later

placeorders: use python to check offer size
tails: persistent datadir
2024-12-22 11:39:21 +00:00 · 2024-11-11 15:54:25 +00:00 · 2024-11-10 14:52:21 +00:00 · 2024-11-09 20:55:47 +00:00 · 2024-11-09 20:55:40 +00:00 · 2024-11-09 04:38:18 +00:00
16 changed files with 335 additions and 298 deletions
--- a/4
+++ b/4
@ -1,5 +1,9 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+    TAILS=1
+fi

 # Colors
 red="echo -e -n \e[31;1m"
--- a/13
+++ b/13
@ -1,16 +1,19 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi

 # Colors
-red="echo -e -n \e[31;1m"
-green="echo -e -n \e[32;1m"
-nocolor="echo -e -n \e[0m"
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"

 # Check if basicswap is running
 if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
    if [[ $bsx_pid ]]; then
-        bsx_run=$(pidof particld | grep $bsx_pid)
+        bsx_run=$(pgrep particld | grep $bsx_pid)
        if [[ $bsx_run ]]; then
            $red"\nError: BasicSwapDEX is running.\n"; $nocolor
            exit
@ -18,7 +21,7 @@ if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
    fi
 fi

-echo -e "BasicSwapDEX is currently:\n[1] Password protected\n[2] NOT password protected\n"
+printf "BasicSwapDEX is currently:\n[1] Password protected\n[2] NOT password protected\n\n"
 until [[ "$l" =~ ^[12]$ ]]; do
 read -p 'Select an option [1|2]: ' l
 	case $l in
--- a/13
+++ b/13
@ -1,16 +1,19 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi

 # Colors
-red="echo -e -n \e[31;1m"
-green="echo -e -n \e[32;1m"
-nocolor="echo -e -n \e[0m"
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"

 # Check if basicswap is running
 if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
    if [[ $bsx_pid ]]; then
-        bsx_run=$(pidof particld | grep $bsx_pid)
+        bsx_run=$(pgrep particld | grep $bsx_pid)
        if [[ $bsx_run ]]; then
            $red"\nError: BasicSwapDEX is running.\n"; $nocolor
            exit
@ -18,7 +21,7 @@ if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
    fi
 fi

-echo -e "BasicSwapDEX is currently:\n[1] Password protected\n[2] NOT password protected\n"
+printf "BasicSwapDEX is currently:\n[1] Password protected\n[2] NOT password protected\n\n"
 until [[ "$l" =~ ^[12]$ ]]; do
 read -p 'Select an option [1|2]: ' l
        case $l in
--- a/13
+++ b/13
@ -1,16 +1,19 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi

 # Colors
-red="echo -e -n \e[31;1m"
-green="echo -e -n \e[32;1m"
-nocolor="echo -e -n \e[0m"
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"

 # Check if basicswap is running
 if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
    if [[ $bsx_pid ]]; then
-        bsx_run=$(pidof particld | grep $bsx_pid)
+        bsx_run=$(pgrep particld | grep $bsx_pid)
        if [[ $bsx_run ]]; then
            $red"\nError: BasicSwapDEX is running.\n"; $nocolor
            exit
@ -18,7 +21,7 @@ if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
    fi
 fi

-echo -e "BasicSwapDEX is currently:\n[1] Password protected\n[2] NOT password protected\n"
+printf "BasicSwapDEX is currently:\n[1] Password protected\n[2] NOT password protected\n\n"
 until [[ "$l" =~ ^[12]$ ]]; do
 read -p 'Select an option [1|2]: ' l
        case $l in
--- a/13
+++ b/13
@ -1,15 +1,18 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi

 # Colors
-red="echo -e -n \e[31;1m"
-green="echo -e -n \e[32;1m"
-nocolor="echo -e -n \e[0m"
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"

 # Check if basicswap is running
 if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
-    bsx_run=$(pidof particld | grep $bsx_pid)
+    bsx_run=$(pgrep particld | grep $bsx_pid)
    if ! [[ $bsx_run ]]; then
        $red"\nError: BasicSwapDEX must be running.\n"; $nocolor
        exit
@ -19,7 +22,7 @@ else
    exit
 fi

-mv $HOME/.local/bin/bsx/placeorders/* $SWAP_DATADIR/basicswap/scripts/
+cp $HOME/.local/bin/bsx/placeorders/* $SWAP_DATADIR/basicswap/scripts/.
 cd $SWAP_DATADIR/basicswap/scripts/

 ./placeorders.sh
--- a/13
+++ b/13
@ -1,16 +1,19 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi

 # Colors
-red="echo -e -n \e[31;1m"
-green="echo -e -n \e[32;1m"
-nocolor="echo -e -n \e[0m"
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"

 # Check if basicswap is running
 if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
    if [[ $bsx_pid ]]; then
-        bsx_run=$(pidof particld | grep $bsx_pid)
+        bsx_run=$(pgrep particld | grep $bsx_pid)
        if [[ $bsx_run ]]; then
            $red"\nError: BasicSwapDEX is running.\n"; $nocolor
            exit
@ -18,7 +21,7 @@ if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
    fi
 fi

-echo -e "BasicSwapDEX is currently:\n[1] Password protected\n[2] NOT password protected\n"
+printf "BasicSwapDEX is currently:\n[1] Password protected\n[2] NOT password protected\n\n"
 until [[ "$l" =~ ^[12]$ ]]; do
 read -p 'Select an option [1|2]: ' l
        case $l in
--- a/11
+++ b/11
@ -1,16 +1,19 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi

 # Colors
-red="echo -e -n \e[31;1m"
-green="echo -e -n \e[32;1m"
-nocolor="echo -e -n \e[0m"
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"

 # Check if basicswap is running
 if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
    if [[ $bsx_pid ]]; then
-        bsx_run=$(pidof particld | grep $bsx_pid)
+        bsx_run=$(pgrep particld | grep $bsx_pid)
        if [[ $bsx_run ]]; then
            $red"\nError: BasicSwapDEX is running.\n"; $nocolor
            exit
--- a/bsx/addcoin.sh
+++ b/bsx/addcoin.sh
@ -1,7 +1,7 @@
 #!/bin/bash

 ## Prompt for user input
-echo -e "\n\nThe following coins can be added (case sensitive)\nbitcoin\ndash\ndecred\nfiro\nlitecoin\npivx\nwownero\n"
+printf "\n\nThe following coins can be added (case sensitive)\nbitcoin\ndash\ndecred\nfiro\nlitecoin\npivx\nwownero\n\n"
 read -p 'Full name of coin to add [example: litecoin] ' addcoin
 ## Confirm
 read -p $'\nAdd '$addcoin' to your BasicSwap install, correct? Press ENTER to continue. CTRL-C to exit'
--- a/bsx/auto_coinupd8.sh
+++ b/bsx/auto_coinupd8.sh
@ -1,85 +1,46 @@
 #!/bin/bash
 #set -x
-SWAP_DATADIR=$HOME/coinswaps
+export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi
+BINDIR=$SWAP_DATADIR/bin

 echo "Checking for Coin updates" && sleep 1

-if [[ -d $SWAP_DATADIR/bin/bitcoin ]]; then
-  BTC=$($SWAP_DATADIR/bin/bitcoin/bitcoind --version | grep version | grep -Fxf $SWAP_DATADIR/basicswap/core_versions)
-  if [[ -z $BTC ]]; then
-    echo "Updating Bitcoin"
-    Bitcoin="bitcoin,"
+chain=(
+bitcoin
+dash
+decred
+firo
+litecoin
+particl
+pivx
+monero
+wownero
+)
+
+list=""
+select=""
+for coin in "${chain[@]}"; do
+  if [[ -d $BINDIR/$coin ]]; then
+    if [[ $coin == decred ]]; then
+      UPDATE=$($BINDIR/$coin/dcrd --version | head -n 1 | grep -Fxf $SWAP_DATADIR/basicswap/core_versions)
+    else
+      UPDATE=$($BINDIR/$coin/"$coin"d --version | head -n 1 | grep -Fxf $SWAP_DATADIR/basicswap/core_versions)
+    fi
+    if [[ -z $UPDATE ]]; then
+      select+="$coin,"
+      list=${select%,}
+    fi
  fi
-fi
+done

-if [[ -d $SWAP_DATADIR/bin/dash ]]; then
-  DASH=$($SWAP_DATADIR/bin/dash/dashd --version | grep version | grep -Fxf $SWAP_DATADIR/basicswap/core_versions)
-  if [[ -z $DASH ]]; then
-    echo "Updating Dash"
-    Dash="dash,"
-  fi
-fi
+echo "Updating $list"

-if [[ -d $SWAP_DATADIR/bin/decred ]]; then
-  DCR=$($SWAP_DATADIR/bin/decred/dcrd --version | grep version | grep -Fxf $SWAP_DATADIR/basicswap/core_versions)
-  if [[ -z $DCR ]]; then
-    echo "Updating Decred"
-    Decred="decred,"
-  fi
-fi
-
-if [[ -d $SWAP_DATADIR/bin/firo ]]; then
-  FIRO=$($SWAP_DATADIR/bin/firo/firod --version | grep version | grep -Fxf $SWAP_DATADIR/basicswap/core_versions)
-  if [[ -z $FIRO ]]; then
-    echo "Updating Firo"
-    Firo="firo,"
-  fi
-fi
-
-if [[ -d $SWAP_DATADIR/bin/litecoin ]]; then
-  LTC=$($SWAP_DATADIR/bin/litecoin/litecoind --version | grep version | grep -Fxf $SWAP_DATADIR/basicswap/core_versions)
-  if [[ -z $LTC ]]; then
-    echo "Updating Litecoin"
-    Litecoin="litecoin,"
-  fi
-fi
-
-if [[ -d $SWAP_DATADIR/bin/particl ]]; then
-  PART=$($SWAP_DATADIR/bin/particl/particld --version | grep version | grep -Fxf $SWAP_DATADIR/basicswap/core_versions)
-  if [[ -z $PART ]]; then
-    echo "Updating Particl"
-  fi
-fi
-
-if [[ -d $SWAP_DATADIR/bin/pivx ]]; then
-  PIVX=$($SWAP_DATADIR/bin/pivx/pivxd --version | grep version | grep -Fxf $SWAP_DATADIR/basicswap/core_versions)
-  if [[ -z $PIVX ]]; then
-    echo "Updating PIVX"
-    Pivx="pivx,"
-  fi
-fi
-
-if [[ -d $SWAP_DATADIR/bin/monero ]]; then
-  XMR=$($SWAP_DATADIR/bin/monero/monerod --version | grep -Fxf $SWAP_DATADIR/basicswap/core_versions)
-  if [[ -z $XMR ]]; then
-    echo "Updating Monero"
-    Monero="monero,"
-  fi
-fi
-
-if [[ -d $SWAP_DATADIR/bin/wownero ]]; then
-  WOW=$($SWAP_DATADIR/bin/wownero/wownerod --version | grep -Fxf $SWAP_DATADIR/basicswap/core_versions)
-  if [[ -z $WOW ]]; then
-    echo "Updating Wownero"
-    Wownero="wownero,"
-  fi
-fi
-
-sleep 1
-
-if [[ -n $Bitcoin ]] || [[ -n $Dash ]] || [[ -n $Decred ]] || [[ -n $Firo ]] || [[ -n $Litecoin ]] || [[ -n $Particl ]] || [[ -n $Pivx ]] || [[ -n $Monero ]] || [[ -n $Wownero ]]; then
+if [[ -n $select ]]; then
  . $SWAP_DATADIR/venv/bin/activate
-  basicswap-prepare --datadir=$SWAP_DATADIR --preparebinonly --withcoins="$Bitcoin$Dash$Decred$Firo$Litecoin$Pivx$Monero$Wownero"particl
+  basicswap-prepare --datadir=$SWAP_DATADIR --preparebinonly --withcoins=$list
 else
  echo "Coin Cores are up to date"
 fi
--- a/bsx/enabletor.sh
+++ b/bsx/enabletor.sh
@ -1,36 +1,58 @@
 #!/bin/bash

 # Colors
-red="echo -e -n \e[31;1m"
-green="echo -e -n \e[32;1m"
-nocolor="echo -e -n \e[0m"
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"

 # Detect Operating system
 INSTALL=""
 UPDATE=""
-INIT_TOR="sudo systemctl restart tor"
+INIT_TOR=""
+SYSTEMD_TOR="sudo systemctl restart tor"
+
+check_tails() {
+        if [[ $USER == amnesia ]]; then
+            $green"\n\nDetected Tails";$nocolor
+            TAILS=1
+        else
+            $green"\n\nDetected Debian";$nocolor
+        fi
+}
+
 detect_os_arch() {
-    if type -P apt > /dev/null; then
+    if [[ $(uname -s) = "Darwin" ]]; then
+        # MacOS
+        export MACOS=1
+        if type -p brew > /dev/null; then
+            $green"Homebrew is installed\n";$nc
+            INSTALL="brew install"
+        else
+            $green"Installing Homebrew\n";$nc
+            INSTALL="curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh | /bin/bash && brew install"
+        fi
+	INIT_TOR="pkill tor && tor"
+        $green"\n\nDetected MacOS";$nocolor
+    elif type -p apt > /dev/null; then
+        check_tails
        # Debian / Ubuntu / Mint
-        INSTALL="sudo apt install -y"
+        INSTALL="sudo apt install"
        UPDATE="sudo apt update"
-        $green"\nDetected Debian\n";$nocolor
-    elif type -P dnf > /dev/null; then
+	INIT_TOR=$SYSTEMD_TOR
+    elif type -p dnf > /dev/null; then
        # Fedora
-        INSTALL="sudo dnf install -y"
+        INSTALL="sudo dnf install"
        UPDATE="sudo dnf check-update"
-        $green"\nDetected Fedora\n";$nocolor
-    elif type -P pacman > /dev/null; then
+	INIT_TOR=$SYSTEMD_TOR
+        $green"\n\nDetected Fedora";$nocolor
+    elif type -p pacman > /dev/null; then
        # Arch Linux
        INSTALL="sudo pacman -S"
        UPDATE="sudo pacman -Syu"
-        $green"\nDetected Arch Linux\n";$nocolor
-    elif type -P brew > /dev/null; then
-        # MacOS
-        INSTALL="brew install"
-        $green"\nDetected MacOS\n";$nocolor
+	INIT_TOR=$SYSTEMD_TOR
+        $green"\n\nDetected Arch Linux";$nocolor
    else
-        $red"Failed to detect OS. Unsupported or unknown distribution.\nInstall Failed.";$nocolor
+        $red"\nFailed to detect OS. Unsupported or unknown distribution.\nInstall Failed.\n";$nocolor
        exit
    fi
 }
@ -38,8 +60,8 @@ detect_os_arch() {
 detect_os_arch

 # Check for Tor installation
-if type -P tor > /dev/null; then
-	echo -e "\nTor is already installed :)"
+if type -p tor > /dev/null; then
+	printf "\nTor is already installed :)\n"
 else
 	# Install and configure tor
 	echo "Installing Tor..."
@ -48,7 +70,7 @@ else
 fi

 # Create HashedControlPassword
-echo -e "In the next step you'll choose a password. NOTE: It will be saved in PLAIN TEXT."
+printf "In the next step you'll choose a password. NOTE: It will be saved in PLAIN TEXT.\n"
 read -p "Enter a (new) tor control password [example: 123123] " torcontrolpass
 # Edit /etc/tor/torrc
 torhashedpass=$(tor --hash-password $torcontrolpass)
@ -57,9 +79,9 @@ skipcontrol=$(sudo grep -x "$enabledcontrol" /etc/tor/torrc)
 echo "Check torrc for enabled ControlPort"
 if [[ $skipcontrol ]]; then
 	# Use Existing enabled ControlPort and append HashedControlPassword
-	echo -e "# Added by basicswap-bash\nHashedControlPassword $torhashedpass" | sudo tee -a /etc/tor/torrc
+	printf "# Added by basicswap-bash\nHashedControlPassword $torhashedpass\n" | sudo tee -a /etc/tor/torrc
 else
-	echo -e "# Added by basicswap-bash\n$enabledcontrol\nHashedControlPassword $torhashedpass" | sudo tee -a /etc/tor/torrc
+	printf "# Added by basicswap-bash\n$enabledcontrol\nHashedControlPassword $torhashedpass\n" | sudo tee -a /etc/tor/torrc
 fi

 # Restart tor to apply
--- a/bsx/placeorders/placeorders.sh
+++ b/bsx/placeorders/placeorders.sh
@ -26,13 +26,13 @@ MIN_TAKER=""
 ############################

 # Colors
-cy="echo -e -n \e[36;1m"
+cy="printf \e[36;1m"
 cy2="\e[36;1m"
-red="echo -e -n \e[31;1m"
+red="printf \e[31;1m"
 red2="\e[31;1m"
-grn="echo -e -n \e[32;1m"
+grn="printf \e[32;1m"
 grn2="\e[32;1m"
-nc="echo -e -n \e[0m"
+nc="printf \e[0m"
 nc2="\e[0m"

 # Choose Coins
@ -48,7 +48,7 @@ coin_prompt_sell() {
 }
 coin() {
 	coin=""
-	echo -e "\n[1] Bitcoin\n[2] Monero\n[3] Litecoin\n[4] Firo\n[5] Dash\n[6] Decred\n[7] PIVX\n[8] Particl\n[9] Wownero\n"
+	printf "\n[1] Bitcoin\n[2] Monero\n[3] Litecoin\n[4] Firo\n[5] Dash\n[6] Decred\n[7] PIVX\n[8] Particl\n[9] Wownero\n\n"
 	until [[ $coin =~ ^[1-9]$ ]]; do
 		read -p 'Select an option: ' coin
 		case $coin in
@ -88,7 +88,7 @@ coin() {
 			   coinname="Wownero"
 			   coinsymbol="WOW"
 			;;
-			*) $red "\nYou must answer 1-9\n"; $nc
+			*) $red"\nYou must answer 1-9\n"; $nc
 			;;
 		esac
 	done
@ -126,48 +126,56 @@ book_min() {
 }

 set_fiat() {
-	echo -e "[1] USD [default]\n[2] EUR\n[3] CAD\n[4] AUD\n[5] CUSTOM"
+	printf "[1] USD [default]\n[2] EUR\n[3] CAD\n[4] AUD\n[5] CUSTOM\n\n"
 	read -p 'Select an option: ' fiat_select
 	case $fiat_select in
 		1) FIAT=USD
 		   fiat=usd
+		   echo "USD"
 		;;
 		2) FIAT=EUR
 		   fiat=eur
+		   echo "EUR"
 		;;
 		3) FIAT=CAD
 		   fiat=cad
+		   echo "CAD"
 		;;
 		4) FIAT=AUD
 		   fiat=aud
+		   echo "AUD"
 		;;
 		5) read -p 'Please enter the lowecase 3 character currency code [example: jpy] ' FIAT
 		   fiat=$FIAT
 		;;
 		*) FIAT=USD
 		   fiat=usd
+		   echo "USD"
+
 		;;
 	esac
 }

 coin_price() {
-	echo -e "\nCurrent Market Rates are.."
-	YOUR_FIAT=$(curl -s "https://api.coingecko.com/api/v3/simple/price?ids=$THEIR_COIN,$YOUR_COIN&vs_currencies=$fiat" | jq -r ".$YOUR_COIN.$fiat")
-	THEIR_FIAT=$(curl -s "https://api.coingecko.com/api/v3/simple/price?ids=$THEIR_COIN,$YOUR_COIN&vs_currencies=$fiat" | jq -r ".$THEIR_COIN.$fiat")
+	printf "\n\nCurrent Market Rates are..\n"
+	curl -s "https://api.coingecko.com/api/v3/simple/price?ids=$THEIR_COIN,$YOUR_COIN&vs_currencies=$fiat" > rates.txt
+	YOUR_FIAT=$(cat rates.txt | jq -r ".$YOUR_COIN.$fiat")
+	THEIR_FIAT=$(cat rates.txt | jq -r ".$THEIR_COIN.$fiat")
 	TAKER_RATE=$(echo $THEIR_FIAT $YOUR_FIAT | awk '{ printf "%.8f\n", $1 / $2 }' )
 	MAKER_RATE=$(echo $TAKER_RATE | awk '{ printf "%.8f\n", 1 / $1 }')
 	$cy"$THEIR_FIAT $FIAT$nc2/$grn2$theircoin$nc2 which is $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin$nc2\n"
 	$cy"$YOUR_FIAT $FIAT$nc2/$red2$yourcoin$nc2 which is $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin$nc2\n"
+	rm rates.txt
 }

 buy_sell() {
-	echo -e "\n[1] BUY a specific amount of $grn2$theircapital$nc2\n[2] SELL a specific amount of your $red2$yourcapital$nc2\n"
+	printf "\n\n[1] BUY a specific amount of $grn2$theircapital$nc2\n[2] SELL a specific amount of your $red2$yourcapital$nc2\n\n"
 	until [[ $BUYORSELL =~ ^[12]$ ]]; do
 		read -p 'Select an option: ' BUYORSELL
 		case $BUYORSELL in
-			1) read -p "How much $theircapital do you want to BUY? [example: 1] " AMOUNT
-			   $cy "\nRate you will pay:\n";$nc
-			   echo -e "[1] CUSTOM: Specific Crypto Rate $red2$yourcoin$nc2/$grn2$theircoin$nc2\n[2] CUSTOM: $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin $cy2+/- CUSTOM Percent$nc2\n[3] PRESET: $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin$nc2\n[4] PRESET: $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin $cy2+ $PERCENT%$nc2\n[ENTER] FIAT: Enter a $cy2$FIAT$nc2 rate to pay"
+			1) read -p $'\nHow much '"$theircapital"' do you want to BUY? [example: 1] ' AMOUNT
+			   $cy"\nRate you will pay:\n";$nc
+			   printf "\n[1] CUSTOM: Specific Crypto Rate $red2$yourcoin$nc2/$grn2$theircoin$nc2\n[2] CUSTOM: $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin $cy2+/- CUSTOM Percent$nc2\n[3] PRESET: $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin$nc2\n[4] PRESET: $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin $cy2+ $PERCENT%%$nc2\n[ENTER] FIAT: Enter a $cy2$FIAT$nc2 rate to pay\n\n"
 			   read -p 'Select an option: ' RATESEL
 			   case $RATESEL in
 				1) read -p $"At what rate would you like to Pay? [example: $TAKER_RATE] " RATE
@ -191,12 +199,12 @@ buy_sell() {
 				;;
 			   esac
 			   MAKER_RATE=$(echo $RATE | awk '{ printf "%.8f\n", 1 / $1 }')
-			   echo -e "\nPaying: $red2 $PRICE$FIAT$nc2 which is $red2($RATE $yourcoin$nc2/$grn2$theircoin$nc2)"
-			   echo -e "Rate to be paid: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin$nc2\n"
+			   printf "\nPaying: $red2 $PRICE$FIAT$nc2 which is $red2($RATE $yourcoin$nc2/$grn2$theircoin$nc2)\n"
+			   printf "Rate to be paid: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin$nc2\n\n"
 			;;
-			2) read -p "How much YOUR $yourcapital do you want to SELL [example: 1] " AMOUNT
-			   $cy "\nRate to charge:\n";$nc
-			   echo -e "[1] CUSTOM: Specific Crypto Rate $grn2$theircoin$nc2/$red2$yourcoin$nc2\n[2] CUSTOM: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin $cy2+/- CUSTOM Percent$nc2\n[3] PRESET: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin$nc2\n[4] PRESET: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin $cy2+ $PERCENT%$nc2\n[ENTER] FIAT: Enter a $cy2$FIAT$nc2 rate to charge"
+			2) read -p $'\nHow much YOUR '"$yourcapital"' do you want to SELL [example: 1] ' AMOUNT
+			   $cy"\nRate to charge:\n";$nc
+			   printf "\n[1] CUSTOM: Specific Crypto Rate $grn2$theircoin$nc2/$red2$yourcoin$nc2\n[2] CUSTOM: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin $cy2+/- CUSTOM Percent$nc2\n[3] PRESET: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin$nc2\n[4] PRESET: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin $cy2+ $PERCENT%%$nc2\n[ENTER] FIAT: Enter a $cy2$FIAT$nc2 rate to charge\n\n"
 			   read -p 'Select an option: ' RATESEL
 			   case $RATESEL in
 				1) read -p $"Enter specific rate to Charge? [example: $MAKER_RATE] " RATE
@ -220,9 +228,9 @@ buy_sell() {
 				;;
 				esac
 			   TAKER_RATE=$(echo $RATE | awk '{ printf "%.8f\n", 1 / $1 }')
-			   echo -e "Selling at $PRICE$FIAT which is a rate of $grn2$RATE $theircoin$nc2/$red2$yourcoin$nc2"
+			   printf "Selling at $PRICE$FIAT which is a rate of $grn2$RATE $theircoin$nc2/$red2$yourcoin$nc2\n"
 			;;
-			*) $red "\nYou must answer 1 or 2\n"; $nc
+			*) $red"\nYou must answer 1 or 2\n"; $nc
 			;;
 		esac
 	done
@ -232,7 +240,7 @@ buy_sell() {
 split_orders() {
 	if [ $ALLOW_SPLIT_ORDERS = true ]; then
 		MIN_SWAP=$(echo $AMOUNT $MAXBIDS | awk '{ printf "%.0f\n", $1 / $2 }')
-		echo -e "$cy2#TODO$nc2 Splitting into multiple bids if necessary. $red2$MAXBIDS$nc2 tx at most"
+		printf "$cy2#TODO$nc2 Splitting into multiple bids if necessary. $red2$MAXBIDS$nc2 tx at most\n"
 	else
 		MIN_SWAP=$AMOUNT
 		$red"One order only. Not Recommended";$nc
@ -249,14 +257,14 @@ apply_config() {
 	sed -i -z "s/COIN_TO_BUY/$theircapital/" $taker $maker
 	sed -i -z "s/PERCENT/$PERCENT/" $maker
 	sed -i -z "s/MAXBIDS/$MAXBIDS/" $taker
-	echo -e "\nMinumum amt per swap	= $grn2$MIN_TAKER $theircoin$nc2"
-	echo -e "			= $red2$MIN_SWAP $yourcoin$nc2\n"
+	printf "\nMinumum amt per swap	= $grn2$MIN_TAKER $theircoin$nc2\n"
+	printf "			= $red2$MIN_SWAP $yourcoin$nc2\n\n"
 	if [[ $BUYORSELL = 1 ]]; then
 		MAKERAMOUNT=$(echo $AMOUNT $MAKER_RATE | awk '{ printf "%.8f\n", $1 / $2 }')
 		OB_AMOUNT=$MAKERAMOUNT
-		INCREMENT=$(echo $OB_AMOUNT | awk '{ printf "%.4f", $1 / 10 }')
-		echo -e "Outgoing: $red2$MAKERAMOUNT $yourcoin$nc2"
-		echo -e "Incoming: $grn2~$AMOUNT $theircoin$nc2"
+		INCREMENT=$(echo $OB_AMOUNT | awk '{ printf "%.4f", $1 / 100 }') # TODO make offers repeat
+		printf "Outgoing: $red2$MAKERAMOUNT $yourcoin$nc2\n"
+		printf "Incoming: $grn2~$AMOUNT $theircoin$nc2\n"
 		sed -i -z "s/AMOUNT/$MAKERAMOUNT/g" $maker
 		sed -i -z "s/RATE/$MAKER_RATE/" $maker
 		sed -i -z "s/RATE/$RATE/" $taker
@ -265,9 +273,9 @@ apply_config() {
 	else
 		TAKERAMOUNT=$(echo $AMOUNT $MAKER_RATE | awk '{ printf "%.8f\n", $1 * $2 }')
 		OB_AMOUNT=$AMOUNT
-		INCREMENT=$(echo $OB_AMOUNT | awk '{ printf "%.4f", $1 / 10 }')
-		echo -e "Outgoing: $red2$AMOUNT $yourcoin$nc2"
-		echo -e "Incoming: $grn2~$TAKERAMOUNT $theircoin$nc2"
+		INCREMENT=$(echo $OB_AMOUNT | awk '{ printf "%.4f", $1 / 100 }') # TODO make offers repeat
+		printf "Outgoing: $red2$AMOUNT $yourcoin$nc2\n"
+		printf "Incoming: $grn2~$TAKERAMOUNT $theircoin$nc2\n"
 		sed -i -z "s/AMOUNT/$TAKERAMOUNT/g" $taker
 		sed -i -z "s/RATE/$TAKER_RATE/" $taker
 		sed -i -z "s/RATE/$RATE/" $maker
@ -284,28 +292,25 @@ revert_config() {

 check_bids() {
 	# oneshot. Check for matching offers before posting one
+	revert_config
 	apply_config
-	FOUNDBID=$(python createoffers.py --configfile $taker --statefile $state --port=$PORT --oneshot --debug | grep "New bid")
+	FOUNDBID=$(python3 createoffers.py --configfile $taker --statefile $state --port=$PORT --oneshot --debug | grep "New bid")
+	POSTOFFER=$(python3 -c "print($OB_AMOUNT < $OB_MIN)")
 	if [[ $FOUNDBID ]]; then
 		$grn"Placed bid successfully! Check BasicSwapDEX to confirm\n";$nc
-	elif [[ $OB_AMOUNT < $OB_MIN && -z $FOUNDBID ]]; then
-		echo -e "Checking for a matching offer"
-		echo -e "No matching offers found $red2:@ !!!$nc2\nBid quantity too$red2 low$nc2 to post to order book.\nTrying again in 30 seconds"
-		sleep 2
-		revert_config
-		sleep 28
-		apply_config
+	elif [[ $POSTOFFER == True ]] && [[ -z $FOUNDBID ]]; then
+		printf "Checking for a matching offer\n"
+		printf "No matching offers found $red2:@ !!!$nc2\nBid quantity too$red2 low$nc2 to post to order book.\nTrying again in 30 seconds\n"
+		sleep 30
 		$cy"Rechecking bids\n";$nc
 		recheck_bids
 	else
 		# Post as limit order on the book
 		$cy"No matching offers found. Posting to the orderbook\n";$nc
-		ORDERPLACED=$(python createoffers.py --configfile $maker --statefile $state --port=$PORT --oneshot | grep "New offer")
+		ORDERPLACED=$(python3 createoffers.py --configfile $maker --statefile $state --port=$PORT --oneshot | grep "New offer")
 		if [[ $ORDERPLACED ]]; then
-			revert_config
 			$grn"OFFER POSTED! Please check BasicSwapDEX to confirm\nOffer expires in 4hrs\n";$nc
 		else
-			revert_config
 			$red"Placing Order failed. Try again$nc2\n"
 		fi
 	fi
@ -328,8 +333,8 @@ recheck_bids() {
 	coin
 	coin_prompt_sell

-	echo -e "Buying: $grn2$theircapital$nc2"
-	echo -e "Selling: $red2$yourcapital$nc2"
+	printf "\nBuying: $grn2$theircapital$nc2"
+	printf "\nSelling: $red2$yourcapital$nc2\n"

 #2. Set rates
 # Pull Market rate
--- a/bsx/removecoin.sh
+++ b/bsx/removecoin.sh
@ -1,10 +1,10 @@
 #!/bin/bash

 ## Prompt for user input
-echo -e "\n\nThe following coins can be disabled (case sensitive)\nbitcoin\ndash\ndecred\nfiro\nlitecoin\nmonero\npivx\nwownero\n"
+printf "\n\nThe following coins can be disabled (case sensitive)\nbitcoin\ndash\ndecred\nfiro\nlitecoin\nmonero\npivx\nwownero\n\n"
 read -p 'Full name of coin to disable [example: wownero] ' disablecoin
 ## Confirm
-echo -e "\nDisable $disablecoin on your BasicSwap install, correct? Press any key to continue. CTRL-C to exit"
+printf "\nDisable $disablecoin on your BasicSwap install, correct? Press any key to continue. CTRL-C to exit\n"
 read
 ## Disable the coin
 basicswap-prepare --datadir=$SWAP_DATADIR --disablecoin=$disablecoin
--- a/bsx/setup.sh
+++ b/bsx/setup.sh
@ -1,34 +1,28 @@
 #!/bin/bash

 # Colors
-red="echo -e -n \e[31;1m"
-green="echo -e -n \e[32;1m"
-nocolor="echo -e -n \e[0m"
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"

 ## Clone basicswap git
 cd $SWAP_DATADIR
-git clone https://github.com/basicswap/basicswap
-cd $SWAP_DATADIR/basicswap
+if [[ -d basicswap ]]; then
+    cd $SWAP_DATADIR/basicswap
+    git pull || { $red"Failed to pull repo. Installation aborted"; exit; }
+else
+    git clone https://github.com/basicswap/basicswap || { $red"Failed to clone repo. Please run the installer again"; exit; }
+    cd $SWAP_DATADIR/basicswap
+fi

 ## Macos
 if [[ $MACOS ]]; then
-    $SWAP_DATADIR/venv/bin/pip install certifi
+    $SWAP_DATADIR/venv/bin/pip3 install certifi
 fi

 ## Install basicswap, coincurve, and pip dependencies
-$SWAP_DATADIR/venv/bin/pip install -r requirements.txt --require-hashes
-$SWAP_DATADIR/venv/bin/pip install .
-
-## Decide a source for Monero's restore height
-if [[ "$xmrrestoreheight" ]]; then
-	CURRENT_XMR_HEIGHT=$xmrrestoreheight
-elif [[ "$monerod_addr" ]]; then
-	# Use custom Monero node
-	CURRENT_XMR_HEIGHT=$(curl "http://$monerod_addr:$monerod_port/get_info" | jq .height)
-else
-	# Use public node
-	CURRENT_XMR_HEIGHT=$(curl http://node3.monerodevs.org:18089/get_info | jq .height)
-fi
+$SWAP_DATADIR/venv/bin/pip3 install -r requirements.txt --require-hashes
+$SWAP_DATADIR/venv/bin/pip3 install .

 # Use Tor if we want
 enable_tor() {
@ -42,25 +36,29 @@ if   [[ "$particl_mnemonic" && "$monerod_addr" ]]; then
 	# Restore seed
 	PARTICL_MNEMONIC=$particl_mnemonic
 	XMR_RPC_HOST=$monerod_addr XMR_RPC_PORT=$monerod_port \
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC"
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC" || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
 	enable_tor
 elif [[ "$particl_mnemonic" ]]; then
 	# Restore seed
 	PARTICL_MNEMONIC=$particl_mnemonic
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC"
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC" || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
 	enable_tor
 elif [[ "$monerod_addr" ]]; then
 	# Setup new install and use a remote monero node
 	XMR_RPC_HOST=$monerod_addr XMR_RPC_PORT=$monerod_port \
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
-	$red"\n\nMake note of your seed above\n"; $nocolor
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
+	$red"\n\nMake note of your seed above\n\n"; $nocolor
 	enable_tor
 else
 	# Setup new install using local nodes
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
-	$red"\n\nMake note of your seed above\n"; $nocolor
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
+	$red"\n\nMake note of your seed above\n\n"; $nocolor
 	enable_tor
 fi

-$green"Install complete.\n\nUse 'basicswap-bash' to run, 'bsx-update' to update, and 'bsx-addcoin' to add a coin\n\nYou'll need to open a new login shell (a new terminal window) for the start scripts to be recognized.\n";$nocolor
+$green"Install complete.\n\nUse 'basicswap-bash' to run, 'bsx-update' to update, and 'bsx-addcoin' to add a coin\n\n";$nocolor
 $red"You may have to logout / login or open a new terminal window for the commands to be detected\n";$nocolor
--- a/bsx/tails_setup.sh
+++ b/bsx/tails_setup.sh
@ -1,36 +1,29 @@
 #!/bin/bash

 # Colors
-red="echo -e -n \e[31;1m"
-green="echo -e -n \e[32;1m"
-nocolor="echo -e -n \e[0m"
-
-## Download & Install coincurve stuff
-cd $SWAP_DATADIR
-wget -O coincurve-anonswap.zip https://github.com/tecnovert/coincurve/archive/refs/tags/anonswap_v0.2.zip
-unzip -d coincurve-anonswap coincurve-anonswap.zip
-mv -f ./coincurve-anonswap/*/{.,}* ./coincurve-anonswap || true
-cd $SWAP_DATADIR/coincurve-anonswap
-torsocks $SWAP_DATADIR/venv/bin/pip install . # Tails requires torsocks for pip
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"

 ## Clone basicswap git
 cd $SWAP_DATADIR
-git clone https://github.com/tecnovert/basicswap -b wow
-cd $SWAP_DATADIR/basicswap
-## Install basicswap
-torsocks $SWAP_DATADIR/venv/bin/pip install . # Tails requires torsocks for pip
-
-## Decide a source for Monero's restore height
-if [[ "$xmrrestoreheight" ]]; then
-	CURRENT_XMR_HEIGHT=$xmrrestoreheight
-elif [[ "$monerod_addr" ]]; then
-	# Use custom Monero node
-	CURRENT_XMR_HEIGHT=$(curl "http://$monerod_addr:$monerod_port/get_info" | jq .height)
+if [[ -d basicswap ]]; then
+    cd $SWAP_DATADIR/basicswap
+    git pull || { $red"Failed to pull repo. Installation aborted"; exit; }
 else
-	# Use public node
-	CURRENT_XMR_HEIGHT=$(curl http://node3.monerodevs.org:18089/get_info | jq .height)
+    git clone https://github.com/basicswap/basicswap || { $red"Failed to clone repo. Please run the installer again"; exit; }
+    cd $SWAP_DATADIR/basicswap
 fi

+## Macos
+if [[ $MACOS ]]; then
+    $SWAP_DATADIR/venv/bin/pip3 install certifi
+fi
+
+## Install basicswap, coincurve, and pip dependencies
+torsocks $SWAP_DATADIR/venv/bin/pip3 install -r requirements.txt --require-hashes
+torsocks $SWAP_DATADIR/venv/bin/pip3 install .
+
 # Use Tor if we want
 enable_tor() {
 	if [[ "$tor_on" = 1 ]]; then
@ -42,32 +35,30 @@ enable_tor() {
 if   [[ "$particl_mnemonic" && "$monerod_addr" ]]; then
 	# Restore seed
 	PARTICL_MNEMONIC=$particl_mnemonic
-	basicswap-prepare --datadir=$SWAP_DATADIR --particl_mnemonic="$PARTICL_MNEMONIC"
-	# Add coins and use a remote monero node
-	XMR_RPC_HOST=$monerod_addr BASE_XMR_RPC_PORT=$monerod_port \
-	basicswap-prepare --datadir=$SWAP_DATADIR --addcoin=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
+	XMR_RPC_HOST=$monerod_addr XMR_RPC_PORT=$monerod_port \
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC" || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
 	enable_tor
-
 elif [[ "$particl_mnemonic" ]]; then
 	# Restore seed
 	PARTICL_MNEMONIC=$particl_mnemonic
-	basicswap-prepare --datadir=$SWAP_DATADIR --particl_mnemonic="$PARTICL_MNEMONIC"
-	# Add coins using local nodes
-	basicswap-prepare --datadir=$SWAP_DATADIR --addcoin=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC" || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
 	enable_tor
-
 elif [[ "$monerod_addr" ]]; then
 	# Setup new install and use a remote monero node
-	XMR_RPC_HOST=$monerod_addr BASE_XMR_RPC_PORT=$monerod_port \
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
-	$red"\n\nMake note of your seed above\n"; $nocolor
+	XMR_RPC_HOST=$monerod_addr XMR_RPC_PORT=$monerod_port \
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
+	$red"\n\nMake note of your seed above\n\n"; $nocolor
 	enable_tor
-
 else
 	# Setup new install using local nodes
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
-	$red"\n\nMake note of your seed above\n"; $nocolor
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$xmrrestoreheight --wowrestoreheight=600000 || { $red"Installation failed. Try again"; exit; }
+	$red"\n\nMonero wallet restore height is ${xmrrestoreheight}"; $nocolor
+	$red"\n\nMake note of your seed above\n\n"; $nocolor
 	enable_tor
 fi

-$green"Install complete.\n\nUse 'basicswap-bash' to run, 'bsx-update' to update, and 'bsx-addcoin' to add a coin\n"; $nocolor
+$green"Install complete.\n\nUse 'basicswap-bash' to run, 'bsx-update' to update, and 'bsx-addcoin' to add a coin\n\n";$nocolor
+$red"You may have to logout / login or open a new terminal window for the commands to be detected\n";$nocolor
--- a/bsx/update.sh
+++ b/bsx/update.sh
@ -16,8 +16,8 @@ fi

 #git checkout master
 git pull
-$SWAP_DATADIR/venv/bin/pip install -r requirements.txt --require-hashes
-$SWAP_DATADIR/venv/bin/pip install .
+$SWAP_DATADIR/venv/bin/pip3 install -r requirements.txt --require-hashes
+$SWAP_DATADIR/venv/bin/pip3 install .

 # Update Coin Cores
 $HOME/.local/bin/bsx/auto_coinupd8.sh
--- a/install.sh
+++ b/install.sh
@ -1,16 +1,41 @@
 #/bin/bash
+#set -x
 export SWAP_DATADIR=$HOME/coinswaps
+if [[ $USER == amnesia ]]; then
+    export SWAP_DATADIR=$HOME/Persistent/coinswaps
+fi

 # Colors
-red="echo -e -n \e[31;1m"
-green="echo -e -n \e[32;1m"
-nocolor="echo -e -n \e[0m"
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"
+
+# Check if bsx is already installedo
+chain=(particl monero wownero dash decred firo litecoin bitcoin bitcoincash pivx)
+for coin in "${chain[@]}"; do
+    if [[ -f "${SWAP_DATADIR}/${coin}/${coin}.conf" ]]; then
+        printf "Existing configuration file found at ${SWAP_DATADIR}/${coin}/${coin}.conf\n"
+        abort=1
+    fi
+    if [[ -f "${SWAP_DATADIR}/${coin}/${coin}d.conf" ]]; then
+        printf "Existing configuration file found at ${SWAP_DATADIR}/${coin}/${coin}d.conf\n"
+        abort=1
+    fi
+done
+if [[ -f "${SWAP_DATADIR}/basicswap.json" ]]; then
+    printf "Existing configuration file(s) found at ${SWAP_DATADIR}/basicswap.json.\n"
+    abort=1
+fi
+if [[ $abort ]]; then
+    $red"Aborting install\n"; $nocolor; exit
+fi
+

 # Check if basicswap is running
-if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
-    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
+if [[ -f ${SWAP_DATADIR}/particl/particl.pid ]]; then
+    bsx_pid=$(cat ${SWAP_DATADIR}/particl/particl.pid)
    if [[ $bsx_pid ]]; then
-        bsx_run=$(pidof particld | grep $bsx_pid)
+        bsx_run=$(pgrep particld | grep $bsx_pid)
        if [[ $bsx_run ]]; then
            $red"\nError: BasicSwapDEX is already installed.\n"; $nocolor
            exit
@ -24,9 +49,9 @@ title="BasicSwapDEX Installer"
 COLUMNS=$(tput cols)
 title_size=${#title}
 span=$(((COLUMNS + title_size) / 2))
-printf "%${COLUMNS}s" " " | tr " " "*"
+printf "%${COLUMNS}s" " " | tr " " "#"
 printf "%${span}s\n" "$title"
-printf "%${COLUMNS}s" " " | tr " " "*"
+printf "%${COLUMNS}s" " " | tr " " "#"
 $nocolor

 # Detect Operating system
@ -36,37 +61,19 @@ DEPENDENCY=""
 TAILS=""

 check_tails() {
-	if [ $USER == amnesia ]; then
-	    $green"\nDetected Tails\n";$nocolor
+	if [[ $USER == amnesia ]]; then
+	    $green"\n\nDetected Tails";$nocolor
 	    TAILS=1
 	else
-	    $green"\nDetected Debian\n";$nocolor
+	    $green"\n\nDetected Debian";$nocolor
 	fi
 }

 detect_os_arch() {
-    if type -P apt > /dev/null; then
-	check_tails
-        # Debian / Ubuntu / Mint
-        INSTALL="sudo apt install"
-        UPDATE="sudo apt update"
-        DEPENDENCY="python3-pip python3-venv gnupg pkg-config"
-    elif type -P dnf > /dev/null; then
-        # Fedora
-        INSTALL="sudo dnf install"
-        UPDATE="sudo dnf check-update"
-        DEPENDENCY="python3-virtualenv python3-pip python3-devel gnupg2 pkgconf"
-	$green"\nDetected Fedora\n";$nocolor
-    elif type -P pacman > /dev/null; then
-        # Arch Linux
-        INSTALL="sudo pacman -S"
-        UPDATE="sudo pacman -Syu"
-        DEPENDENCY="python-pipenv gnupg pkgconf base-devel"
-	$green"\nDetected Arch Linux\n";$nocolor
-    elif [[ $(uname -s) = "Darwin" ]]; then
+    if [[ $(uname -s) = "Darwin" ]]; then
 	# MacOS
 	export MACOS=1
-	if type -P brew > /dev/null; then
+	if type -p brew > /dev/null; then
 	    $green"Homebrew is installed\n";$nc
 	    INSTALL="brew install"
 	else
@ -74,9 +81,33 @@ detect_os_arch() {
 	    INSTALL="curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh | /bin/bash && brew install"
 	fi
        DEPENDENCY="python gnupg pkg-config"
-	$green"\nDetected MacOS\n";$nocolor
+	$green"\n\nDetected MacOS";$nocolor
+    elif type -p apt > /dev/null; then
+	check_tails
+        # Debian / Ubuntu / Mint
+        INSTALL="sudo apt install"
+        UPDATE="sudo apt update"
+        DEPENDENCY="python3-pip python3-venv gnupg pkg-config"
+    elif type -p dnf > /dev/null; then
+        # Fedora
+        INSTALL="sudo dnf install"
+        UPDATE="sudo dnf check-update"
+        DEPENDENCY="python3-virtualenv python3-pip python3-devel gnupg2 pkgconf"
+	$green"\n\nDetected Fedora";$nocolor
+    elif type -p pacman > /dev/null; then
+        # Arch Linux
+        INSTALL="sudo pacman -S"
+        UPDATE="sudo pacman -Syu"
+        DEPENDENCY="curl python-pipenv gnupg pkgconf base-devel"
+	$green"\n\nDetected Arch Linux";$nocolor
+    elif type -P apk > /dev/null; then
+        # Alpine Linux
+        INSTALL="sudo apk add"
+        UPDATE="sudo apk update"
+        DEPENDENCY="py3-virtualenv python3-dev gnupg gcc musl-dev"
+	$green"\nDetected Alpine Linux";$nocolor
    else
-        $red"Failed to detect OS. Unsupported or unknown distribution.\nInstall Failed.";$nocolor
+        $red"\nFailed to detect OS. Unsupported or unknown distribution.\nInstall Failed.\n";$nocolor
 	exit
    fi
 }
@ -84,21 +115,21 @@ detect_os_arch() {
 detect_os_arch

 ## Update & Install dependencies
-echo -e "\n\nInstalling dependencies\nPress CTRL-C at password prompt(s) to skip. If skipped, you must install the dependencies manually before proceeding"
+printf "\n\nInstalling dependencies\nPress CTRL-C at password prompt(s) to skip. If skipped, you must install the dependencies manually before proceeding\n\n"
 $green"$UPDATE\n$INSTALL $DEPENDENCY curl automake libtool jq\n"; $nocolor
 $UPDATE
-$INSTALL $DEPENDENCY curl automake libtool jq
+$INSTALL $DEPENDENCY automake libtool jq

 # Enable tor
-echo -e "\n\n[1] Tor ON (requires sudo)\n[2] Tor OFF\n"
+printf "\n[1] Tor ON (requires sudo)\n[2] Tor OFF\n"
 until [[ "$tor_on" =~ ^[12]$ ]]; do
-read -p 'Select an option: [1|2] ' tor_on
+read -p 'Select an option: [1|2]: ' tor_on
 	case $tor_on in
 		1)
-		$green"\nBasicSwapDEX will use Tor";$nocolor
+		$green"BasicSwapDEX will use Tor\n";$nocolor
 		;;
 		2)
-		$red"\nBasicSwapDEX will NOT use Tor";$nocolor
+		$red"BasicSwapDEX will NOT use Tor\n";$nocolor
 		;;
 		*)
 		$red"You must answer 1 or 2\n";$nocolor
@ -107,22 +138,22 @@ read -p 'Select an option: [1|2] ' tor_on
 done

 ## Particl restore Seed
-echo -e "\n\n[1] New Install (default)\n[2] Restore from Particl Seed\n"
+printf "\n[1] New Install (default)\n[2] Restore from Particl Seed\n"
 until [[ "$restore" =~ ^[12]$ ]]; do
-read -p 'Select an option: [1|2] ' restore
+read -p 'Select an option: [1|2]: ' restore
 	case $restore in
 		1)
-		$green"\nInstalling BasicSwapDEX\n"; $nocolor
+		$green"Installing BasicSwapDEX\n"; $nocolor
 		;;
 		2)
 		until [[ "$wordcount" = "24" ]]; do
 		read -p $'\nEnter your Particl Seed\n[example: word word word word word...] ' particl_mnemonic
 		wordcount=$(echo $particl_mnemonic | wc -w)
 			if  [[ $wordcount = 24 ]]; then
-				echo -e "Restoring BasicSwapDEX"
+				printf "Restoring BasicSwapDEX\n"
 				$green"$particl_mnemonic\n";$nocolor
 			else
-				$red"Try again. Seed must be 24 words"; $nocolor
+				$red"Try again. Seed must be 24 words\n"; $nocolor
 			fi
 		done
 		;;
@ -137,13 +168,13 @@ if [[ $particl_mnemonic ]]; then
 	read -p $'\nEnter a restore height for your BasicSwap XMR wallet? [Y/n] ' height
 	case $height in
 		n|N)
-		$red"\nNot using a custom XMR Restore height";$nocolor
+		$red"Not using a custom XMR Restore height\n";$nocolor
 		;;
 		*)
 		until [[ "$xmrrestoreheight" =~ ^[0-9]{1,7}$ ]]; do
 		read -p $'Enter your Monero Restore Height [example: 2548568] ' xmrrestoreheight
 			if  [[ $xmrrestoreheight =~ ^[0-9]{7}$ ]]; then
-				$green"\nYour XMR Restore height: $xmrrestoreheight"; $nocolor
+				$green"Your XMR Restore height: $xmrrestoreheight\n"; $nocolor
 			else
 				$red"Try again. Must be 1-7 digits\n"; $nocolor
 			fi
@ -153,7 +184,7 @@ if [[ $particl_mnemonic ]]; then
 fi

 ## Configure Monero
-echo -e "\n[1] Connect to a Monero node\n[2] Allow BasicSwapDEX to run a Monero node (+70GB)\n"
+printf "\n[1] Connect to a Monero node\n[2] Allow BasicSwapDEX to run a Monero node (+70GB)\n"
 until [[ "$l" =~ ^[12]$ ]]; do
 read -p 'Select an option [1|2]: ' l
 	case $l in
@ -161,16 +192,23 @@ read -p 'Select an option [1|2]: ' l
 		until [[ $checknode ]]; do
 			read -p 'Enter Address of Monero node [example: 192.168.1.123] ' monerod_addr
 			read -p 'Enter RPC Port for the Monero node [example: 18081] ' monerod_port
-			checknode=$(curl -sk http://$monerod_addr:$monerod_port/get_info)
+			checknode=$(curl -sk http://$monerod_addr:$monerod_port/get_info | jq .height)
 			if [[ $checknode ]]; then
-				$green"\nSuccessfully connected to the XMR node @ $monerod_addr:$monerod_port"; $nocolor
+				$green"Successfully connected to the XMR node @ $monerod_addr:$monerod_port\n"; $nocolor
 			else
-				$red"\nThe node at $monerod_addr:$monerod_port is not accessible. Try again\n\n"; $nocolor
+				$red"The node at $monerod_addr:$monerod_port is not accessible. Try again\n"; $nocolor
 			fi
+
 		done
+		if [[ -z $xmrrestoreheight ]]; then
+			xmrrestoreheight="${checknode}"
+		fi
+			$green"Monero wallet Restore Height set to ${xmrrestoreheight}\n"; $nocolor
 		;;
 		2)
-		$green"\nBasicSwapDEX will run the Monero node for you."; $nocolor
+		xmrrestoreheight=$(curl -s http://node3.monerodevs.org:18089/get_info | jq .height || { echo "Failed to get Monero blockchain height. Please run the installer again."; exit; })
+		$green"BasicSwapDEX will run the Monero node for you.\n"; $nocolor
+		$green"Monero wallet Restore Height set to ${xmrrestoreheight}\n"; $nocolor
 		;;
 		*)
 		$red"You must answer 1 or 2\n"; $nocolor
@ -179,7 +217,7 @@ read -p 'Select an option [1|2]: ' l
 done

 ## Begin Install
-echo -e "\n\nInstalling BasicSwapDEX"
+printf "\nInstalling BasicSwapDEX\n"
 read -p 'Press Enter to continue, or CTRL-C to exit.'

 # Quest to make trasher happy
@ -211,15 +249,15 @@ fi
 if [[ -d $HOME/.local/bin/bsx ]]; then
    rm -r $HOME/.local/bin/bsx* $HOME/.local/bin/basicswap-bash
 fi
-mv -f -t $HOME/.local/bin/ basicswap-bash bsx*
+cp -r basicswap-bash bsx* $HOME/.local/bin/

 ## Make venv and set variables for install
-export monerod_addr=$monerod_addr
-export monerod_port=$monerod_port
-export particl_mnemonic=$particl_mnemonic
-export xmrrestoreheight=$xmrrestoreheight
-export tor_on=$tor_on
-export TAILS=$TAILS
-python3 -m venv "$SWAP_DATADIR/venv"
+export monerod_addr="${monerod_addr}"
+export monerod_port="${monerod_port}"
+export particl_mnemonic="${particl_mnemonic}"
+export xmrrestoreheight="${xmrrestoreheight}"
+export tor_on="${tor_on}"
+export TAILS="${TAILS}"
+python3 -m venv "${SWAP_DATADIR}/venv"
 ## Activate venv
 $HOME/.local/bin/bsx/activate_venv.sh
Author	SHA1	Message	Date
nahuhh	8c50076b09	later	2024-11-11 15:54:25 +00:00
nahuhh	c163ac2ce4	placeorders: use python to check offer size	2024-11-10 14:52:21 +00:00
nahuhh	98da79699c	tails: persistent datadir	2024-11-09 20:55:47 +00:00
nahuhh	fc7e543162	base: add error checking	2024-11-09 20:55:40 +00:00
nahuhh	c319bcfcd3	tails: basicswap-prepare	2024-11-09 04:38:18 +00:00
nahuhh	e7e55e74ed	placeorders: printf and small changes	2024-11-09 03:11:48 +00:00
nahuhh	b25aecc6b9	mac: bad zsh formatting and colors	2024-11-09 03:03:53 +00:00
nahuhh	dacdee2570	placeorder: python3	2024-11-08 21:49:42 +00:00
nahuhh	e2a574cf9b	install: mac/zsh doesn't like cp -t	2024-11-07 17:48:57 +00:00
nahuhh	4b7cbe98b4	install: fix mac detection	2024-11-07 17:08:42 +00:00
nahuhh	b0a83f63a3	autoupd8: use for loop	2024-10-19 11:16:05 +00:00
nahuhh	82fd60cd3c	setup: update tails	2024-10-18 23:15:52 +00:00
nahuhh	e9eee1c826	install: cp scripts	2024-10-18 23:15:00 +00:00