tails: persistent datadir

basicswap-bash

@@ -1,5 +1,9 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+    TAILS=1
+fi
 
 # Colors
 red="echo -e -n \e[31;1m"

bsx-addcoin

@@ -1,5 +1,8 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi
 
 # Colors
 red="printf \e[31;1m"

bsx-disabletor

@@ -1,5 +1,8 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi
 
 # Colors
 red="printf \e[31;1m"

bsx-enabletor

@@ -1,5 +1,8 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi
 
 # Colors
 red="printf \e[31;1m"

bsx-placeorder

@@ -1,5 +1,8 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi
 
 # Colors
 red="printf \e[31;1m"

bsx-removecoin

@@ -1,5 +1,8 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi
 
 # Colors
 red="printf \e[31;1m"

bsx-update

@@ -1,5 +1,8 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi
 
 # Colors
 red="printf \e[31;1m"

bsx/auto_coinupd8.sh

@@ -1,6 +1,9 @@
 #!/bin/bash
 #set -x
-SWAP_DATADIR=$HOME/coinswaps
+export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi
 BINDIR=$SWAP_DATADIR/bin
 
 echo "Checking for Coin updates" && sleep 1

bsx/setup.sh

@@ -7,8 +7,13 @@ nocolor="printf \e[0m"
 
 ## Clone basicswap git
 cd $SWAP_DATADIR
-git clone https://github.com/basicswap/basicswap
+if [[ -d basicswap ]]; then
-cd $SWAP_DATADIR/basicswap
+    cd $SWAP_DATADIR/basicswap
+    git pull || { $red"Failed to pull repo. Installation aborted"; exit; }
+else
+    git clone https://github.com/basicswap/basicswap || { $red"Failed to clone repo. Please run the installer again"; exit; }
+    cd $SWAP_DATADIR/basicswap
+fi
 
 ## Macos
 if [[ $MACOS ]]; then
@@ -19,17 +24,6 @@ fi
 $SWAP_DATADIR/venv/bin/pip3 install -r requirements.txt --require-hashes
 $SWAP_DATADIR/venv/bin/pip3 install .
 
-## Decide a source for Monero's restore height
-if [[ "$xmrrestoreheight" ]]; then
-	CURRENT_XMR_HEIGHT=$xmrrestoreheight
-elif [[ "$monerod_addr" ]]; then
-	# Use custom Monero node
-	CURRENT_XMR_HEIGHT=$(curl "http://$monerod_addr:$monerod_port/get_info" | jq .height)
-else
-	# Use public node
-	CURRENT_XMR_HEIGHT=$(curl http://node3.monerodevs.org:18089/get_info | jq .height)
-fi
-
 # Use Tor if we want
 enable_tor() {
 	if [[ "$tor_on" = 1 ]]; then
@@ -42,22 +36,26 @@ if   [[ "$particl_mnemonic" && "$monerod_addr" ]]; then
 	# Restore seed
 	PARTICL_MNEMONIC=$particl_mnemonic
 	XMR_RPC_HOST=$monerod_addr XMR_RPC_PORT=$monerod_port \
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC"
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC" || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
 	enable_tor
 elif [[ "$particl_mnemonic" ]]; then
 	# Restore seed
 	PARTICL_MNEMONIC=$particl_mnemonic
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC"
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC" || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
 	enable_tor
 elif [[ "$monerod_addr" ]]; then
 	# Setup new install and use a remote monero node
 	XMR_RPC_HOST=$monerod_addr XMR_RPC_PORT=$monerod_port \
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
 	$red"\n\nMake note of your seed above\n\n"; $nocolor
 	enable_tor
 else
 	# Setup new install using local nodes
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
 	$red"\n\nMake note of your seed above\n\n"; $nocolor
 	enable_tor
 fi

bsx/tails_setup.sh

@@ -7,8 +7,13 @@ nocolor="printf \e[0m"
 
 ## Clone basicswap git
 cd $SWAP_DATADIR
-git clone https://github.com/basicswap/basicswap
+if [[ -d basicswap ]]; then
-cd $SWAP_DATADIR/basicswap
+    cd $SWAP_DATADIR/basicswap
+    git pull || { $red"Failed to pull repo. Installation aborted"; exit; }
+else
+    git clone https://github.com/basicswap/basicswap || { $red"Failed to clone repo. Please run the installer again"; exit; }
+    cd $SWAP_DATADIR/basicswap
+fi
 
 ## Macos
 if [[ $MACOS ]]; then
@@ -19,17 +24,6 @@ fi
 torsocks $SWAP_DATADIR/venv/bin/pip3 install -r requirements.txt --require-hashes
 torsocks $SWAP_DATADIR/venv/bin/pip3 install .
 
-## Decide a source for Monero's restore height
-if [[ "$xmrrestoreheight" ]]; then
-	CURRENT_XMR_HEIGHT=$xmrrestoreheight
-elif [[ "$monerod_addr" ]]; then
-	# Use custom Monero node
-	CURRENT_XMR_HEIGHT=$(curl "http://$monerod_addr:$monerod_port/get_info" | jq .height)
-else
-	# Use public node
-	CURRENT_XMR_HEIGHT=$(curl http://node3.monerodevs.org:18089/get_info | jq .height)
-fi
-
 # Use Tor if we want
 enable_tor() {
 	if [[ "$tor_on" = 1 ]]; then
@@ -42,22 +36,26 @@ if   [[ "$particl_mnemonic" && "$monerod_addr" ]]; then
 	# Restore seed
 	PARTICL_MNEMONIC=$particl_mnemonic
 	XMR_RPC_HOST=$monerod_addr XMR_RPC_PORT=$monerod_port \
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC"
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC" || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
 	enable_tor
 elif [[ "$particl_mnemonic" ]]; then
 	# Restore seed
 	PARTICL_MNEMONIC=$particl_mnemonic
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC"
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC" || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
 	enable_tor
 elif [[ "$monerod_addr" ]]; then
 	# Setup new install and use a remote monero node
 	XMR_RPC_HOST=$monerod_addr XMR_RPC_PORT=$monerod_port \
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
 	$red"\n\nMake note of your seed above\n\n"; $nocolor
 	enable_tor
 else
 	# Setup new install using local nodes
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
 	$red"\n\nMake note of your seed above\n\n"; $nocolor
 	enable_tor
 fi

install.sh

@@ -1,16 +1,41 @@
 #/bin/bash
+#set -x
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi
 
 # Colors
 red="printf \e[31;1m"
 green="printf \e[32;1m"
 nocolor="printf \e[0m"
 
+# Check if bsx is already installedo
+chain=(particl monero wownero dash decred firo litecoin bitcoin bitcoincash pivx)
+for coin in "${chain[@]}"; do
+    if [[ -f "${SWAP_DATADIR}/${coin}/${coin}.conf" ]]; then
+        printf "Existing configuration file found at ${SWAP_DATADIR}/${coin}/${coin}.conf\n"
+        abort=1
+    fi
+    if [[ -f "${SWAP_DATADIR}/${coin}/${coin}d.conf" ]]; then
+        printf "Existing configuration file found at ${SWAP_DATADIR}/${coin}/${coin}d.conf\n"
+        abort=1
+    fi
+done
+if [[ -f "${SWAP_DATADIR}/basicswap.json" ]]; then
+    printf "Existing configuration file(s) found at ${SWAP_DATADIR}/basicswap.json.\n"
+    abort=1
+fi
+if [[ $abort ]]; then
+    $red"Aborting install\n"; $nocolor; exit
+fi
+
+
 # Check if basicswap is running
-if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
+if [[ -f ${SWAP_DATADIR}/particl/particl.pid ]]; then
-    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
+    bsx_pid=$(cat ${SWAP_DATADIR}/particl/particl.pid)
     if [[ $bsx_pid ]]; then
-        bsx_run=$(pidof particld | grep $bsx_pid)
+        bsx_run=$(pgrep particld | grep $bsx_pid)
         if [[ $bsx_run ]]; then
             $red"\nError: BasicSwapDEX is already installed.\n"; $nocolor
             exit
@@ -92,7 +117,7 @@ $INSTALL $DEPENDENCY automake libtool jq
 # Enable tor
 printf "\n[1] Tor ON (requires sudo)\n[2] Tor OFF\n"
 until [[ "$tor_on" =~ ^[12]$ ]]; do
-read -p 'Select an option: [1|2] ' tor_on
+read -p 'Select an option: [1|2]: ' tor_on
 	case $tor_on in
 		1)
 		$green"BasicSwapDEX will use Tor\n";$nocolor
@@ -109,7 +134,7 @@ done
 ## Particl restore Seed
 printf "\n[1] New Install (default)\n[2] Restore from Particl Seed\n"
 until [[ "$restore" =~ ^[12]$ ]]; do
-read -p 'Select an option: [1|2] ' restore
+read -p 'Select an option: [1|2]: ' restore
 	case $restore in
 		1)
 		$green"Installing BasicSwapDEX\n"; $nocolor
@@ -167,10 +192,17 @@ read -p 'Select an option [1|2]: ' l
 			else
 				$red"The node at $monerod_addr:$monerod_port is not accessible. Try again\n"; $nocolor
 			fi
+
 		done
+		if [[ -z $xmrrestoreheight ]]; then
+			xmrrestoreheight="${checknode}"
+		fi
+			$green"Monero wallet Restore Height set to ${xmrrestoreheight}\n"; $nocolor
 		;;
 		2)
+		xmrrestoreheight=$(curl -s http://node3.monerodevs.org:18089/get_info | jq .height || { echo "Failed to get Monero blockchain height. Please run the installer again."; exit; })
 		$green"BasicSwapDEX will run the Monero node for you.\n"; $nocolor
+		$green"Monero wallet Restore Height set to ${xmrrestoreheight}\n"; $nocolor
 		;;
 		*)
 		$red"You must answer 1 or 2\n"; $nocolor
@@ -214,12 +246,12 @@ fi
 cp -r basicswap-bash bsx* $HOME/.local/bin/
 
 ## Make venv and set variables for install
-export monerod_addr=$monerod_addr
+export monerod_addr="${monerod_addr}"
-export monerod_port=$monerod_port
+export monerod_port="${monerod_port}"
-export particl_mnemonic=$particl_mnemonic
+export particl_mnemonic="${particl_mnemonic}"
-export xmrrestoreheight=$xmrrestoreheight
+export xmrrestoreheight="${xmrrestoreheight}"
-export tor_on=$tor_on
+export tor_on="${tor_on}"
-export TAILS=$TAILS
+export TAILS="${TAILS}"
-python3 -m venv "$SWAP_DATADIR/venv"
+python3 -m venv "${SWAP_DATADIR}/venv"
 ## Activate venv
 $HOME/.local/bin/bsx/activate_venv.sh