All uses were safe due to addresses being converted to script_pubkeys which
don't embed their network. The only risk of there being an issue is if a
future address spec did embed the net ID into the script_pubkey and that was
moved to.
This resolves the audit note and does offer that tightening.
* Partial move to ff 0.13
It turns out the newly released k256 0.12 isn't on ff 0.13, preventing further
work at this time.
* Update all crates to work on ff 0.13
The provided curves still need to be expanded to fit the new API.
* Finish adding dalek-ff-group ff 0.13 constants
* Correct FieldElement::product definition
Also stops exporting macros.
* Test most new parts of ff 0.13
* Additionally test ff-group-tests with BLS12-381 and the pasta curves
We only tested curves from RustCrypto. Now we test a curve offered by zk-crypto,
the group behind ff/group, and the pasta curves, which is by Zcash (though
Zcash developers are also behind zk-crypto).
* Finish Ed448
Fully specifies all constants, passes all tests in ff-group-tests, and finishes moving to ff-0.13.
* Add RustCrypto/elliptic-curves to allowed git repos
Needed due to k256/p256 incorrectly defining product.
* Finish writing ff 0.13 tests
* Add additional comments to dalek
* Further comments
* Update ethereum-serai to ff 0.13
Moves the processor to it. This ends up as a net-neutral LoC change to the
processor, unfortunately, yet this makes bitcoin-serai safer/easier to use, and
increases the processor's usage of bitcoin-serai.
Also re-organizes bitcoin-serai a bit.
* Initial work on a message box
* Finish message-box (untested)
* Expand documentation
* Embed the recipient in the signature challenge
Prevents a message from A -> B from being read as from A -> C.
* Update documentation by bifurcating sender/receiver
* Panic on receiving an invalid signature
If we've received an invalid signature in an authenticated system, a
service is malicious, critically faulty (equivalent to malicious), or
the message layer has been compromised (or is otherwise critically
faulty).
Please note a receiver who handles a message they shouldn't will trigger
this. That falls under being critically faulty.
* Documentation and helper methods
SecureMessage::new and SecureMessage::serialize.
Secure Debug for MessageBox.
* Have SecureMessage not be serialized by default
Allows passing around in-memory, if desired, and moves the error from
decrypt to new (which performs deserialization).
Decrypt no longer has an error since it panics if given an invalid
signature, due to this being intranet code.
* Explain and improve nonce handling
Includes a missing zeroize call.
* Rebase to latest develop
Updates to transcript 0.2.0.
* Add a test for the MessageBox
* Export PrivateKey and PublicKey
* Also test serialization
* Add a key_gen binary to message_box
* Have SecureMessage support Serde
* Add encrypt_to_bytes and decrypt_from_bytes
* Support String ser via base64
* Rename encrypt/decrypt to encrypt_bytes/decrypt_to_bytes
* Directly operate with values supporting Borsh
* Use bincode instead of Borsh
By staying inside of serde, we'll support many more structs. While
bincode isn't canonical, we don't need canonicity on an authenticated,
internal system.
* Turn PrivateKey, PublicKey into structs
Uses Zeroizing for the PrivateKey per #150.
* from_string functions intended for loading from an env
* Use &str for PublicKey from_string (now from_str)
The PrivateKey takes the String to take ownership of its memory and
zeroize it. That isn't needed with PublicKeys.
* Finish updating from develop
* Resolve warning
* Use ZeroizingAlloc on the key_gen binary
* Move message-box from crypto/ to common/
* Move key serialization functions to ser
* add/remove functions in MessageBox
* Implement Hash on dalek_ff_group Points
* Make MessageBox generic to its key
Exposes a &'static str variant for internal use and a RistrettoPoint
variant for external use.
* Add Private to_string as deprecated
Stub before more competent tooling is deployed.
* Private to_public
* Test both Internal and External MessageBox, only use PublicKey in the pub API
* Remove panics on invalid signatures
Leftover from when this was solely internal which is now unsafe.
* Chicken scratch a Scanner task
* Add a write function to the DKG library
Enables writing directly to a file.
Also modifies serialize to return Zeroizing<Vec<u8>> instead of just Vec<u8>.
* Make dkg::encryption pub
* Remove encryption from MessageBox
* Use a 64-bit block number in Substrate
We use a 64-bit block number in general since u32 only works for 120 years
(with a 1 second block time). As some chains even push the 1 second threshold,
especially ones based on DAG consensus, this becomes potentially as low as 60
years.
While that should still be plenty, it's not worth wondering/debating. Since
Serai uses 64-bit block numbers elsewhere, this ensures consistency.
* Misc crypto lints
* Get the scanner scratch to compile
* Initial scanner test
* First few lines of scheduler
* Further work on scheduler, solidify API
* Define Scheduler TX format
* Branch creation algorithm
* Document when the branch algorithm isn't perfect
* Only scanned confirmed blocks
* Document Coin
* Remove Canonical/ChainNumber from processor
The processor should be abstracted from canonical numbers thanks to the
coordinator, making this unnecessary.
* Add README documenting processor flow
* Use Zeroize on substrate primitives
* Define messages from/to the processor
* Correct over-specified versioning
* Correct build re: in_instructions::primitives
* Debug/some serde in crypto/
* Use a struct for ValidatorSetInstance
* Add a processor key_gen task
Redos DB handling code.
* Replace trait + impl with wrapper struct
* Add a key confirmation flow to the key gen task
* Document concerns on key_gen
* Start on a signer task
* Add Send to FROST traits
* Move processor lib.rs to main.rs
Adds a dummy main to reduce clippy dead_code warnings.
* Further flesh out main.rs
* Move the DB trait to AsRef<[u8]>
* Signer task
* Remove a panic in bitcoin when there's insufficient funds
Unchecked underflow.
* Have Monero's mine_block mine one block, not 10
It was initially a nicety to deal with the 10 block lock. C::CONFIRMATIONS
should be used for that instead.
* Test signer
* Replace channel expects with log statements
The expects weren't problematic and had nicer code. They just clutter test
output.
* Remove the old wallet file
It predates the coordinator design and shouldn't be used.
* Rename tests/scan.rs to tests/scanner.rs
* Add a wallet test
Complements the recently removed wallet file by adding a test for the scanner,
scheduler, and signer together.
* Work on a run function
Triggers a clippy ICE.
* Resolve clippy ICE
The issue was the non-fully specified lambda in signer.
* Add KeyGenEvent and KeyGenOrder
Needed so we get KeyConfirmed messages from the key gen task.
While we could've read the CoordinatorMessage to see that, routing through the
key gen tasks ensures we only handle it once it's been successfully saved to
disk.
* Expand scanner test
* Clarify processor documentation
* Have the Scanner load keys on boot/save outputs to disk
* Use Vec<u8> for Block ID
Much more flexible.
* Panic if we see the same output multiple times
* Have the Scanner DB mark itself as corrupt when doing a multi-put
This REALLY should be a TX. Since we don't have a TX API right now, this at
least offers detection.
* Have DST'd DB keys accept AsRef<[u8]>
* Restore polling all signers
Writes a custom future to do so.
Also loads signers on boot using what the scanner claims are active keys.
* Schedule OutInstructions
Adds a data field to Payment.
Also cleans some dead code.
* Panic if we create an invalid transaction
Saves the TX once it's successfully signed so if we do panic, we have a copy.
* Route coordinator messages to their respective signer
Requires adding key to the SignId.
* Send SignTransaction orders for all plans
* Add a timer to retry sign_plans when prepare_send fails
* Minor fmt'ing
* Basic Fee API
* Move the change key into Plan
* Properly route activation_number
* Remove ScannerEvent::Block
It's not used under current designs
* Nicen logs
* Add utilities to get a block's number
* Have main issue AckBlock
Also has a few misc lints.
* Parse instructions out of outputs
* Tweak TODOs and remove an unwrap
* Update Bitcoin max input/output quantity
* Only read one piece of data from Monero
Due to output randomization, it's infeasible.
* Embed plan IDs into the TXs they create
We need to stop attempting signing if we've already signed a protocol. Ideally,
any one of the participating signers should be able to provide a proof the TX
was successfully signed. We can't just run a second signing protocol though as
a single malicious signer could complete the TX signature, and publish it,
yet not complete the secondary signature.
The TX itself has to be sufficient to show that the TX matches the plan. This
is done by embedding the ID, so matching addresses/amounts plans are
distinguished, and by allowing verification a TX actually matches a set of
addresses/amounts.
For Monero, this will need augmenting with the ephemeral keys (or usage of a
static seed for them).
* Don't use OP_RETURN to encode the plan ID on Bitcoin
We can use the inputs to distinguih identical-output plans without issue.
* Update OP_RETURN data access
It's not required to be the last output.
* Add Eventualities to Monero
An Eventuality is an effective equivalent to a SignableTransaction. That is
declared not by the inputs it spends, yet the outputs it creates.
Eventualities are also bound to a 32-byte RNG seed, enabling usage of a
hash-based identifier in a SignableTransaction, allowing multiple
SignableTransactions with the same output set to have different Eventualities.
In order to prevent triggering the burning bug, the RNG seed is hashed with
the planned-to-be-used inputs' output keys. While this does bind to them, it's
only loosely bound. The TX actually created may use different inputs entirely
if a forgery is crafted (which requires no brute forcing).
Binding to the key images would provide a strong binding, yet would require
knowing the key images, which requires active communication with the spend
key.
The purpose of this is so a multisig can identify if a Transaction the entire
group planned has been executed by a subset of the group or not. Once a plan
is created, it can have an Eventuality made. The Eventuality's extra is able
to be inserted into a HashMap, so all new on-chain transactions can be
trivially checked as potential candidates. Once a potential candidate is found,
a check involving ECC ops can be performed.
While this is arguably a DoS vector, the underlying Monero blockchain would
need to be spammed with transactions to trigger it. Accordingly, it becomes
a Monero blockchain DoS vector, when this code is written on the premise
of the Monero blockchain functioning. Accordingly, it is considered handled.
If a forgery does match, it must have created the exact same outputs the
multisig would've. Accordingly, it's argued the multisig shouldn't mind.
This entire suite of code is only necessary due to the lack of outgoing
view keys, yet it's able to avoid an interactive protocol to communicate
key images on every single received output.
While this could be locked to the multisig feature, there's no practical
benefit to doing so.
* Add support for encoding Monero address to instructions
* Move Serai's Monero address encoding into serai-client
serai-client is meant to be a single library enabling using Serai. While it was
originally written as an RPC client for Serai, apps actually using Serai will
primarily be sending transactions on connected networks. Sending those
transactions require proper {In, Out}Instructions, including proper address
encoding.
Not only has address encoding been moved, yet the subxt client is now behind
a feature. coin integrations have their own features, which are on by default.
primitives are always exposed.
* Reorganize file layout a bit, add feature flags to processor
* Tidy up ETH Dockerfile
* Add Bitcoin address encoding
* Move Bitcoin::Address to serai-client's
* Comment where tweaking needs to happen
* Add an API to check if a plan was completed in a specific TX
This allows any participating signer to submit the TX ID to prevent further
signing attempts.
Also performs some API cleanup.
* Minimize FROST dependencies
* Use a seeded RNG for key gen
* Tweak keys from Key gen
* Test proper usage of Branch/Change addresses
Adds a more descriptive error to an error case in decoys, and pads Monero
payments as needed.
* Also test spending the change output
* Add queued_plans to the Scheduler
queued_plans is for payments to be issued when an amount appears, yet the
amount is currently pre-fee. One the output is actually created, the
Scheduler should be notified of the amount it was created with, moving from
queued_plans to plans under the actual amount.
Also tightens debug_asserts to asserts for invariants which may are at risk of
being exclusive to prod.
* Add missing tweak_keys call
* Correct decoy selection height handling
* Add a few log statements to the scheduler
* Simplify test's get_block_number
* Simplify, while making more robust, branch address handling in Scheduler
* Have fees deducted from payments
Corrects Monero's handling of fees when there's no change address.
Adds a DUST variable, as needed due to 1_00_000_000 not being enough to pay
its fee on Monero.
* Add comment to Monero
* Consolidate BTC/XMR prepare_send code
These aren't fully consolidated. We'd need a SignableTransaction trait for
that. This is a lot cleaner though.
* Ban integrated addresses
The reasoning why is accordingly documented.
* Tidy TODOs/dust handling
* Update README TODO
* Use a determinisitic protocol version in Monero
* Test rebuilt KeyGen machines function as expected
* Use a more robust KeyGen entropy system
* Add DB TXNs
Also load entropy from env
* Add a loop for processing messages from substrate
Allows detecting if we're behind, and if so, waiting to handle the message
* Set Monero MAX_INPUTS properly
The previous number was based on an old hard fork. With the ring size having
increased, transactions have since got larger.
* Distinguish TODOs into TODO and TODO2s
TODO2s are for after protonet
* Zeroize secret share repr in ThresholdCore write
* Work on Eventualities
Adds serialization and stops signing when an eventuality is proven.
* Use a more robust DB key schema
* Update to {k, p}256 0.12
* cargo +nightly clippy
* cargo update
* Slight message-box tweaks
* Update to recent Monero merge
* Add a Coordinator trait for communication with coordinator
* Remove KeyGenHandle for just KeyGen
While KeyGen previously accepted instructions over a channel, this breaks the
ack flow needed for coordinator communication. Now, KeyGen is the direct object
with a handle() function for messages.
Thankfully, this ended up being rather trivial for KeyGen as it has no
background tasks.
* Add a handle function to Signer
Enables determining when it's finished handling a CoordinatorMessage and
therefore creating an acknowledgement.
* Save transactions used to complete eventualities
* Use a more intelligent sleep in the signer
* Emit SignedTransaction with the first ID *we can still get from our node*
* Move Substrate message handling into the new coordinator recv loop
* Add handle function to Scanner
* Remove the plans timer
Enables ensuring the ordring on the handling of plans.
* Remove the outputs function which panicked if a precondition wasn't met
The new API only returns outputs upon satisfaction of the precondition.
* Convert SignerOrder::SignTransaction to a function
* Remove the key_gen object from sign_plans
* Refactor out get_fee/prepare_send into dedicated functions
* Save plans being signed to the DB
* Reload transactions being signed on boot
* Stop reloading TXs being signed (and report it to peers)
* Remove message-box from the processor branch
We don't use it here yet.
* cargo +nightly fmt
* Move back common/zalloc
* Update subxt to 0.27
* Zeroize ^1.5, not 1
* Update GitHub workflow
* Remove usage of SignId in completed
* serai Dockerfile & Makefile fixed
* added new bitcoin mod & bitcoinhram
* couple changes
* added odd&even check for bitcoin signing
* sign message updated
* print_keys commented out
* fixed signing process
* Added new bitcoin library & added most of bitcoin processor logic
* added new crate and refactored the bitcoin coin library
* added signing test function
* moved signature.rs
* publish set to false
* tests moved back to the root
* added new functions to rpc
* added utxo test
* added new rpc methods and refactored bitcoin processor
* added spendable output & fixed errors & added new logic for sighash & opened port 18443 for bitcoin docker
* changed tweak keys
* added tweak_keys & publish transaction and refactored bitcoin processor
* added new structs and fixed problems for testing purposes
* reverted dockerfile back its original
* reverted block generation of bitcoin to 5 seconds
* deleted unnecessary test function
* added new sighash & added new dbg messages & fixed couple errors
* fixed couple issue & removed unused functions
* fix for signing process
* crypto file for bitcoin refactored
* disabled test_send & removed some of the debug logs
* signing implemented & transaction weight calculation added & change address logic added
* refactored tweak_keys
* refactored mine_block & fixed change_address logic
* implemented new traits to bitcoin processor& refactored bitcoin processor
* added new line to tests file
* added new line to bitcoin's wallet.rs
* deleted Cargo.toml from coins folder
* edited bitcoin's Cargo.toml and added LICENSE
* added new line to bitcoin's Cargo.toml
* added spaces
* added spaces
* deleted unnecessary object
* added spaces
* deleted patch numbers
* updated sha256 parameter for message
* updated tag as const
* deleted unnecessary brackets and imports
* updated rpc.rs to 2 space indent
* deleted unnecessary brackers
* deleted unnecessary brackets
* changed it to explicit
* updated to explicit
* deleted unnecessary parsing
* added ? for easy return
* updated imports
* updated height to number
* deleted unnecessary brackets
* updated clsag to sig & to_vec to as_ref
* updated _sig to schnorr_signature
* deleted unnecessary variable
* updated Cargo.toml of processor and bitcoin
* updated imports of bitcoin processor
* updated MBlock to BBlock
* updated MSignable to BSignable
* updated imports
* deleted mask from Fee
* updated get_block function return
* updated comparison logic for scripts
* updated assert to debug_assert
* updated height to number
* updated txid logic
* updated tweak_keys definition
* updated imports
* deleted new line
* delete HashMap from monero
* deleted old test code parts
* updated test amount to a round number
* changed the test code part back to its original
* updated imports of rpc.rs
* deleted unnecessary return assignments
* deleted get_fee_per_byte
* deleted create_raw_transaction
* deleted fund_raw_transaction
* deleted sign transaction rpc
* delete verify_message rpc
* deleted get_balance
* deleted decode_raw_transaction rpc
* deleted list_transactions rpc
* changed test_send to p2wpkh
* updated imports of test_send
* fixed imports of test_send
* updated bitcoin's mine_block function
* updated bitcoin's test_send
* updated bitcoin's hram and test_signing
* deleted 2 rpc function (is_confirmed & get_transaction_block_number)
* deleted get_raw_transaction_hex
* deleted get_raw_transaction_info
* deleted new_address
* deleted test_mempool_accept
* updated remove(0) to remove(index)
* deleted ger_raw_transaction
* deleted RawTx trait and converted type to Transaction
* reverted raw_hex feature back
* added NotEnoughFunds to CoinError
* changed Sighash to all
* removed lifetime of RpcParams
* changed pub to pub(crate) & changed sig_hash line
* changed taproot_key_spend_signature_hash to internal
* added Clone to RpcError & deleted get_utxo_for
* changed to_hex to as_bytes for weight calculation
* updated SpendableOutput
* deleted unnecessary parentheses
* updated serialize of Output s id field
* deleted unused crate & added lazy_static
* updated RPC init function
* added lazy_static for TAG_HASH & updated imported crates
* changed get_block_index to get_block_number
* deleted get_block_info
* updated get_height to get_latest_block_number
* removed GetBlockWithDetailResult and get_block_with_transactions
* deleted unnecessary imports from rpc_helper
* removed lock and unlock_unspent
* deleted get_transactions and get_transaction and renamed get_raw_transaction to get_transaction
* updated opt_into_json
* changed payment_address and amount to output_script and amount for transcript
* refactored error logic for rpc & deleted anyhow crate
* added a dedicated file for json helper functions
* refactored imports and deleted unused code
* added clippy::non_snake_case
* removed unused Error items
* added new line to Cargo
* rekmoved Block and used bitcoin::Block direcetly
* removed added println and futures.len check
* removed HashMap from coin mod.rs
* updated Testnet to Regtest
* removed unnecessary variable
* updated as_str to &
* removed RawTx trait
* added newline
* changed test transaction to p2pkh
* updated test_send
* updated test_send
* updated test_send
* reformatted bitcoin processor
* moved sighash logic into signmachine
* removed generate_to_address
* added test_address function to bitcoin processor
* updated RpcResponse to enum and added Clone trait
* removed old RpcResponse
* updated shared_key to internal_key
* updated fee part
* updated test_send block logic
* added a test function for getting spendables
* updated tweaking keys logic
* updated calculate_weight logic
* added todo for BitcoinSchnorr Algorithm
* updated calculate_weight
* updated calculate_weight
* updated calculate_weight
* added a TODO for bitcoin's signing process
* removed unused code
* Finish merging develop
* cargo fmt
* cargo machete
* Handle most clippy lints on bitcoin
Doesn't handle the unused transcript due to pending cryptographic considerations.
* Rearrange imports and clippy tests
* Misc processor lint
* Update deny.toml
* Remove unnecessary RPC code
* updated test_send
* added bitcoin ci & updated test-dependencies yml
* fixed bitcoin ci
* updated bitcoin ci yml
* Remove mining from the bitcoin/monero docker files
The tests should control block production in order to test various
circumstances. The automatic mining disrupts assumptions made in testing. Since
we're now using the Bitcoin docker container for testing...
* Multiple fixes to the Bitcoin processor
Doesn't unwrap on RPC errors. Returns the expected connection error.
Fee calculation has a random - 1. This has been removed.
Supports the change address being an Option, as it is. This should not have
been blindly unwrapped.
* Remove unnecessary RPC code
* Further RPC simplifications
* Simplify Bitcoin action
It should not be mining.
* cargo fmt
* Finish RPC simplifications
* Run bitcoind as a daemon
* Remove the requirement on txindex
Saves tens of GB.
Also has attempt_send no longer return a list of outputs. That's incompatible
with this and only relevant to old scheduling designs.
* Remove number from Bitcoin SignableTransaction
Monero requires the current block number for decoy selection. Bitcoin doesn't
have a use.
* Ban coinbase transactions
These are burdened by maturity, so it's critically flawed to support them.
This causes the test_send function to fail as its working was premised on
a coinbase output. While it does make an actual output, it had insufficient
funds for the test's expectations due to regtest halving every 150 blocks.
In order to workaround this, the test will invalidate any existing chain,
offering a fresh start.
Also removes test_get_spendables and simplifies test_send.
* Various simplifications
Modifies SpendableOutput further to not require RPC calls at time of sign.
Removes the need to have get_transaction in the RPC.
* Clean prepare_send
* Update the Bitcoin TransactionMachine to output a Transaction
* Bitcoin TransactionMachine simplifications
* Update XOnly key handling
* Use a single sighash cache
* Move tweak_keys
* Remove unnecessary PSBT sets
* Restore removed newlines
* Other newlines
* Replace calculate_weight's custom math with a dummy TX serialize
* Move BTC TX construction code from processor to bitcoin
* Rename transactions.rs to wallet.rs
* Remove unused crate
* Note TODO
* Clean bitcoin signature test
* Make unit test out of BTC FROST signing test
* Final lint
* Remove usage of PartiallySignedTransaction
---------
Co-authored-by: Luke Parker <lukeparker5132@gmail.com>
