Fixes where ram_scanned is updated in processor. The prior version, while safe,
would redo massive amounts of work during periods of inactivity. It also hit an
undocumented invariant where get_eventuality_completions assumes new blocks,
yet redone work wouldn't have new blocks.
Modifies Monero's generate_blocks to return the hashes of the generated blocks.
We only expect processor messages when we have the relevant Tributary. We
queued Tributary creation, yet then kicked off processor messages. We need to
wait until the Tributary is actually created to kick off processor messages.
Prior to the previous commit, whatever async scheduling occurred caused them to
all have the same tip. Now, some are one block ahead of others. This adds
tolerance for that, as it's an acceptable variance, so long as it's solely one
block.
They used &mut self to prevent execution at the same time. This uses a lock
over the channel to achieve the same security, without requiring a lock over
the entire tributary.
This fixes post-provided Provided transactions. sync_block waited for the TX to
be provided, yet it never would as sync_block held a mutable reference over the
entire Tributary, preventing any other read/write operations of any scope.
A timeout increased (bc2f23f72b) due to this bug
not being identified has been decreased back, thankfully.
Also shims in basic support for Completed, which was the WIP before this bug
was identified.
The Heartbeat was meant to serve for this, yet no Heartbeats are fired when we
don't have active tributaries.
libp2p does offer an explicit KeepAlive protocol, yet it's not recommended in
prod. While this likely has the same pit falls as LibP2p's KeepAlive protocol,
it's at least tailored to our timing.
* dalek 4.0
* cargo update
Moves to a version of Substrate which uses curve25519-dalek 4.0 (not a rc).
Doesn't yet update the repo to curve25519-dalek 4.0 (as a branch does) due
to the official schnorrkel using a conflicting curve25519-dalek. This would
prevent installation of frost-schnorrkel without a patch.
* use half-aggregation for tm messages
* fmt
* fix pr comments
* cargo update
Achieves three notable updates.
1) Resolves RUSTSEC-2022-0093 by updating libp2p-identity.
2) Removes 3 old rand crates via updating ed25519-dalek (a dependency of
libp2p-identity).
3) Sets serde_derive to 1.0.171 via updating to time 0.3.26 which pins at up to
1.0.171.
The last one is the most important. The former two are niceties.
serde_derive, since 1.0.171, ships a non-reproducible binary blob in what's a
complete compromise of supply chain security. This is done in order to reduce
compile times, yet also for the maintainer of serde (dtolnay) to leverage
serde's position as the 8th most downloaded crate to attempt to force changes
to the Rust build pipeline.
While dtolnay's contributions to Rust are respectable, being behind syn, quote,
and proc-macro2 (the top three crates by downloads), along with thiserror,
anyhow, async-trait, and more (I believe also being part of the Rust project),
they have unfortunately decided to refuse to listen to the community on this
issue (or even engage with counter-commentary). Given their political agenda
they seem to try to be accomplishing with force, I'd go as far as to call their
actions terroristic (as they're using the threat of the binary blob as
justification for cargo to ship 'proper' support for binary blobs).
This is arguably representative of dtolnay's past work on watt. watt was a wasm
interpreter to execute a pre-compiled proc macro. This would save the compile
time of proc macros, yet sandbox it so a full binary did not have to be run.
Unfortunately, watt (while decreasing compile times) fails to be a valid
solution to supply chain security (without massive ecosystem changes). It never
implemented reproducible builds for its wasm blobs, and a malicious wasm blob
could still fundamentally compromise a project. The only solution for an end
user to achieve a secure pipeline would be to locally build the project,
verifying the blob aligns, yet doing so would negate all advantages of the
blob.
dtolnay also seems to be giving up their role as a FOSS maintainer given that
serde no longer works in several environments. While FOSS maintainers are not
required to never implement breaking changes, the version number is still 1.0.
While FOSS maintainers are not required to follow semver, releasing a very
notable breaking change *without a new version number* in an ecosystem which
*does follow semver*, then refusing to acknowledge bugs as bugs with their work
does meet my personal definition of "not actively maintaining their existing
work". Maintenance would be to fix bugs, not introduce and ignore.
For now, serde > 1.0.171 has been banned. In the future, we may host a fork
without the blobs (yet with the patches). It may be necessary to ban all of
dtolnay's maintained crates, if they continue to force their agenda as such,
yet I hope this may be resolved within the next week or so.
Sources:
https://github.com/serde-rs/serde/issues/2538 - Binary blob discussion
This includes several reports of various workflows being broken.
https://github.com/serde-rs/serde/issues/2538#issuecomment-1682519944
dtolnay commenting that security should be resolved via Rust toolchain edits,
not via their own work being secure. This is why I say they're trying to
leverage serde in a political game.
https://github.com/serde-rs/serde/issues/2526 - Usage via git broken
dtolnay explicitly asks the submitting user if they'd be willing to advocate
for changes to Rust rather than actually fix the issue they created. This is
further political arm wrestling.
https://github.com/serde-rs/serde/issues/2530 - Usage via Bazel broken
https://github.com/serde-rs/serde/issues/2575 - Unverifiable binary blob
https://github.com/dtolnay/watt - dtolnay's prior work on precompilation
* add Rs() api to SchnorrAggregate
* Correct serai-processor-tests to dalek 4
* fmt + deny
* Slash malevolent validators (#294)
* add slash tx
* ignore unsigned tx replays
* verify that provided evidence is valid
* fix clippy + fmt
* move application tx handling to another module
* partially handle the tendermint txs
* fix pr comments
* support unsigned app txs
* add slash target to the votes
* enforce provided, unsigned, signed tx ordering within a block
* bug fixes
* add unit test for tendermint txs
* bug fixes
* update tests for tendermint txs
* add tx ordering test
* tidy up tx ordering test
* cargo +nightly fmt
* Misc fixes from rebasing
* Finish resolving clippy
* Remove sha3 from tendermint-machine
* Resolve a DoS in SlashEvidence's read
Also moves Evidence from Vec<Message> to (Message, Option<Message>). That
should meet all requirements while being a bit safer.
* Make lazy_static a dev-depend for tributary
* Various small tweaks
One use of sort was inefficient, sorting unsigned || signed when unsigned was
already properly sorted. Given how the unsigned TXs were given a nonce of 0, an
unstable sort may swap places with an unsigned TX and a signed TX with a nonce
of 0 (leading to a faulty block).
The extra protection added here sorts signed, then concats.
* Fix Tributary tests I broke, start review on tendermint/tx.rs
* Finish reviewing everything outside tests and empty_signature
* Remove empty_signature
empty_signature led to corrupted local state histories. Unfortunately, the API
is only sane with a signature.
We now use the actual signature, which risks creating a signature over a
malicious message if we have ever have an invariant producing malicious
messages. Prior, we only signed the message after the local machine confirmed
it was okay per the local view of consensus.
This is tolerated/preferred over a corrupt state history since production of
such messages is already an invariant. TODOs are added to make handling of this
theoretical invariant further robust.
* Remove async_sequential for tokio::test
There was no competition for resources forcing them to be run sequentially.
* Modify block order test to be statistically significant without multiple runs
* Clean tests
---------
Co-authored-by: Luke Parker <lukeparker5132@gmail.com>
* Add DSTs to Tributary TX sig_hash functions
Prevents conflicts with other systems/other parts of the Tributary.
---------
Co-authored-by: Luke Parker <lukeparker5132@gmail.com>
* add slash tx
* ignore unsigned tx replays
* verify that provided evidence is valid
* fix clippy + fmt
* move application tx handling to another module
* partially handle the tendermint txs
* fix pr comments
* support unsigned app txs
* add slash target to the votes
* enforce provided, unsigned, signed tx ordering within a block
* bug fixes
* add unit test for tendermint txs
* bug fixes
* update tests for tendermint txs
* add tx ordering test
* tidy up tx ordering test
* cargo +nightly fmt
* Misc fixes from rebasing
* Finish resolving clippy
* Remove sha3 from tendermint-machine
* Resolve a DoS in SlashEvidence's read
Also moves Evidence from Vec<Message> to (Message, Option<Message>). That
should meet all requirements while being a bit safer.
* Make lazy_static a dev-depend for tributary
* Various small tweaks
One use of sort was inefficient, sorting unsigned || signed when unsigned was
already properly sorted. Given how the unsigned TXs were given a nonce of 0, an
unstable sort may swap places with an unsigned TX and a signed TX with a nonce
of 0 (leading to a faulty block).
The extra protection added here sorts signed, then concats.
* Fix Tributary tests I broke, start review on tendermint/tx.rs
* Finish reviewing everything outside tests and empty_signature
* Remove empty_signature
empty_signature led to corrupted local state histories. Unfortunately, the API
is only sane with a signature.
We now use the actual signature, which risks creating a signature over a
malicious message if we have ever have an invariant producing malicious
messages. Prior, we only signed the message after the local machine confirmed
it was okay per the local view of consensus.
This is tolerated/preferred over a corrupt state history since production of
such messages is already an invariant. TODOs are added to make handling of this
theoretical invariant further robust.
* Remove async_sequential for tokio::test
There was no competition for resources forcing them to be run sequentially.
* Modify block order test to be statistically significant without multiple runs
* Clean tests
---------
Co-authored-by: Luke Parker <lukeparker5132@gmail.com>
* restrict batch size to ~25kb
* add batch size check to node
* rate limit batches to 1 per serai block
* add support for multiple batches for block
* fix review comments
* Misc fixes
Doesn't yet update tests/processor until data flow is inspected.
* Move the block from SignId to ProcessorMessage::BatchPreprocesses
* Misc clean up
---------
Co-authored-by: Luke Parker <lukeparker5132@gmail.com>
For logging purposes, I added code to handle negative time till start. I forgot
to only sleep on positive time till start.
Should fix the recent CI failure.
It was improperly implemented, as it assumed rounds had a constant time
interval, which they do not. It also is against the spec and was meant to
absolve us of issues with poor performance when post-starting blockchains. The
new, and much more proper, workaround for the latter is a 120-second delay
between the Substrate time and the Tributary start time.
By default, tokio-spawned worker panics will only kill the task, not the
program. Due to our extensive use of panicking on invariants, we should ensure
the program exits.
It's largely unoptimized, and not yet exclusive to validators, yet has basic
sanity (using message content for ID instead of sender + index).
Fixes bugs as found. Notably, we used a time in milliseconds where the
Tributary expected seconds.
Also has Tributary::new jump to the presumed round number. This reduces slashes
when starting new chains (whose times will be before the current time) and was
the only way I was able to observe successful confirmations given current
surrounding infrastructure.
The Processor's coins folder referred to the networks it could process, as did
its Coin trait. This, and other similar cases throughout the codebase, have now
been corrected.
Also corrects dated documentation for a key pair is confirmed under the
validator-sets pallet.
