined symbols can not compile successfully
function(forbid_undefined_symbols)
unset(TMP)
# https://www.unix.com/man-page/linux/1/ld, --no-undefined, Report unresolved symbol references from regular object files.
add_linker_flag_if_supported(-Wl,--no-undefined TMP)
# https://www.unix.com/man-page/osx/1/ld/, -undefined, Specifies how undefined symbols are to be treated.
add_linker_flag_if_supported(-Wl,-undefined,error TMP)
string(APPEND CMAKE_SHARED_LINKER_FLAGS ${TMP})
string(APPEND CMAKE_MODULE_LINKER_FLAGS ${TMP})
set(CMAKE_SHARED_LINKER_FLAGS ${CMAKE_SHARED_LINKER_FLAGS} PARENT_SCOPE)
set(CMAKE_MODULE_LINKER_FLAGS ${CMAKE_MODULE_LINKER_FLAGS} PARENT_SCOPE)
set(TEST_PROJECT "${CMAKE_BINARY_DIR}/${CMAKE_FILES_DIRECTORY}/CMakeTmp/test_project")
foreach(EXPECT IN ITEMS TRUE FALSE)
file(REMOVE_RECURSE "${TEST_PROJECT}")
file(MAKE_DIRECTORY "${TEST_PROJECT}")
file(WRITE "${TEST_PROJECT}/CMakeLists.txt"
[=[
cmake_minimum_required(VERSION 3.1)
project(test)
option(EXPECT_SUCCESS "" ON)
file(WRITE "${CMAKE_SOURCE_DIR}/incorrect_source.cpp" "void undefined_symbol(); void symbol() { undefined_symbol(); }")
if (EXPECT_SUCCESS)
file(APPEND "${CMAKE_SOURCE_DIR}/incorrect_source.cpp" " void undefined_symbol() {}; ")
endif()
add_library(l0 SHARED incorrect_source.cpp)
add_library(l1 MODULE incorrect_source.cpp)
add_library(l2 STATIC incorrect_source.cpp)
add_library(l3 OBJECT incorrect_source.cpp)
]=]
)
try_compile(SUCCESS "${TEST_PROJECT}/build" "${TEST_PROJECT}" test
CMAKE_FLAGS
"-DCMAKE_SHARED_LINKER_FLAGS=${CMAKE_SHARED_LINKER_FLAGS}"
"-DCMAKE_MODULE_LINKER_FLAGS=${CMAKE_MODULE_LINKER_FLAGS}"
"-DEXPECT_SUCCESS=${EXPECT}"
)
if (NOT ${SUCCESS} STREQUAL ${EXPECT})
message(FATAL_ERROR "Undefined symbols test failure: expect(${EXPECT}), success(${SUCCESS})")
endif()
file(REMOVE_RECURSE "${TEST_PROJECT}")
endforeach()
endfunction()
2021-07-31 19:22:57 +00:00
if (NOT (CMAKE_SYSTEM_NAME MATCHES "kOpenBSD.*|OpenBSD.*") AND NOT OSSFUZZ)
2021-07-27 23:17:40 +00:00
forbid_undefined_symbols()
endif()
2021-04-27 12:06:42 +00:00
2021-04-27 12:06:42 +00:00
if (MINGW)
function(export_all_symbols)
unset(TMP)
add_linker_flag_if_supported(-Wl,--export-all-symbols TMP)
string(APPEND CMAKE_SHARED_LINKER_FLAGS ${TMP})
string(APPEND CMAKE_MODULE_LINKER_FLAGS ${TMP})
set(CMAKE_SHARED_LINKER_FLAGS ${CMAKE_SHARED_LINKER_FLAGS} PARENT_SCOPE)
set(CMAKE_MODULE_LINKER_FLAGS ${CMAKE_MODULE_LINKER_FLAGS} PARENT_SCOPE)
endfunction()
export_all_symbols()
endif()
2016-08-28 10:53:46 +00:00
if(NOT CMAKE_BUILD_TYPE)
set(CMAKE_BUILD_TYPE Release CACHE STRING "Build type" FORCE)
message(STATUS "Setting default build type: ${CMAKE_BUILD_TYPE}")
endif()
2016-09-17 18:03:51 +00:00
string(TOLOWER ${CMAKE_BUILD_TYPE} CMAKE_BUILD_TYPE_LOWER)
2016-08-28 10:53:46 +00:00
2016-08-28 05:37:34 +00:00
# ARCH defines the target architecture, either by an explicit identifier or
# one of the following two keywords. By default, ARCH a value of 'native':
# target arch = host arch, binary is not portable. When ARCH is set to the
# string 'default', no -march arg is passed, which creates a binary that is
# portable across processors in the same family as host processor. In cases
# when ARCH is not set to an explicit identifier, cmake's builtin is used
# to identify the target architecture, to direct logic in this cmake script.
# Since ARCH is a cached variable, it will not be set on first cmake invocation.
2019-09-25 03:28:20 +00:00
if (NOT ARCH_ID)
2016-08-28 05:37:34 +00:00
if (NOT ARCH OR ARCH STREQUAL "" OR ARCH STREQUAL "native" OR ARCH STREQUAL "default")
2019-02-22 15:18:32 +00:00
if(CMAKE_SYSTEM_PROCESSOR STREQUAL "")
set(CMAKE_SYSTEM_PROCESSOR ${CMAKE_HOST_SYSTEM_PROCESSOR})
endif()
2016-08-28 05:37:34 +00:00
set(ARCH_ID "${CMAKE_SYSTEM_PROCESSOR}")
else()
set(ARCH_ID "${ARCH}")
2016-06-22 00:07:19 +00:00
endif()
2019-09-25 03:28:20 +00:00
endif()
2016-09-17 18:31:25 +00:00
string(TOLOWER "${ARCH_ID}" ARM_ID)
2016-09-18 21:56:38 +00:00
string(SUBSTRING "${ARM_ID}" 0 3 ARM_TEST)
2016-08-28 11:28:05 +00:00
if (ARM_TEST STREQUAL "arm")
set(ARM 1)
2016-09-18 21:56:38 +00:00
string(SUBSTRING "${ARM_ID}" 0 5 ARM_TEST)
2016-08-28 11:28:05 +00:00
if (ARM_TEST STREQUAL "armv6")
set(ARM6 1)
endif()
if (ARM_TEST STREQUAL "armv7")
set(ARM7 1)
2015-12-14 04:54:39 +00:00
endif()
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
endif()
2017-04-12 22:54:33 +00:00
if (ARM_ID STREQUAL "aarch64" OR ARM_ID STREQUAL "arm64" OR ARM_ID STREQUAL "armv8-a")
2016-08-29 10:13:55 +00:00
set(ARM 1)
set(ARM8 1)
2017-04-12 22:54:33 +00:00
set(ARCH "armv8-a")
2016-08-29 10:13:55 +00:00
endif()
2017-06-27 17:06:01 +00:00
if(ARCH_ID STREQUAL "ppc64le")
set(PPC64LE 1)
2018-05-19 22:03:59 +00:00
set(PPC64 0)
set(PPC 0)
endif()
if(ARCH_ID STREQUAL "powerpc64" OR ARCH_ID STREQUAL "ppc64")
set(PPC64LE 0)
set(PPC64 1)
set(PPC 0)
2017-06-27 17:06:01 +00:00
endif()
2018-11-01 03:11:09 +00:00
if(ARCH_ID STREQUAL "powerpc" OR ARCH_ID STREQUAL "ppc")
2018-05-19 22:03:59 +00:00
set(PPC64LE 0)
set(PPC64 0)
set(PPC 1)
endif()
2018-05-01 05:13:10 +00:00
if(ARCH_ID STREQUAL "s390x")
set(S390X 1)
endif()
2021-12-22 07:41:46 +00:00
if(ARCH_ID STREQUAL "riscv64")
set(RISCV 1)
set(RISCV64 1)
endif()
if(ARCH_ID STREQUAL "riscv32")
set(RISCV 1)
set(RISCV32 1)
endif()
2018-05-19 22:03:59 +00:00
if(WIN32 OR ARM OR PPC64LE OR PPC64 OR PPC)
2016-07-29 03:34:05 +00:00
set(OPT_FLAGS_RELEASE "-O2")
2016-01-02 19:39:03 +00:00
else()
2016-07-29 03:34:05 +00:00
set(OPT_FLAGS_RELEASE "-Ofast")
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
endif()
2017-02-18 16:30:29 +00:00
# BUILD_TAG is used to select the build type to check for a new version
if(BUILD_TAG)
message(STATUS "Building build tag ${BUILD_TAG}")
add_definitions("-DBUILD_TAG=${BUILD_TAG}")
else()
message(STATUS "Building without build tag")
endif()
2018-10-04 13:07:00 +00:00
if(NOT MANUAL_SUBMODULES)
find_package(Git)
if(GIT_FOUND)
2018-10-16 14:43:56 +00:00
function (check_submodule relative_path)
2018-10-30 05:04:57 +00:00
execute_process(COMMAND git rev-parse "HEAD" WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/${relative_path} OUTPUT_VARIABLE localHead)
execute_process(COMMAND git rev-parse "HEAD:${relative_path}" WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} OUTPUT_VARIABLE checkedHead)
2018-10-16 14:43:56 +00:00
string(COMPARE EQUAL "${localHead}" "${checkedHead}" upToDate)
if (upToDate)
message(STATUS "Submodule '${relative_path}' is up-to-date")
else()
2019-04-20 12:59:31 +00:00
message(FATAL_ERROR "Submodule '${relative_path}' is not up-to-date. Please update all submodules with\ngit submodule update --init --force\nor run cmake with -DMANUAL_SUBMODULES=1\n")
2018-10-16 14:43:56 +00:00
endif()
endfunction ()
2018-10-04 13:07:00 +00:00
message(STATUS "Checking submodules")
2018-10-16 14:43:56 +00:00
check_submodule(external/miniupnp)
check_submodule(external/rapidjson)
2018-08-23 21:50:53 +00:00
check_submodule(external/trezor-common)
2019-04-23 19:32:27 +00:00
check_submodule(external/randomx)
2019-11-15 14:08:28 +00:00
check_submodule(external/supercop)
2018-10-04 13:07:00 +00:00
endif()
endif()
2016-07-29 03:34:05 +00:00
set(CMAKE_C_FLAGS_RELEASE "-DNDEBUG ${OPT_FLAGS_RELEASE}")
set(CMAKE_CXX_FLAGS_RELEASE "-DNDEBUG ${OPT_FLAGS_RELEASE}")
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
# set this to 0 if per-block checkpoint needs to be disabled
set(PER_BLOCK_CHECKPOINT 1)
if(PER_BLOCK_CHECKPOINT)
add_definitions("-DPER_BLOCK_CHECKPOINT")
2018-10-09 12:33:39 +00:00
set(Blocks "blocks")
else()
set(Blocks "")
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
endif()
2014-10-22 19:17:52 +00:00
list(INSERT CMAKE_MODULE_PATH 0
"${CMAKE_SOURCE_DIR}/cmake")
2014-09-17 22:37:32 +00:00
2014-09-22 10:09:46 +00:00
if (NOT DEFINED ENV{DEVELOPER_LOCAL_TOOLS})
2014-10-21 18:24:49 +00:00
message(STATUS "Could not find DEVELOPER_LOCAL_TOOLS in env (not required)")
2015-02-12 19:59:39 +00:00
set(BOOST_IGNORE_SYSTEM_PATHS_DEFAULT OFF)
elseif ("$ENV{DEVELOPER_LOCAL_TOOLS}" EQUAL 1)
2014-10-21 18:24:49 +00:00
message(STATUS "Found: env DEVELOPER_LOCAL_TOOLS = 1")
2015-02-12 19:59:39 +00:00
set(BOOST_IGNORE_SYSTEM_PATHS_DEFAULT ON)
2014-09-22 10:09:46 +00:00
else()
2014-10-21 18:24:49 +00:00
message(STATUS "Found: env DEVELOPER_LOCAL_TOOLS = 0")
2015-02-12 19:59:39 +00:00
set(BOOST_IGNORE_SYSTEM_PATHS_DEFAULT OFF)
2014-09-22 10:09:46 +00:00
endif()
2014-09-29 18:13:15 +00:00
2015-02-12 19:59:39 +00:00
message(STATUS "BOOST_IGNORE_SYSTEM_PATHS defaults to ${BOOST_IGNORE_SYSTEM_PATHS_DEFAULT}")
option(BOOST_IGNORE_SYSTEM_PATHS "Ignore boost system paths for local boost installation" ${BOOST_IGNORE_SYSTEM_PATHS_DEFAULT})
2014-09-22 10:09:46 +00:00
2014-03-03 22:07:58 +00:00
set_property(GLOBAL PROPERTY USE_FOLDERS ON)
enable_testing()
2015-04-01 17:00:45 +00:00
option(BUILD_DOCUMENTATION "Build the Doxygen documentation." ON)
2017-10-09 00:45:45 +00:00
option(BUILD_TESTS "Build tests." OFF)
2019-04-16 12:46:01 +00:00
if (CMAKE_BUILD_TYPE STREQUAL "Debug")
set(DEFAULT_BUILD_DEBUG_UTILITIES ON)
else()
set(DEFAULT_BUILD_DEBUG_UTILITIES OFF)
endif()
option(BUILD_DEBUG_UTILITIES "Build debug utilities." DEFAULT_BUILD_DEBUG_UTILITIES)
2015-04-01 17:00:45 +00:00
2020-05-15 17:17:24 +00:00
if(OSSFUZZ)
message(STATUS "Using OSS-Fuzz fuzzing system")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DOSSFUZZ")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DOSSFUZZ")
endif()
2015-03-02 15:10:16 +00:00
# Check whether we're on a 32-bit or 64-bit system
if(CMAKE_SIZEOF_VOID_P EQUAL "8")
2015-03-02 16:04:58 +00:00
set(DEFAULT_BUILD_64 ON)
2015-03-02 15:10:16 +00:00
else()
2015-03-02 16:04:58 +00:00
set(DEFAULT_BUILD_64 OFF)
endif()
2015-03-03 19:57:40 +00:00
option(BUILD_64 "Build for 64-bit? 'OFF' builds for 32-bit." ${DEFAULT_BUILD_64})
2015-03-02 16:04:58 +00:00
if(BUILD_64)
set(ARCH_WIDTH "64")
else()
set(ARCH_WIDTH "32")
2015-03-02 15:10:16 +00:00
endif()
2015-03-02 15:20:42 +00:00
message(STATUS "Building for a ${ARCH_WIDTH}-bit system")
2015-04-01 17:00:45 +00:00
2014-09-09 12:03:42 +00:00
# Check if we're on FreeBSD so we can exclude the local miniupnpc (it should be installed from ports instead)
# CMAKE_SYSTEM_NAME checks are commonly known, but specifically taken from libsdl's CMakeLists
2016-12-15 10:27:53 +00:00
if(CMAKE_SYSTEM_NAME MATCHES "kFreeBSD.*|FreeBSD")
2014-09-09 12:03:42 +00:00
set(FREEBSD TRUE)
endif()
2016-12-15 10:27:53 +00:00
# Check if we're on DragonFly BSD. See the README.md for build instructions.
if(CMAKE_SYSTEM_NAME MATCHES "DragonFly.*")
set(DRAGONFLY TRUE)
endif()
2016-01-21 18:34:02 +00:00
# Check if we're on OpenBSD. See the README.md for build instructions.
2016-01-21 18:18:26 +00:00
if(CMAKE_SYSTEM_NAME MATCHES "kOpenBSD.*|OpenBSD.*")
set(OPENBSD TRUE)
endif()
# TODO: check bsdi, NetBSD, to see if they need the same FreeBSD changes
2015-12-14 04:54:39 +00:00
#
2014-09-09 12:03:42 +00:00
# elseif(CMAKE_SYSTEM_NAME MATCHES "kNetBSD.*|NetBSD.*")
# set(NETBSD TRUE)
# elseif(CMAKE_SYSTEM_NAME MATCHES ".*BSDI.*")
# set(BSDI TRUE)
2019-11-15 14:08:28 +00:00
include_directories(external/rapidjson/include external/easylogging++ src contrib/epee/include external external/supercop/include)
2014-03-03 22:07:58 +00:00
2014-04-30 17:52:21 +00:00
if(APPLE)
2021-10-27 21:02:49 +00:00
cmake_policy(SET CMP0042 NEW)
2014-04-30 17:52:21 +00:00
endif()
2014-08-06 16:27:16 +00:00
if(MSVC OR MINGW)
set(DEFAULT_STATIC true)
else()
set(DEFAULT_STATIC false)
endif()
2014-10-21 18:20:26 +00:00
option(STATIC "Link libraries statically" ${DEFAULT_STATIC})
2014-03-03 22:07:58 +00:00
2016-09-17 18:03:51 +00:00
# This is a CMake built-in switch that concerns internal libraries
2022-04-02 14:19:57 +00:00
set(BUILD_SHARED_LIBS_DEFAULT OFF)
if (NOT STATIC AND CMAKE_BUILD_TYPE_LOWER STREQUAL "debug")
set(BUILD_SHARED_LIBS_DEFAULT ON)
2016-09-17 18:03:51 +00:00
endif()
2022-04-02 14:19:57 +00:00
option(BUILD_SHARED_LIBS "Build internal libraries as shared" ${BUILD_SHARED_LIBS_DEFAULT})
2016-11-11 00:35:58 +00:00
2016-09-17 18:03:51 +00:00
if (BUILD_SHARED_LIBS)
2016-11-11 00:35:58 +00:00
message(STATUS "Building internal libraries with position independent code")
2017-01-26 15:07:23 +00:00
add_definitions("-DBUILD_SHARED_LIBS")
2016-09-17 18:03:51 +00:00
else()
message(STATUS "Building internal libraries as static")
endif()
2017-12-22 21:48:31 +00:00
set(PIC_FLAG "-fPIC")
2016-09-17 18:03:51 +00:00
2014-11-17 23:09:21 +00:00
if(MINGW)
2015-07-18 02:49:22 +00:00
string(REGEX MATCH "^[^/]:/[^/]*" msys2_install_path "${CMAKE_C_COMPILER}")
message(STATUS "MSYS location: ${msys2_install_path}")
2015-03-02 15:20:42 +00:00
set(CMAKE_INCLUDE_PATH "${msys2_install_path}/mingw${ARCH_WIDTH}/include")
2014-11-18 22:04:47 +00:00
# This is necessary because otherwise CMake will make Boost libraries -lfoo
# rather than a full path. Unfortunately, this makes the shared libraries get
# linked due to a bug in CMake which misses putting -static flags around the
# -lfoo arguments.
2015-07-18 02:49:22 +00:00
set(DEFLIB ${msys2_install_path}/mingw${ARCH_WIDTH}/lib)
list(REMOVE_ITEM CMAKE_C_IMPLICIT_LINK_DIRECTORIES ${DEFLIB})
list(REMOVE_ITEM CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES ${DEFLIB})
2014-11-17 23:09:21 +00:00
endif()
2014-10-21 18:24:49 +00:00
if(STATIC)
if(MSVC)
set(CMAKE_FIND_LIBRARY_SUFFIXES .lib .dll.a .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
else()
set(CMAKE_FIND_LIBRARY_SUFFIXES .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
endif()
2017-09-19 23:47:24 +00:00
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DZMQ_STATIC")
2014-10-21 18:24:49 +00:00
endif()
2014-10-06 16:46:18 +00:00
2021-09-02 08:54:43 +00:00
option(SANITIZE "Use ASAN memory sanitizer" OFF)
2017-12-10 11:25:12 +00:00
if(SANITIZE)
if (MSVC)
message(FATAL_ERROR "Cannot sanitize with MSVC")
else()
message(STATUS "Using ASAN")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fsanitize=address")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fsanitize=address")
endif()
endif()
2017-03-08 13:29:08 +00:00
# Set default blockchain storage location:
2018-01-19 07:54:14 +00:00
# memory was the default in Cryptonote before Monero implemented LMDB, it still works but is unnecessary.
2015-01-26 05:36:09 +00:00
# set(DATABASE memory)
set(DATABASE lmdb)
2019-06-26 14:39:41 +00:00
message(STATUS "Using LMDB as default DB type")
set(BLOCKCHAIN_DB DB_LMDB)
add_definitions("-DDEFAULT_DB_TYPE=\"lmdb\"")
2015-01-26 05:36:09 +00:00
add_definitions("-DBLOCKCHAIN_DB=${BLOCKCHAIN_DB}")
2016-07-27 05:02:55 +00:00
# Can't install hook in static build on OSX, because OSX linker does not support --wrap
cmake: ARM: exclude libunwind in static build
Else error in build with STATIC=ON:
cd /home/redfish/bitmonero/build/release/src/miner && /usr/bin/cmake -E
cmake_link_script CMakeFiles/simpleminer.dir/link.txt --verbose=1
/usr/bin/c++ -std=c++11 -D_GNU_SOURCE -Wall -Wextra -Wpointer-arith
-Wundef -Wvla -Wwrite-strings -Wno-error=extra
-Wno-error=deprecated-declarations -Wno-unused-parameter
-Wno-unused-variable -Wno-error=unused-variable -Wno-error=undef
-Wno-error=uninitialized -Wlogical-op -Wno-error=maybe-uninitialized
-Wno-reorder -Wno-missing-field-initializers -march=armv7-a
-fno-strict-aliasing -mfloat-abi=hard -DNDEBUG -O2 -flto
-ffat-lto-objects -static-libgcc -static-libstdc++
-Wl,--wrap=__cxa_throw CMakeFiles/simpleminer.dir/simpleminer.cpp.o -o
../../bin/simpleminer -rdynamic -Wl,-Bstatic -lrt -Wl,-Bdynamic -ldl
../cryptonote_core/libcryptonote_core.a ../common/libcommon.a
-Wl,-Bstatic -lboost_filesystem -lboost_program_options -lboost_regex
-lboost_chrono -lboost_system -lboost_thread -Wl,-Bdynamic -pthread
-Wl,-Bstatic -lrt -Wl,-Bdynamic -ldl ../blockchain_db/libblockchain_db.a
../cryptonote_core/libcryptonote_core.a
../blockchain_db/libblockchain_db.a
../../contrib/otshell_utils/libotshell_utils.a ../blocks/libblocks.a
../common/libcommon.a ../../external/unbound/libunbound.a -lssl -lcrypto
-lunwind -Wl,-Bstatic -lboost_program_options ../crypto/libcrypto.a
-lboost_date_time -lboost_serialization -lboost_filesystem
../../external/db_drivers/liblmdb/liblmdb.a -Wl,-Bdynamic -pthread
-Wl,-Bstatic -lboost_chrono -lboost_system -lboost_thread -lrt
-Wl,-Bdynamic -ldl
/usr/bin/ld: ../../bin/simpleminer: hidden symbol
`__aeabi_unwind_cpp_pr0' in
/usr/lib/gcc/armv7l-unknown-linux-gnueabihf/6.1.1/libgcc_eh.a(unwind-arm.o)
is referenced by DSO
/usr/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
2016-08-28 11:12:36 +00:00
# On ARM, having libunwind package (with .so's only) installed breaks static link.
2017-10-07 16:13:31 +00:00
# When possible, avoid stack tracing using libunwind in favor of using easylogging++.
2017-02-04 12:33:03 +00:00
if (APPLE)
set(DEFAULT_STACK_TRACE OFF)
set(LIBUNWIND_LIBRARIES "")
2018-03-19 23:35:47 +00:00
elseif (DEPENDS AND NOT LINUX)
set(DEFAULT_STACK_TRACE OFF)
set(LIBUNWIND_LIBRARIES "")
2017-02-04 12:33:03 +00:00
elseif(CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT MINGW)
set(DEFAULT_STACK_TRACE ON)
2017-10-07 16:13:31 +00:00
set(STACK_TRACE_LIB "easylogging++") # for diag output only
2017-02-04 12:33:03 +00:00
set(LIBUNWIND_LIBRARIES "")
2020-09-22 14:22:06 +00:00
elseif (ARM)
2016-07-27 05:02:55 +00:00
set(DEFAULT_STACK_TRACE OFF)
2016-06-20 18:20:14 +00:00
set(LIBUNWIND_LIBRARIES "")
2017-01-09 13:38:54 +00:00
else()
find_package(Libunwind)
2017-02-04 12:33:03 +00:00
if(LIBUNWIND_FOUND)
set(DEFAULT_STACK_TRACE ON)
2017-10-07 16:13:31 +00:00
set(STACK_TRACE_LIB "libunwind") # for diag output only
2017-02-04 12:33:03 +00:00
else()
set(DEFAULT_STACK_TRACE OFF)
set(LIBUNWIND_LIBRARIES "")
endif()
2016-03-28 18:00:18 +00:00
endif()
2016-07-27 05:02:55 +00:00
option(STACK_TRACE "Install a hook that dumps stack on exception" ${DEFAULT_STACK_TRACE})
if(STACK_TRACE)
2017-10-07 16:13:31 +00:00
message(STATUS "Stack trace on exception enabled (using ${STACK_TRACE_LIB})")
2016-07-27 05:02:55 +00:00
else()
message(STATUS "Stack trace on exception disabled")
endif()
2017-09-20 00:38:43 +00:00
if (UNIX AND NOT APPLE)
# Note that at the time of this writing the -Wstrict-prototypes flag added below will make this fail
set(THREADS_PREFER_PTHREAD_FLAG ON)
find_package(Threads)
2018-10-13 18:11:09 +00:00
add_c_flag_if_supported(-pthread CMAKE_C_FLAGS)
add_cxx_flag_if_supported(-pthread CMAKE_CXX_FLAGS)
2017-09-20 00:38:43 +00:00
endif()
2017-06-20 15:22:24 +00:00
# Handle OpenSSL, used for sha256sum on binary updates and light wallet ssl http
2017-10-10 13:05:28 +00:00
if (CMAKE_SYSTEM_NAME MATCHES "(SunOS|Solaris)")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -pthreads")
endif ()
2017-04-02 10:19:25 +00:00
if (APPLE AND NOT IOS)
2021-09-15 06:28:24 +00:00
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fvisibility=default")
2020-06-25 17:52:10 +00:00
if (NOT OPENSSL_ROOT_DIR)
2017-02-21 15:11:12 +00:00
EXECUTE_PROCESS(COMMAND brew --prefix openssl
OUTPUT_VARIABLE OPENSSL_ROOT_DIR
OUTPUT_STRIP_TRAILING_WHITESPACE)
message(STATUS "Using OpenSSL found at ${OPENSSL_ROOT_DIR}")
endif()
endif()
find_package(OpenSSL REQUIRED)
2017-08-05 12:28:50 +00:00
message(STATUS "Using OpenSSL include dir at ${OPENSSL_INCLUDE_DIR}")
include_directories(${OPENSSL_INCLUDE_DIR})
2017-04-02 10:19:25 +00:00
if(STATIC AND NOT IOS)
2017-02-21 15:11:12 +00:00
if(UNIX)
2017-09-20 00:38:43 +00:00
set(OPENSSL_LIBRARIES "${OPENSSL_LIBRARIES};${CMAKE_DL_LIBS};${CMAKE_THREAD_LIBS_INIT}")
2017-02-21 15:11:12 +00:00
endif()
endif()
2021-04-27 12:06:42 +00:00
if (WIN32)
list(APPEND OPENSSL_LIBRARIES ws2_32 crypt32)
endif()
2018-08-01 07:24:53 +00:00
find_package(HIDAPI)
2018-02-20 16:01:27 +00:00
2018-01-28 08:57:51 +00:00
add_definition_if_library_exists(c memset_s "string.h" HAVE_MEMSET_S)
add_definition_if_library_exists(c explicit_bzero "strings.h" HAVE_EXPLICIT_BZERO)
add_definition_if_function_found(strptime HAVE_STRPTIME)
2017-05-17 01:17:08 +00:00
add_definitions(-DAUTO_INITIALIZE_EASYLOGGINGPP)
2019-11-15 14:08:28 +00:00
set(MONERO_GENERATED_HEADERS_DIR "${CMAKE_CURRENT_BINARY_DIR}/generated_include")
include_directories(${MONERO_GENERATED_HEADERS_DIR})
2021-07-28 00:31:31 +00:00
# As of OpenBSD 6.8, -march=<anything> breaks the build
function(set_default_arch)
if (OPENBSD)
set(ARCH default)
else()
set(ARCH native)
endif()
set(ARCH ${ARCH} CACHE STRING "CPU to build for: -march value or 'default' to not pass -march at all")
endfunction()
if (NOT (MSVC OR ARCH))
set_default_arch()
endif()
2021-04-01 17:50:35 +00:00
option(COVERAGE "Enable profiling for test coverage report" OFF)
if(COVERAGE)
message(STATUS "Building with profiling for test coverage report")
endif()
macro (monero_enable_coverage)
if(COVERAGE)
foreach(COV_FLAG -fprofile-arcs -ftest-coverage --coverage)
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${COV_FLAG}")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${COV_FLAG}")
endforeach()
endif()
endmacro()
2021-03-02 08:50:20 +00:00
function (monero_add_library name)
monero_add_library_with_deps(NAME "${name}" SOURCES ${ARGN})
endfunction()
function (monero_add_library_with_deps)
cmake_parse_arguments(MONERO_ADD_LIBRARY "" "NAME" "DEPENDS;SOURCES" ${ARGN})
source_group("${MONERO_ADD_LIBRARY_NAME}" FILES ${MONERO_ADD_LIBRARY_SOURCES})
# Define a ("virtual") object library and an actual library that links those
# objects together. The virtual libraries can be arbitrarily combined to link
# any subset of objects into one library archive. This is used for releasing
# libwallet, which combines multiple components.
set(objlib obj_${MONERO_ADD_LIBRARY_NAME})
add_library(${objlib} OBJECT ${MONERO_ADD_LIBRARY_SOURCES})
add_library("${MONERO_ADD_LIBRARY_NAME}" $<TARGET_OBJECTS:${objlib}>)
monero_set_target_no_relink("${MONERO_ADD_LIBRARY_NAME}")
2021-06-10 19:16:58 +00:00
monero_set_target_strip ("${MONERO_ADD_LIBRARY_NAME}")
2021-03-02 08:50:20 +00:00
if (MONERO_ADD_LIBRARY_DEPENDS)
add_dependencies(${objlib} ${MONERO_ADD_LIBRARY_DEPENDS})
endif()
set_property(TARGET "${MONERO_ADD_LIBRARY_NAME}" PROPERTY FOLDER "libs")
target_compile_definitions(${objlib}
PRIVATE $<TARGET_PROPERTY:${MONERO_ADD_LIBRARY_NAME},INTERFACE_COMPILE_DEFINITIONS>)
endfunction ()
2021-04-01 17:50:35 +00:00
2017-12-15 17:44:01 +00:00
# Generate header for embedded translations
2018-09-10 20:18:18 +00:00
# Generate header for embedded translations, use target toolchain if depends, otherwise use the
# lrelease and lupdate binaries from the host
include(ExternalProject)
ExternalProject_Add(generate_translations_header
SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/translations"
BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}/translations"
STAMP_DIR ${LRELEASE_PATH}
CMAKE_ARGS -DLRELEASE_PATH=${LRELEASE_PATH}
2021-01-02 23:17:45 +00:00
INSTALL_COMMAND ${CMAKE_COMMAND} -E echo "")
2017-12-15 17:44:01 +00:00
include_directories("${CMAKE_CURRENT_BINARY_DIR}/translations")
2019-09-24 20:09:17 +00:00
add_subdirectory(external)
2014-10-06 13:00:06 +00:00
# Final setup for libunbound
2021-07-07 00:51:14 +00:00
include_directories(${UNBOUND_INCLUDE_DIR})
2014-09-17 21:44:35 +00:00
2017-03-25 19:06:14 +00:00
# Final setup for easylogging++
include_directories(${EASYLOGGING_INCLUDE})
link_directories(${EASYLOGGING_LIBRARY_DIRS})
2014-12-01 19:15:50 +00:00
2015-01-18 23:30:31 +00:00
# Final setup for liblmdb
2014-12-06 15:47:49 +00:00
include_directories(${LMDB_INCLUDE})
2014-10-23 19:35:49 +00:00
2016-03-28 18:00:18 +00:00
# Final setup for libunwind
include_directories(${LIBUNWIND_INCLUDE})
link_directories(${LIBUNWIND_LIBRARY_DIRS})
2018-08-01 07:24:53 +00:00
# Final setup for hid
if (HIDAPI_FOUND)
message(STATUS "Using HIDAPI include dir at ${HIDAPI_INCLUDE_DIR}")
add_definitions(-DHAVE_HIDAPI)
include_directories(${HIDAPI_INCLUDE_DIR})
link_directories(${LIBHIDAPI_LIBRARY_DIRS})
2021-11-09 23:32:45 +00:00
else()
2018-08-01 07:24:53 +00:00
message(STATUS "Could not find HIDAPI")
2018-02-20 16:01:27 +00:00
endif()
2018-11-04 23:38:58 +00:00
# Trezor support check
include(CheckTrezor)
2018-08-23 21:50:53 +00:00
2014-03-03 22:07:58 +00:00
if(MSVC)
add_definitions("/bigobj /MP /W3 /GS- /D_CRT_SECURE_NO_WARNINGS /wd4996 /wd4345 /D_WIN32_WINNT=0x0600 /DWIN32_LEAN_AND_MEAN /DGTEST_HAS_TR1_TUPLE=0 /FIinline_c.h /D__SSE4_1__")
2016-07-29 01:19:01 +00:00
# set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /Dinline=__inline")
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /STACK:10485760")
2014-03-03 22:07:58 +00:00
if(STATIC)
foreach(VAR CMAKE_C_FLAGS_DEBUG CMAKE_CXX_FLAGS_DEBUG CMAKE_C_FLAGS_RELEASE CMAKE_CXX_FLAGS_RELEASE)
string(REPLACE "/MD" "/MT" ${VAR} "${${VAR}}")
endforeach()
endif()
include_directories(SYSTEM src/platform/msc)
else()
2016-09-18 02:23:15 +00:00
include(TestCXXAcceptsFlag)
2016-08-28 05:37:34 +00:00
message(STATUS "Building on ${CMAKE_SYSTEM_PROCESSOR} for ${ARCH}")
if(ARCH STREQUAL "default")
2014-03-03 22:07:58 +00:00
set(ARCH_FLAG "")
2017-06-27 17:06:01 +00:00
elseif(PPC64LE)
2018-05-19 22:03:59 +00:00
set(ARCH_FLAG "-mcpu=power8")
elseif(PPC64)
set(ARCH_FLAG "-mcpu=970")
elseif(PPC)
set(ARCH_FLAG "-mcpu=7400")
2017-06-23 08:02:07 +00:00
elseif(IOS AND ARCH STREQUAL "arm64")
message(STATUS "IOS: Changing arch from arm64 to armv8")
set(ARCH_FLAG "-march=armv8")
2014-03-03 22:07:58 +00:00
else()
2016-08-28 05:42:59 +00:00
set(ARCH_FLAG "-march=${ARCH}")
2018-09-02 14:51:23 +00:00
if(ARCH STREQUAL "native")
check_c_compiler_flag(-march=native CC_SUPPORTS_MARCH_NATIVE)
if (NOT CC_SUPPORTS_MARCH_NATIVE)
check_c_compiler_flag(-mtune=native CC_SUPPORTS_MTUNE_NATIVE)
if (CC_SUPPORTS_MTUNE_NATIVE)
set(ARCH_FLAG "-mtune=${ARCH}")
else()
set(ARCH_FLAG "")
endif()
endif()
endif()
2014-03-03 22:07:58 +00:00
endif()
2018-09-29 20:16:19 +00:00
option(NO_AES "Explicitly disable AES support" ${NO_AES})
if(NO_AES)
message(STATUS "AES support explicitly disabled")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DNO_AES")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DNO_AES")
2021-12-22 07:41:46 +00:00
elseif(NOT ARM AND NOT PPC64LE AND NOT PPC64 AND NOT PPC AND NOT S390X AND NOT RISCV)
2018-09-29 20:16:19 +00:00
message(STATUS "AES support enabled")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -maes")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -maes")
elseif(PPC64LE OR PPC64 OR PPC)
message(STATUS "AES support not available on POWER")
elseif(S390X)
message(STATUS "AES support not available on s390x")
2021-12-22 07:41:46 +00:00
elseif(RISCV)
message(STATUS "AES support not available on RISC-V")
2018-09-29 20:16:19 +00:00
elseif(ARM6)
message(STATUS "AES support not available on ARMv6")
elseif(ARM7)
message(STATUS "AES support not available on ARMv7")
elseif(ARM8)
CHECK_CXX_ACCEPTS_FLAG("-march=${ARCH}+crypto" ARCH_PLUS_CRYPTO)
if(ARCH_PLUS_CRYPTO)
message(STATUS "Crypto extensions enabled for ARMv8")
set(ARCH_FLAG "-march=${ARCH}+crypto")
else()
message(STATUS "Crypto extensions unavailable on your ARMv8 device")
endif()
else()
message(STATUS "AES support disabled")
endif()
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${ARCH_FLAG}")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${ARCH_FLAG}")
2021-01-23 09:38:50 +00:00
set(WARNINGS "-Wall -Wextra -Wpointer-arith -Wundef -Wvla -Wwrite-strings -Wno-error=extra -Wno-error=deprecated-declarations -Wno-unused-parameter -Wno-error=unused-variable -Wno-error=undef -Wno-error=uninitialized")
2021-12-19 10:11:09 +00:00
if(CMAKE_C_COMPILER_ID MATCHES "Clang" OR CMAKE_CXX_COMPILER_ID MATCHES "Clang")
2016-08-28 11:28:05 +00:00
if(ARM)
2016-07-11 01:11:18 +00:00
set(WARNINGS "${WARNINGS} -Wno-error=inline-asm")
endif()
2014-03-03 22:07:58 +00:00
else()
cmake: make warning about headers not fatal
Warning issued on older boost and/or OS:
In file included from /usr/include/boost/asio/detail/socket_types.hpp:61:0,
from /usr/include/boost/asio/detail/epoll_reactor.hpp:30,
from /usr/include/boost/asio/detail/reactor.hpp:21,
from /usr/include/boost/asio/detail/impl/task_io_service.ipp:24,
from /usr/include/boost/asio/detail/task_io_service.hpp:198,
from /usr/include/boost/asio/impl/io_service.hpp:71,
from /usr/include/boost/asio/io_service.hpp:767,
from /usr/include/boost/asio/basic_io_object.hpp:19,
from /usr/include/boost/asio/basic_socket.hpp:20,
from /usr/include/boost/asio/basic_datagram_socket.hpp:20,
from /usr/include/boost/asio.hpp:21,
from /home/vagrant/slave/monero-static-alpine-3_5-x86_64/build/src/common/download.cpp:32:
/usr/include/sys/poll.h:1:2: warning: #warning redirecting incorrect #include <sys/poll.h> to <poll.h> [-Wcpp]
#warning redirecting incorrect #include <sys/poll.h> to <poll.h>
2017-09-09 02:20:44 +00:00
set(WARNINGS "${WARNINGS} -Wlogical-op -Wno-error=maybe-uninitialized -Wno-error=cpp")
2014-03-03 22:07:58 +00:00
endif()
if(MINGW)
2014-08-06 16:32:59 +00:00
set(WARNINGS "${WARNINGS} -Wno-error=unused-value -Wno-error=unused-but-set-variable")
2016-06-21 16:16:25 +00:00
set(MINGW_FLAG "${MINGW_FLAG} -DWIN32_LEAN_AND_MEAN")
2014-08-06 16:43:01 +00:00
set(Boost_THREADAPI win32)
2014-03-03 22:07:58 +00:00
include_directories(SYSTEM src/platform/mingw)
2014-11-17 23:10:52 +00:00
# mingw doesn't support LTO (multiple definition errors at link time)
set(USE_LTO_DEFAULT false)
2016-07-29 01:19:01 +00:00
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,--stack,10485760")
2016-01-02 19:39:03 +00:00
if(NOT BUILD_64)
add_definitions(-DWINVER=0x0501 -D_WIN32_WINNT=0x0501)
endif()
2014-03-03 22:07:58 +00:00
endif()
set(C_WARNINGS "-Waggregate-return -Wnested-externs -Wold-style-definition -Wstrict-prototypes")
set(CXX_WARNINGS "-Wno-reorder -Wno-missing-field-initializers")
2021-09-25 04:28:41 +00:00
try_compile(STATIC_ASSERT_RES "${CMAKE_CURRENT_BINARY_DIR}/static-assert" "${CMAKE_CURRENT_SOURCE_DIR}/cmake/test-static-assert.c" CMAKE_FLAGS -DCMAKE_C_STANDARD=11)
2014-03-03 22:07:58 +00:00
if(STATIC_ASSERT_RES)
set(STATIC_ASSERT_FLAG "")
else()
set(STATIC_ASSERT_FLAG "-Dstatic_assert=_Static_assert")
endif()
2015-01-26 21:19:53 +00:00
2021-09-15 06:28:24 +00:00
try_compile(STATIC_ASSERT_CPP_RES "${CMAKE_CURRENT_BINARY_DIR}/static-assert" "${CMAKE_CURRENT_SOURCE_DIR}/cmake/test-static-assert.cpp" CMAKE_FLAGS -DCMAKE_CXX_STANDARD=11)
2017-01-05 01:11:05 +00:00
if(STATIC_ASSERT_CPP_RES)
set(STATIC_ASSERT_CPP_FLAG "")
else()
set(STATIC_ASSERT_CPP_FLAG "-Dstatic_assert=_Static_assert")
endif()
2021-04-01 17:50:35 +00:00
monero_enable_coverage()
2016-07-05 01:36:55 +00:00
# With GCC 6.1.1 the compiled binary malfunctions due to aliasing. Until that
# is fixed in the code (Issue #847), force compiler to be conservative.
2016-07-29 01:19:01 +00:00
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fno-strict-aliasing")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fno-strict-aliasing")
2016-07-05 01:36:55 +00:00
2017-12-22 21:48:31 +00:00
# if those don't work for your compiler, single it out where appropriate
2019-07-23 06:36:59 +00:00
if(CMAKE_BUILD_TYPE STREQUAL "Release" AND NOT OPENBSD)
2017-12-22 21:48:31 +00:00
set(C_SECURITY_FLAGS "${C_SECURITY_FLAGS} -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1")
set(CXX_SECURITY_FLAGS "${CXX_SECURITY_FLAGS} -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1")
endif()
# warnings
add_c_flag_if_supported(-Wformat C_SECURITY_FLAGS)
add_cxx_flag_if_supported(-Wformat CXX_SECURITY_FLAGS)
add_c_flag_if_supported(-Wformat-security C_SECURITY_FLAGS)
add_cxx_flag_if_supported(-Wformat-security CXX_SECURITY_FLAGS)
# -fstack-protector
2019-10-24 19:35:20 +00:00
if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1)))
2018-08-21 22:40:03 +00:00
add_c_flag_if_supported(-fstack-protector C_SECURITY_FLAGS)
add_cxx_flag_if_supported(-fstack-protector CXX_SECURITY_FLAGS)
add_c_flag_if_supported(-fstack-protector-strong C_SECURITY_FLAGS)
add_cxx_flag_if_supported(-fstack-protector-strong CXX_SECURITY_FLAGS)
endif()
2017-12-22 21:48:31 +00:00
2018-07-26 13:07:04 +00:00
# New in GCC 8.2
2019-10-24 19:35:20 +00:00
if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1)))
2018-07-26 13:07:04 +00:00
add_c_flag_if_supported(-fcf-protection=full C_SECURITY_FLAGS)
add_cxx_flag_if_supported(-fcf-protection=full CXX_SECURITY_FLAGS)
2019-10-24 19:35:20 +00:00
endif()
if (NOT WIN32 AND NOT OPENBSD)
2018-07-26 13:07:04 +00:00
add_c_flag_if_supported(-fstack-clash-protection C_SECURITY_FLAGS)
add_cxx_flag_if_supported(-fstack-clash-protection CXX_SECURITY_FLAGS)
endif()
2019-06-08 18:33:04 +00:00
# Removed in GCC 9.1 (or before ?), but still accepted, so spams the output
if (NOT (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1))
add_c_flag_if_supported(-mmitigate-rop C_SECURITY_FLAGS)
add_cxx_flag_if_supported(-mmitigate-rop CXX_SECURITY_FLAGS)
endif()
2018-08-07 13:05:52 +00:00
2017-12-22 21:48:31 +00:00
# linker
2021-01-12 16:49:47 +00:00
if (NOT SANITIZE AND NOT OSSFUZZ AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND (CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1 OR NOT STATIC))))
2020-05-15 17:18:50 +00:00
# PIE executables randomly crash at startup with ASAN
2019-10-24 19:35:20 +00:00
# Windows binaries die on startup with PIE when compiled with GCC <9.x
2021-01-12 16:49:47 +00:00
# Windows dynamically-linked binaries die on startup with PIE regardless of GCC version
2021-04-27 03:50:16 +00:00
if ("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang")
# Clang does not support -pie flag
add_linker_flag_if_supported("-Wl,-pie" LD_SECURITY_FLAGS)
else()
add_linker_flag_if_supported("-pie" LD_SECURITY_FLAGS)
endif()
2017-12-22 21:48:31 +00:00
endif()
add_linker_flag_if_supported(-Wl,-z,relro LD_SECURITY_FLAGS)
add_linker_flag_if_supported(-Wl,-z,now LD_SECURITY_FLAGS)
add_linker_flag_if_supported(-Wl,-z,noexecstack noexecstack_SUPPORTED)
if (noexecstack_SUPPORTED)
set(LD_SECURITY_FLAGS "${LD_SECURITY_FLAGS} -Wl,-z,noexecstack")
endif()
add_linker_flag_if_supported(-Wl,-z,noexecheap noexecheap_SUPPORTED)
if (noexecheap_SUPPORTED)
set(LD_SECURITY_FLAGS "${LD_SECURITY_FLAGS} -Wl,-z,noexecheap")
endif()
2018-10-13 15:07:56 +00:00
if(BACKCOMPAT)
add_linker_flag_if_supported(-Wl,--wrap=__divmoddi4 LD_BACKCOMPAT_FLAGS)
add_linker_flag_if_supported(-Wl,--wrap=glob LD_BACKCOMPAT_FLAGS)
message(STATUS "Using Lib C back compat flags: ${LD_BACKCOMPAT_FLAGS}")
endif()
2017-12-22 21:48:31 +00:00
# some windows linker bits
if (WIN32)
add_linker_flag_if_supported(-Wl,--dynamicbase LD_SECURITY_FLAGS)
add_linker_flag_if_supported(-Wl,--nxcompat LD_SECURITY_FLAGS)
2019-10-24 19:40:11 +00:00
add_linker_flag_if_supported(-Wl,--high-entropy-va LD_SECURITY_FLAGS)
2017-12-22 21:48:31 +00:00
endif()
2021-03-08 21:19:16 +00:00
# Warnings, that when ignored are so severe, that they can segfault or even UB any application.
# Treat them as errors.
add_c_flag_if_supported( -Werror=switch C_SECURITY_FLAGS)
add_cxx_flag_if_supported(-Werror=switch CXX_SECURITY_FLAGS)
add_c_flag_if_supported( -Werror=return-type C_SECURITY_FLAGS)
add_cxx_flag_if_supported(-Werror=return-type CXX_SECURITY_FLAGS)
2017-12-22 21:48:31 +00:00
message(STATUS "Using C security hardening flags: ${C_SECURITY_FLAGS}")
message(STATUS "Using C++ security hardening flags: ${CXX_SECURITY_FLAGS}")
message(STATUS "Using linker security hardening flags: ${LD_SECURITY_FLAGS}")
2021-09-15 06:28:24 +00:00
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D_GNU_SOURCE ${MINGW_FLAG} ${STATIC_ASSERT_FLAG} ${WARNINGS} ${C_WARNINGS} ${PIC_FLAG} ${C_SECURITY_FLAGS}")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D_GNU_SOURCE ${MINGW_FLAG} ${STATIC_ASSERT_CPP_FLAG} ${WARNINGS} ${CXX_WARNINGS} ${PIC_FLAG} ${CXX_SECURITY_FLAGS}")
2018-10-13 15:07:56 +00:00
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${LD_SECURITY_FLAGS} ${LD_BACKCOMPAT_FLAGS}")
2016-09-18 02:23:15 +00:00
# With GCC 6.1.1 the compiled binary malfunctions due to aliasing. Until that
# is fixed in the code (Issue #847), force compiler to be conservative.
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fno-strict-aliasing")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fno-strict-aliasing")
2016-08-29 10:13:55 +00:00
if(ARM)
message(STATUS "Setting FPU Flags for ARM Processors")
#NB NEON hardware does not fully implement the IEEE 754 standard for floating-point arithmetic
#Need custom assembly code to take full advantage of NEON SIMD
#Cortex-A5/9 -mfpu=neon-fp16
#Cortex-A7/15 -mfpu=neon-vfpv4
#Cortex-A8 -mfpu=neon
2016-09-18 02:23:15 +00:00
#ARMv8 -FP and SIMD on by default for all ARM8v-A series, NO -mfpu setting needed
2016-08-29 10:13:55 +00:00
#For custom -mtune, processor IDs for ARMv8-A series:
#0xd04 - Cortex-A35
#0xd07 - Cortex-A57
#0xd08 - Cortex-A72
#0xd03 - Cortex-A73
if(NOT ARM8)
CHECK_CXX_ACCEPTS_FLAG(-mfpu=vfp3-d16 CXX_ACCEPTS_VFP3_D16)
CHECK_CXX_ACCEPTS_FLAG(-mfpu=vfp4 CXX_ACCEPTS_VFP4)
CHECK_CXX_ACCEPTS_FLAG(-mfloat-abi=hard CXX_ACCEPTS_MFLOAT_HARD)
CHECK_CXX_ACCEPTS_FLAG(-mfloat-abi=softfp CXX_ACCEPTS_MFLOAT_SOFTFP)
endif()
2015-04-06 12:00:09 +00:00
2016-08-29 10:13:55 +00:00
if(ARM8)
CHECK_CXX_ACCEPTS_FLAG(-mfix-cortex-a53-835769 CXX_ACCEPTS_MFIX_CORTEX_A53_835769)
CHECK_CXX_ACCEPTS_FLAG(-mfix-cortex-a53-843419 CXX_ACCEPTS_MFIX_CORTEX_A53_843419)
endif()
if(ARM6)
message(STATUS "Selecting VFP for ARMv6")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mfpu=vfp")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mfpu=vfp")
2018-03-19 23:33:49 +00:00
if(DEPENDS)
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -marm")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -marm")
endif()
2016-08-29 10:13:55 +00:00
endif(ARM6)
if(ARM7)
if(CXX_ACCEPTS_VFP3_D16 AND NOT CXX_ACCEPTS_VFP4)
message(STATUS "Selecting VFP3 for ARMv7")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mfpu=vfp3-d16")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mfpu=vfp3-d16")
endif()
if(CXX_ACCEPTS_VFP4)
message(STATUS "Selecting VFP4 for ARMv7")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mfpu=vfp4")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mfpu=vfp4")
endif()
if(CXX_ACCEPTS_MFLOAT_HARD)
message(STATUS "Setting Hardware ABI for Floating Point")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mfloat-abi=hard")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mfloat-abi=hard")
endif()
if(CXX_ACCEPTS_MFLOAT_SOFTFP AND NOT CXX_ACCEPTS_MFLOAT_HARD)
message(STATUS "Setting Software ABI for Floating Point")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mfloat-abi=softfp")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mfloat-abi=softfp")
endif()
endif(ARM7)
if(ARM8)
if(CXX_ACCEPTS_MFIX_CORTEX_A53_835769)
message(STATUS "Enabling Cortex-A53 workaround 835769")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mfix-cortex-a53-835769")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mfix-cortex-a53-835769")
endif()
if(CXX_ACCEPTS_MFIX_CORTEX_A53_843419)
message(STATUS "Enabling Cortex-A53 workaround 843419")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mfix-cortex-a53-843419")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mfix-cortex-a53-843419")
endif()
endif(ARM8)
endif(ARM)
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
2020-05-15 17:18:50 +00:00
# random crash on startup when asan is on if pie is enabled
if(NOT SANITIZE AND ANDROID AND NOT BUILD_GUI_DEPS STREQUAL "ON" OR IOS)
2017-01-05 01:11:05 +00:00
#From Android 5: "only position independent executables (PIE) are supported"
2017-04-02 10:19:25 +00:00
message(STATUS "Enabling PIE executable")
2017-12-22 21:48:31 +00:00
set(PIC_FLAG "")
2017-01-05 01:11:05 +00:00
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fPIE")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fPIE")
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_CXX_FLAGS} -fPIE -pie")
endif()
2014-04-30 20:50:06 +00:00
if(APPLE)
2018-09-29 20:14:28 +00:00
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fvisibility=default -DGTEST_HAS_TR1_TUPLE=0")
2014-04-30 20:50:06 +00:00
endif()
2016-08-29 18:23:57 +00:00
set(DEBUG_FLAGS "-g3")
2014-08-06 16:52:25 +00:00
2018-11-12 22:35:21 +00:00
# At least some CLANGs default to not enough for monero
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ftemplate-depth=900")
2014-08-07 23:34:10 +00:00
if(NOT DEFINED USE_LTO_DEFAULT)
2017-03-20 12:24:30 +00:00
set(USE_LTO_DEFAULT false)
2014-08-07 23:34:10 +00:00
endif()
set(USE_LTO ${USE_LTO_DEFAULT} CACHE BOOL "Use Link-Time Optimization (Release mode only)")
2014-09-15 20:47:26 +00:00
2021-04-25 23:27:02 +00:00
if(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
2015-05-26 09:07:58 +00:00
# There is a clang bug that does not allow to compile code that uses AES-NI intrinsics if -flto is enabled, so explicitly disable
2014-10-21 18:24:49 +00:00
set(USE_LTO false)
2014-09-15 20:47:26 +00:00
endif()
2015-05-26 09:07:58 +00:00
2014-08-06 16:52:25 +00:00
if(USE_LTO)
2014-05-22 11:00:48 +00:00
set(RELEASE_FLAGS "${RELEASE_FLAGS} -flto")
2014-08-06 16:52:25 +00:00
if(STATIC)
set(RELEASE_FLAGS "${RELEASE_FLAGS} -ffat-lto-objects")
endif()
# Since gcc 4.9 the LTO format is non-standard (slim), so we need the gcc-specific ar and ranlib binaries
2016-12-15 10:27:53 +00:00
if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU" AND NOT (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.9.0) AND NOT OPENBSD AND NOT DRAGONFLY)
2016-09-17 03:59:46 +00:00
# When invoking cmake on distributions on which gcc's binaries are prefixed
# with an arch-specific triplet, the user must specify -DCHOST=<prefix>
2016-09-01 02:21:22 +00:00
if (DEFINED CHOST)
2016-09-17 03:59:46 +00:00
set(CMAKE_AR "${CHOST}-gcc-ar")
set(CMAKE_RANLIB "${CHOST}-gcc-ranlib")
2016-09-10 20:56:40 +00:00
else()
set(CMAKE_AR "gcc-ar")
set(CMAKE_RANLIB "gcc-ranlib")
2016-09-01 02:21:22 +00:00
endif()
2014-08-06 16:52:25 +00:00
endif()
2014-05-22 11:00:48 +00:00
endif()
2014-08-06 16:52:25 +00:00
2014-03-03 22:07:58 +00:00
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} ${DEBUG_FLAGS}")
set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} ${DEBUG_FLAGS}")
set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} ${RELEASE_FLAGS}")
set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} ${RELEASE_FLAGS}")
2016-07-26 01:06:12 +00:00
2016-08-27 22:47:07 +00:00
if(STATIC)
# STATIC already configures most deps to be linked in statically,
# here we make more deps static if the platform permits it
if (MINGW)
# On Windows, this is as close to fully-static as we get:
# this leaves only deps on /c/Windows/system32/*.dll
set(STATIC_FLAGS "-static")
2016-12-15 10:27:53 +00:00
elseif (NOT (APPLE OR FREEBSD OR OPENBSD OR DRAGONFLY))
2016-08-27 22:47:07 +00:00
# On Linux, we don't support fully static build, but these can be static
set(STATIC_FLAGS "-static-libgcc -static-libstdc++")
endif()
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${STATIC_FLAGS} ")
2016-07-26 02:30:59 +00:00
endif()
2014-03-03 22:07:58 +00:00
endif()
2015-01-05 19:30:17 +00:00
if (${BOOST_IGNORE_SYSTEM_PATHS} STREQUAL "ON")
2014-10-21 18:24:49 +00:00
set(Boost_NO_SYSTEM_PATHS TRUE)
2014-09-22 10:30:53 +00:00
endif()
2015-03-22 09:26:30 +00:00
set(OLD_LIB_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
2019-05-30 12:11:58 +00:00
set(Boost_NO_BOOST_CMAKE ON)
2014-03-03 22:07:58 +00:00
if(STATIC)
2015-03-22 09:26:30 +00:00
if(MINGW)
set(CMAKE_FIND_LIBRARY_SUFFIXES .a)
endif()
2014-03-03 22:07:58 +00:00
set(Boost_USE_STATIC_LIBS ON)
set(Boost_USE_STATIC_RUNTIME ON)
endif()
2018-02-22 18:52:55 +00:00
find_package(Boost 1.58 QUIET REQUIRED COMPONENTS system filesystem thread date_time chrono regex serialization program_options locale)
2021-06-28 19:13:02 +00:00
add_definitions(-DBOOST_ASIO_ENABLE_SEQUENTIAL_STRAND_ALLOCATION)
2014-09-29 18:13:15 +00:00
2015-03-22 09:26:30 +00:00
set(CMAKE_FIND_LIBRARY_SUFFIXES ${OLD_LIB_SUFFIXES})
2014-09-29 18:13:15 +00:00
if(NOT Boost_FOUND)
2019-03-21 11:00:23 +00:00
die("Could not find Boost libraries, please make sure you have installed Boost or libboost-all-dev (>=1.58) or the equivalent")
2016-10-27 20:38:29 +00:00
elseif(Boost_FOUND)
message(STATUS "Found Boost Version: ${Boost_VERSION}")
2019-03-21 11:00:23 +00:00
if (Boost_VERSION VERSION_LESS 10 AND Boost_VERSION VERSION_LESS 1.62.0 AND NOT (OPENSSL_VERSION VERSION_LESS 1.1))
set(BOOST_BEFORE_1_62 true)
endif()
if (NOT Boost_VERSION VERSION_LESS 10 AND Boost_VERSION VERSION_LESS 106200 AND NOT (OPENSSL_VERSION VERSION_LESS 1.1))
set(BOOST_BEFORE_1_62 true)
endif()
if (BOOST_BEFORE_1_62)
2019-05-04 20:25:22 +00:00
message(FATAL_ERROR "Boost ${Boost_VERSION} (older than 1.62) is too old to link with OpenSSL ${OPENSSL_VERSION} (1.1 or newer) found at ${OPENSSL_INCLUDE_DIR} and ${OPENSSL_LIBRARIES}. "
2017-10-16 02:41:32 +00:00
"Update Boost or install OpenSSL 1.0 and set path to it when running cmake: "
2019-05-04 20:25:22 +00:00
"cmake -DOPENSSL_ROOT_DIR='/usr/include/openssl-1.0'")
2017-10-16 02:41:32 +00:00
endif()
2014-03-03 22:07:58 +00:00
endif()
2014-09-29 18:13:15 +00:00
2014-03-03 22:07:58 +00:00
include_directories(SYSTEM ${Boost_INCLUDE_DIRS})
if(MINGW)
2018-05-31 09:40:00 +00:00
set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -Wa,-mbig-obj")
2018-10-12 15:20:42 +00:00
set(EXTRA_LIBRARIES mswsock;ws2_32;iphlpapi;crypt32;bcrypt)
2018-03-19 23:33:49 +00:00
if(DEPENDS)
2019-01-29 15:18:47 +00:00
set(ICU_LIBRARIES icuio icui18n icuuc icudata icutu iconv)
2018-03-19 23:33:49 +00:00
else()
2018-11-14 15:18:31 +00:00
set(ICU_LIBRARIES icuio icuin icuuc icudt icutu iconv)
2018-03-19 23:33:49 +00:00
endif()
2017-02-08 22:50:14 +00:00
elseif(APPLE OR OPENBSD OR ANDROID)
2014-10-06 20:29:07 +00:00
set(EXTRA_LIBRARIES "")
2017-02-08 22:50:14 +00:00
elseif(FREEBSD)
set(EXTRA_LIBRARIES execinfo)
2016-12-15 10:27:53 +00:00
elseif(DRAGONFLY)
find_library(COMPAT compat)
2017-02-08 22:50:14 +00:00
set(EXTRA_LIBRARIES execinfo ${COMPAT})
2017-10-10 13:05:28 +00:00
elseif(CMAKE_SYSTEM_NAME MATCHES "(SunOS|Solaris)")
set(EXTRA_LIBRARIES socket nsl resolv)
2018-09-18 15:07:54 +00:00
elseif(NOT MSVC AND NOT DEPENDS)
2014-10-06 20:29:07 +00:00
find_library(RT rt)
2016-02-12 21:25:39 +00:00
set(EXTRA_LIBRARIES ${RT})
2014-03-03 22:07:58 +00:00
endif()
2016-07-10 22:57:53 +00:00
list(APPEND EXTRA_LIBRARIES ${CMAKE_DL_LIBS})
2016-03-28 18:00:18 +00:00
2018-11-04 23:38:58 +00:00
if (HIDAPI_FOUND OR LibUSB_COMPILE_TEST_PASSED)
2018-08-01 07:24:53 +00:00
if (APPLE)
2018-09-29 20:14:56 +00:00
if(DEPENDS)
2020-12-04 16:48:41 +00:00
list(APPEND EXTRA_LIBRARIES "-framework Foundation -framework AppKit -framework IOKit")
2018-09-29 20:14:56 +00:00
else()
find_library(COREFOUNDATION CoreFoundation)
2020-12-04 16:48:41 +00:00
find_library(APPKIT AppKit)
2018-09-29 20:14:56 +00:00
find_library(IOKIT IOKit)
2020-12-04 16:48:41 +00:00
list(APPEND EXTRA_LIBRARIES ${APPKIT})
2018-09-29 20:14:56 +00:00
list(APPEND EXTRA_LIBRARIES ${IOKIT})
list(APPEND EXTRA_LIBRARIES ${COREFOUNDATION})
endif()
2018-08-01 07:24:53 +00:00
endif()
if (WIN32)
list(APPEND EXTRA_LIBRARIES setupapi)
endif()
endif()
2017-05-29 22:39:49 +00:00
option(USE_READLINE "Build with GNU readline support." ON)
2019-09-07 20:02:11 +00:00
if(USE_READLINE AND NOT DEPENDS)
2017-05-29 22:39:49 +00:00
find_package(Readline)
if(READLINE_FOUND AND GNU_READLINE_FOUND)
add_definitions(-DHAVE_READLINE)
include_directories(${Readline_INCLUDE_DIR})
message(STATUS "Found readline library at: ${Readline_ROOT_DIR}")
2017-10-29 14:51:51 +00:00
set(EPEE_READLINE epee_readline)
2017-05-29 22:39:49 +00:00
else()
message(STATUS "Could not find GNU readline library so building without readline support")
endif()
2019-09-07 20:02:11 +00:00
elseif(USE_READLINE AND DEPENDS AND NOT MINGW)
find_path(Readline_INCLUDE_PATH readline/readline.h)
find_library(Readline_LIBRARY readline)
find_library(Terminfo_LIBRARY tinfo)
set(Readline_LIBRARY "${Readline_LIBRARY};${Terminfo_LIBRARY}")
set(GNU_READLINE_LIBRARY ${Readline_LIBRARY})
add_definitions(-DHAVE_READLINE)
set(EPEE_READLINE epee_readline)
2017-05-29 22:39:49 +00:00
endif()
2017-01-21 04:15:00 +00:00
if(ANDROID)
set(ATOMIC libatomic.a)
2018-08-21 23:25:14 +00:00
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-error=user-defined-warnings")
2017-01-21 04:15:00 +00:00
endif()
2021-04-25 23:27:02 +00:00
if(CMAKE_C_COMPILER_ID MATCHES "Clang" AND ARCH_WIDTH EQUAL "32" AND NOT IOS AND NOT FREEBSD)
2016-07-29 03:26:51 +00:00
find_library(ATOMIC atomic)
2018-10-20 21:36:51 +00:00
if (ATOMIC_FOUND)
list(APPEND EXTRA_LIBRARIES ${ATOMIC})
endif()
2016-03-28 18:00:18 +00:00
endif()
2019-08-18 17:49:02 +00:00
find_path(ZMQ_INCLUDE_PATH zmq.h)
2017-09-05 16:20:27 +00:00
find_library(ZMQ_LIB zmq)
2017-10-20 20:33:07 +00:00
find_library(PGM_LIBRARY pgm)
find_library(NORM_LIBRARY norm)
2020-09-17 14:51:33 +00:00
find_library(GSSAPI_LIBRARY gssapi_krb5)
2019-09-11 05:04:55 +00:00
find_library(PROTOLIB_LIBRARY protolib)
2017-09-19 23:47:24 +00:00
find_library(SODIUM_LIBRARY sodium)
2017-09-05 16:20:27 +00:00
2017-09-05 16:20:40 +00:00
if(NOT ZMQ_INCLUDE_PATH)
2019-08-18 17:49:02 +00:00
message(FATAL_ERROR "Could not find required header zmq.h")
2017-09-05 16:20:40 +00:00
endif()
if(NOT ZMQ_LIB)
2017-09-19 23:47:24 +00:00
message(FATAL_ERROR "Could not find required libzmq")
endif()
2017-10-20 20:33:07 +00:00
if(PGM_LIBRARY)
set(ZMQ_LIB "${ZMQ_LIB};${PGM_LIBRARY}")
endif()
if(NORM_LIBRARY)
set(ZMQ_LIB "${ZMQ_LIB};${NORM_LIBRARY}")
endif()
2020-09-17 14:51:33 +00:00
if(GSSAPI_LIBRARY)
set(ZMQ_LIB "${ZMQ_LIB};${GSSAPI_LIBRARY}")
endif()
2019-09-11 05:04:55 +00:00
if(PROTOLIB_LIBRARY)
set(ZMQ_LIB "${ZMQ_LIB};${PROTOLIB_LIBRARY}")
endif()
2017-09-19 23:47:24 +00:00
if(SODIUM_LIBRARY)
set(ZMQ_LIB "${ZMQ_LIB};${SODIUM_LIBRARY}")
2017-09-05 16:20:40 +00:00
endif()
2019-11-15 14:08:28 +00:00
include(external/supercop/functions.cmake) # place after setting flags and before src directory inclusion
2017-10-09 00:45:45 +00:00
add_subdirectory(contrib)
add_subdirectory(src)
2016-05-27 07:42:31 +00:00
2019-06-20 16:53:44 +00:00
find_package(PythonInterp)
2014-12-01 18:00:22 +00:00
if(BUILD_TESTS)
2019-04-16 12:46:01 +00:00
message(STATUS "Building tests")
2014-12-01 18:00:22 +00:00
add_subdirectory(tests)
2019-04-16 12:46:01 +00:00
else()
message(STATUS "Not building tests")
endif()
if(BUILD_DEBUG_UTILITIES)
message(STATUS "Building debug utilities")
else()
message(STATUS "Not building debug utilities")
2015-01-02 16:52:46 +00:00
endif()
2015-04-01 17:00:45 +00:00
if(BUILD_DOCUMENTATION)
set(DOC_GRAPHS "YES" CACHE STRING "Create dependency graphs (needs graphviz)")
set(DOC_FULLGRAPHS "NO" CACHE STRING "Create call/callee graphs (large)")
find_program(DOT_PATH dot)
if (DOT_PATH STREQUAL "DOT_PATH-NOTFOUND")
message("Doxygen: graphviz not found - graphs disabled")
set(DOC_GRAPHS "NO")
endif()
find_package(Doxygen)
if(DOXYGEN_FOUND)
configure_file("cmake/Doxyfile.in" "Doxyfile" @ONLY)
configure_file("cmake/Doxygen.extra.css.in" "Doxygen.extra.css" @ONLY)
add_custom_target(doc
${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile
WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
COMMENT "Generating API documentation with Doxygen.." VERBATIM)
endif()
endif()
2016-09-03 12:11:26 +00:00
# when ON - will install libwallet_merged into "lib"
2016-09-03 10:32:06 +00:00
option(BUILD_GUI_DEPS "Build GUI dependencies." OFF)
2019-09-05 15:27:12 +00:00
find_package(PythonInterp)
find_program(iwyu_tool_path NAMES iwyu_tool.py iwyu_tool)
if (iwyu_tool_path AND PYTHONINTERP_FOUND)
add_custom_target(iwyu
COMMAND "${PYTHON_EXECUTABLE}" "${iwyu_tool_path}" -p "${CMAKE_BINARY_DIR}" -- --no_fwd_decls
COMMENT "Running include-what-you-use tool"
VERBATIM
)
endif()
