tails: basicswap-prepare

README.md

@@ -1,16 +1,33 @@
 # basicswap-bash
-A BasicSwapDEX bash installer for Debian/Ubuntu
+A suite of bash scripts to install and manage
+BasicSwapDEX on Windows(WSL)/Debian/Ubuntu/Arch/Fedora
 
-### Installation
+### New Installation
 ```bash
-wget https://github.com/nahuhh/basicswap-bash/releases/latest/download/basicswap-bash.tar.gz
-tar xvf basicswap-bash.tar.gz
+git clone https://github.com/nahuhh/basicswap-bash
 cd basicswap-bash && ./install.sh
+cd .. && rm -rf basicswap-bash
 ```
+### Update scripts from older versions
+``` bash
+cd ~/coinswaps/basicswap
+git clone https://github.com/nahuhh/basicswap-bash
+cd basicswap-bash
+mkdir -p $HOME/.local/bin
+rm -r $HOME/.local/bin/bsx
+mv -f basic* bsx* $HOME/.local/bin/
+cd .. && rm -rf basicswap-bash
+bsx-update
+```
+
 ### Running BasicSwapDEX
 ```
 basicswap-bash
 ```
+#### Update BSX core and Coin cores
+```
+bsx-update
+```
 
 #### Enable/Disable Tor [post install]
 ```
@@ -20,19 +37,19 @@ bsx-enabletor
 bsx-disabletor
 ```
 
-#### Add coins
+#### Add/remove coins
 ```
 bsx-addcoin
 ```
-#### Update blockchains
 ```
-bsx-upgrade-coins
-```
-#### Update BSX core
-```
-bsx-update
+bsx-removecoin
 ```
 
+### BONUS placeorders
+This is a POC for placing new orders. YMMV
+```
+bsx-placeorder
+```
 
 A small donation goes a long way. Thanks
 - ofrnxmr

basicswap-bash

@@ -1,5 +1,21 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
-python3 -m venv "$SWAP_DATADIR/venv"
-. $SWAP_DATADIR/venv/bin/activate && python -V
-/usr/local/bin/bsx/startup.sh
+
+# Colors
+red="echo -e -n \e[31;1m"
+green="echo -e -n \e[32;1m"
+nocolor="echo -e -n \e[0m"
+
+if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
+    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
+    if [[ $bsx_pid ]]; then
+        bsx_run=$(pidof particld | grep $bsx_pid)
+        if [[ $bsx_run ]]; then
+            $red"\nError: BasicSwapDEX is already running.\n"; $nocolor
+            exit
+        fi
+    fi
+fi
+
+. $SWAP_DATADIR/venv/bin/activate
+$HOME/.local/bin/bsx/startup.sh

bsx-addcoin

@@ -1,4 +1,46 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
-. $SWAP_DATADIR/venv/bin/activate && python -V
-/usr/local/bin/bsx/addcoin.sh
+
+# Colors
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"
+
+# Check if basicswap is running
+if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
+    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
+    if [[ $bsx_pid ]]; then
+        bsx_run=$(pgrep particld | grep $bsx_pid)
+        if [[ $bsx_run ]]; then
+            $red"\nError: BasicSwapDEX is running.\n"; $nocolor
+            exit
+        fi
+    fi
+fi
+
+printf "BasicSwapDEX is currently:\n[1] Password protected\n[2] NOT password protected\n\n"
+until [[ "$l" =~ ^[12]$ ]]; do
+read -p 'Select an option [1|2]: ' l
+	case $l in
+		1)
+		until [[ $pass1 ]] && [[ $pass1 == $pass2 ]]; do
+			read -sp 'Enter your BasicSwap password: ' pass1
+			read -sp $'\nRe-enter your BasicSwap password: ' pass2
+			if [[ $pass1 == $pass2 ]]; then
+				export WALLET_ENCRYPTION_PWD=$pass1
+			else
+				$red"\nThe passwords entered don't match. Try again\n\n"; $nocolor
+			fi
+                done
+                ;;
+                2)
+                $nocolor"\nProceeding without a password\n"
+                ;;
+                *)
+                $red"You must answer 1 or 2\n"; $nocolor
+                ;;
+        esac
+done
+
+. $SWAP_DATADIR/venv/bin/activate
+$HOME/.local/bin/bsx/addcoin.sh

bsx-disabletor

@@ -1,4 +1,46 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
-. $SWAP_DATADIR/venv/bin/activate && python -V
-/usr/local/bin/bsx/disabletor.sh
+
+# Colors
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"
+
+# Check if basicswap is running
+if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
+    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
+    if [[ $bsx_pid ]]; then
+        bsx_run=$(pgrep particld | grep $bsx_pid)
+        if [[ $bsx_run ]]; then
+            $red"\nError: BasicSwapDEX is running.\n"; $nocolor
+            exit
+        fi
+    fi
+fi
+
+printf "BasicSwapDEX is currently:\n[1] Password protected\n[2] NOT password protected\n\n"
+until [[ "$l" =~ ^[12]$ ]]; do
+read -p 'Select an option [1|2]: ' l
+        case $l in
+                1)
+                until [[ $pass1 ]] && [[ $pass1 == $pass2 ]]; do
+                        read -sp 'Enter your BasicSwap password: ' pass1
+                        read -sp $'\nRe-enter your BasicSwap password: ' pass2
+                        if [[ $pass1 == $pass2 ]]; then
+                                export WALLET_ENCRYPTION_PWD=$pass1
+                        else
+                                $red"\nThe passwords entered don't match. Try again\n\n"; $nocolor
+                        fi
+                done
+                ;;
+                2)
+                $nocolor"\nProceeding without a password\n"
+                ;;
+                *)
+                $red"You must answer 1 or 2\n"; $nocolor
+                ;;
+        esac
+done
+
+. $SWAP_DATADIR/venv/bin/activate
+$HOME/.local/bin/bsx/disabletor.sh

bsx-enabletor

@@ -1,4 +1,46 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
-. $SWAP_DATADIR/venv/bin/activate && python -V
-/usr/local/bin/bsx/enabletor.sh
+
+# Colors
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"
+
+# Check if basicswap is running
+if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
+    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
+    if [[ $bsx_pid ]]; then
+        bsx_run=$(pgrep particld | grep $bsx_pid)
+        if [[ $bsx_run ]]; then
+            $red"\nError: BasicSwapDEX is running.\n"; $nocolor
+            exit
+        fi
+    fi
+fi
+
+printf "BasicSwapDEX is currently:\n[1] Password protected\n[2] NOT password protected\n\n"
+until [[ "$l" =~ ^[12]$ ]]; do
+read -p 'Select an option [1|2]: ' l
+        case $l in
+                1)
+                until [[ $pass1 ]] && [[ $pass1 == $pass2 ]]; do
+                        read -sp 'Enter your BasicSwap password: ' pass1
+                        read -sp $'\nRe-enter your BasicSwap password: ' pass2
+                        if [[ $pass1 == $pass2 ]]; then
+                                export WALLET_ENCRYPTION_PWD=$pass1
+                        else
+                                $red"\nThe passwords entered don't match. Try again\n\n"; $nocolor
+                        fi
+                done
+                ;;
+                2)
+                $nocolor"\nProceeding without a password\n"
+                ;;
+                *)
+                $red"You must answer 1 or 2\n"; $nocolor
+                ;;
+        esac
+done
+
+. $SWAP_DATADIR/venv/bin/activate
+$HOME/.local/bin/bsx/enabletor.sh

bsx-placeorder

@@ -0,0 +1,25 @@
+#!/bin/bash
+export SWAP_DATADIR=$HOME/coinswaps
+
+# Colors
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"
+
+# Check if basicswap is running
+if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
+    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
+    bsx_run=$(pgrep particld | grep $bsx_pid)
+    if ! [[ $bsx_run ]]; then
+        $red"\nError: BasicSwapDEX must be running.\n"; $nocolor
+        exit
+    fi
+else
+    $red"\nError: BasicSwapDEX must be running.\n"; $nocolor
+    exit
+fi
+
+cp $HOME/.local/bin/bsx/placeorders/* $SWAP_DATADIR/basicswap/scripts/.
+cd $SWAP_DATADIR/basicswap/scripts/
+
+./placeorders.sh

bsx-removecoin

@@ -1,4 +1,46 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
-. $SWAP_DATADIR/venv/bin/activate && python -V
-/usr/local/bin/bsx/disablecoin.sh
+
+# Colors
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"
+
+# Check if basicswap is running
+if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
+    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
+    if [[ $bsx_pid ]]; then
+        bsx_run=$(pgrep particld | grep $bsx_pid)
+        if [[ $bsx_run ]]; then
+            $red"\nError: BasicSwapDEX is running.\n"; $nocolor
+            exit
+        fi
+    fi
+fi
+
+printf "BasicSwapDEX is currently:\n[1] Password protected\n[2] NOT password protected\n\n"
+until [[ "$l" =~ ^[12]$ ]]; do
+read -p 'Select an option [1|2]: ' l
+        case $l in
+                1)
+                until [[ $pass1 ]] && [[ $pass1 == $pass2 ]]; do
+                        read -sp 'Enter your BasicSwap password: ' pass1
+                        read -sp $'\nRe-enter your BasicSwap password: ' pass2
+                        if [[ $pass1 == $pass2 ]]; then
+                                export WALLET_ENCRYPTION_PWD=$pass1
+                        else
+                                $red"\nThe passwords entered don't match. Try again\n\n"; $nocolor
+                        fi
+                done
+                ;;
+                2)
+                $nocolor"\nProceeding without a password\n"
+                ;;
+                *)
+                $red"You must answer 1 or 2\n"; $nocolor
+                ;;
+        esac
+done
+
+. $SWAP_DATADIR/venv/bin/activate
+$HOME/.local/bin/bsx/removecoin.sh

bsx-update

@@ -1,4 +1,44 @@
 #!/bin/bash
 export SWAP_DATADIR=$HOME/coinswaps
-. $SWAP_DATADIR/venv/bin/activate && python -V
-/usr/local/bin/bsx/update.sh
+
+# Colors
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"
+
+# Check if basicswap is running
+if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
+    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
+    if [[ $bsx_pid ]]; then
+        bsx_run=$(pgrep particld | grep $bsx_pid)
+        if [[ $bsx_run ]]; then
+            $red"\nError: BasicSwapDEX is running.\n"; $nocolor
+            exit
+        fi
+    fi
+fi
+
+. $SWAP_DATADIR/venv/bin/activate
+
+if [ -f /usr/local/bin/bsx/update.sh ]; then
+	/usr/local/bin/bsx/update.sh
+	cd /usr/local/bin
+	sudo rm -rf basicswap-bash bsx*
+else
+	cd $SWAP_DATADIR/basicswap
+
+	# Download updated scripts
+	echo "Updating basicswap-bash scripts" && sleep 1
+	git clone https://github.com/nahuhh/basicswap-bash
+	cd basicswap-bash
+
+	# Move scripts
+	rm -rf $HOME/.local/bin/bsx
+	mv -f basic* bsx* $HOME/.local/bin/
+
+	# Copy core_versions to basicswap folder
+	mv core_versions $SWAP_DATADIR/basicswap/core_versions
+
+	# Update BasicSwap, coincurve and coin cores
+	$HOME/.local/bin/bsx/update.sh
+fi

bsx-upgrade-coins

@@ -1,4 +0,0 @@
-#!/bin/bash
-export SWAP_DATADIR=$HOME/coinswaps
-. $SWAP_DATADIR/venv/bin/activate && python -V
-/usr/local/bin/bsx/upgradecoins.sh

bsx/activate_venv.sh

@@ -1,3 +1,7 @@
 #!/bin/bash
-. $SWAP_DATADIR/venv/bin/activate && python -V
-/usr/local/bin/bsx/setup.sh
+. $SWAP_DATADIR/venv/bin/activate
+if [[ $TAILS ]]; then
+$HOME/.local/bin/bsx/tails_setup.sh
+else
+$HOME/.local/bin/bsx/setup.sh
+fi

bsx/addcoin.sh

@@ -1,11 +1,11 @@
 #!/bin/bash
 
 ## Prompt for user input
-echo -e "\n\nThe following coins can be added (case sensitive)\nbitcoin\ndash\nfiro\nlitecoin\npivx\n"
+printf "\n\nThe following coins can be added (case sensitive)\nbitcoin\ndash\ndecred\nfiro\nlitecoin\npivx\nwownero\n\n"
 read -p 'Full name of coin to add [example: litecoin] ' addcoin
 ## Confirm
-echo -e "\nAdd $addcoin to your BasicSwap install, correct? Press any key to continue. CTRL-C to exit"
-read
+read -p $'\nAdd '$addcoin' to your BasicSwap install, correct? Press ENTER to continue. CTRL-C to exit'
+
 ## Add the coin
 if [ $addcoin = bitcoin ]; then
 	read -p 'Use --usebtcfastsync for bitcoin? [Y/n] ' btcfastsync

bsx/auto_coinupd8.sh

@@ -0,0 +1,43 @@
+#!/bin/bash
+#set -x
+SWAP_DATADIR=$HOME/coinswaps
+BINDIR=$SWAP_DATADIR/bin
+
+echo "Checking for Coin updates" && sleep 1
+
+chain=(
+bitcoin
+dash
+decred
+firo
+litecoin
+particl
+pivx
+monero
+wownero
+)
+
+list=""
+select=""
+for coin in "${chain[@]}"; do
+  if [[ -d $BINDIR/$coin ]]; then
+    if [[ $coin == decred ]]; then
+      UPDATE=$($BINDIR/$coin/dcrd --version | head -n 1 | grep -Fxf $SWAP_DATADIR/basicswap/core_versions)
+    else
+      UPDATE=$($BINDIR/$coin/"$coin"d --version | head -n 1 | grep -Fxf $SWAP_DATADIR/basicswap/core_versions)
+    fi
+    if [[ -z $UPDATE ]]; then
+      select+="$coin,"
+      list=${select%,}
+    fi
+  fi
+done
+
+echo "Updating $list"
+
+if [[ -n $select ]]; then
+  . $SWAP_DATADIR/venv/bin/activate
+  basicswap-prepare --datadir=$SWAP_DATADIR --preparebinonly --withcoins=$list
+else
+  echo "Coin Cores are up to date"
+fi

bsx/enabletor.sh

@@ -1,36 +1,58 @@
 #!/bin/bash
 
 # Colors
-red="echo -e -n \e[31;1m"
-green="echo -e -n \e[32;1m"
-nocolor="echo -e -n \e[0m"
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"
 
 # Detect Operating system
 INSTALL=""
 UPDATE=""
-INIT_TOR="sudo systemctl restart tor"
+INIT_TOR=""
+SYSTEMD_TOR="sudo systemctl restart tor"
+
+check_tails() {
+        if [[ $USER == amnesia ]]; then
+            $green"\n\nDetected Tails";$nocolor
+            TAILS=1
+        else
+            $green"\n\nDetected Debian";$nocolor
+        fi
+}
+
 detect_os_arch() {
-    if type -P apt > /dev/null; then
+    if [[ $(uname -s) = "Darwin" ]]; then
+        # MacOS
+        export MACOS=1
+        if type -p brew > /dev/null; then
+            $green"Homebrew is installed\n";$nc
+            INSTALL="brew install"
+        else
+            $green"Installing Homebrew\n";$nc
+            INSTALL="curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh | /bin/bash && brew install"
+        fi
+	INIT_TOR="pkill tor && tor"
+        $green"\n\nDetected MacOS";$nocolor
+    elif type -p apt > /dev/null; then
+        check_tails
         # Debian / Ubuntu / Mint
-        INSTALL="sudo apt install -y"
+        INSTALL="sudo apt install"
         UPDATE="sudo apt update"
-        $green"\nDetected Debian\n";$nocolor
-    elif type -P dnf > /dev/null; then
+	INIT_TOR=$SYSTEMD_TOR
+    elif type -p dnf > /dev/null; then
         # Fedora
-        INSTALL="sudo dnf install -y"
+        INSTALL="sudo dnf install"
         UPDATE="sudo dnf check-update"
-        $green"\nDetected Fedora\n";$nocolor
-    elif type -P pacman > /dev/null; then
+	INIT_TOR=$SYSTEMD_TOR
+        $green"\n\nDetected Fedora";$nocolor
+    elif type -p pacman > /dev/null; then
         # Arch Linux
         INSTALL="sudo pacman -S"
         UPDATE="sudo pacman -Syu"
-        $green"\nDetected Arch Linux\n";$nocolor
-    elif type -P brew > /dev/null; then
-        # MacOS
-        INSTALL="brew install"
-        $green"\nDetected MacOS\n";$nocolor
+	INIT_TOR=$SYSTEMD_TOR
+        $green"\n\nDetected Arch Linux";$nocolor
     else
-        $red"Failed to detect OS. Unsupported or unknown distribution.\nInstall Failed.";$nocolor
+        $red"\nFailed to detect OS. Unsupported or unknown distribution.\nInstall Failed.\n";$nocolor
         exit
     fi
 }
@@ -38,8 +60,8 @@ detect_os_arch() {
 detect_os_arch
 
 # Check for Tor installation
-if type -P tor > /dev/null; then
-	echo -e "\nTor is already installed :)"
+if type -p tor > /dev/null; then
+	printf "\nTor is already installed :)\n"
 else
 	# Install and configure tor
 	echo "Installing Tor..."
@@ -47,18 +69,19 @@ else
 	$INSTALL tor
 fi
 
-# Create HashesControlPassword
-echo -e "In the next step you'll choose a password. NOTE: It will be saved in PLAIN TEXT."
+# Create HashedControlPassword
+printf "In the next step you'll choose a password. NOTE: It will be saved in PLAIN TEXT.\n"
 read -p "Enter a (new) tor control password [example: 123123] " torcontrolpass
 # Edit /etc/tor/torrc
 torhashedpass=$(tor --hash-password $torcontrolpass)
 enabledcontrol=$(echo "ControlPort 9051")
-skipcontrol=$(grep -x "$enabledcontrol" /etc/tor/torrc)
+skipcontrol=$(sudo grep -x "$enabledcontrol" /etc/tor/torrc)
+echo "Check torrc for enabled ControlPort"
 if [[ $skipcontrol ]]; then
 	# Use Existing enabled ControlPort and append HashedControlPassword
-	echo -e "# Added by basicswap-bash\nHashedControlPassword $torhashedpass" | sudo tee -a /etc/tor/torrc
+	printf "# Added by basicswap-bash\nHashedControlPassword $torhashedpass\n" | sudo tee -a /etc/tor/torrc
 else
-	echo -e "# Added by basicswap-bash\n$enabledcontrol\nHashedControlPassword $torhashedpass" | sudo tee -a /etc/tor/torrc
+	printf "# Added by basicswap-bash\n$enabledcontrol\nHashedControlPassword $torhashedpass\n" | sudo tee -a /etc/tor/torrc
 fi
 
 # Restart tor to apply

bsx/placeorders/placebid.json.template

@@ -0,0 +1,25 @@
+{
+    "offers": [],
+    "bids": [
+        {
+            "coin_from": "COIN_TO_BUY",
+            "coin_to": "COIN_TO_SELL",
+            "amount": AMOUNT,
+            "maxrate": RATE,
+            "address": "-1",
+            "min_swap_amount": MIN_SWAP,
+            "max_coin_from_balance": -1,
+            "min_coin_to_balance": 0,
+            "max_concurrent": MAXBIDS,
+            "name": "GUI Bid"
+        }
+    ],
+    "stealthex": [],
+    "min_seconds_between_offers": 5,
+    "max_seconds_between_offers": 5,
+    "min_seconds_between_bids": 10,
+    "max_seconds_between_bids": 10,
+    "num_enabled_offers": 0,
+    "num_enabled_bids": 1,
+    "num_enabled_swaps": 0
+}

bsx/placeorders/placeoffer.json.template

@@ -0,0 +1,28 @@
+{
+    "offers": [
+        {
+            "enabled": true,
+            "coin_from": "COIN_TO_SELL",
+            "coin_to": "COIN_TO_BUY",
+            "amount": AMOUNT,
+            "amount_step": INCREMENT,
+            "minrate": RATE,
+            "ratetweakpercent": PERCENT,
+            "amount_variable": true,
+            "address": "-1",
+            "name": "GUI Offer",
+            "min_coin_from_amt": -1,
+            "min_swap_amount": MIN_SWAP,
+            "offer_valid_seconds": 14400
+        }
+    ],
+    "bids": [],
+    "stealthex": [],
+    "min_seconds_between_offers": 10,
+    "max_seconds_between_offers": 10,
+    "min_seconds_between_bids": 10,
+    "max_seconds_between_bids": 10,
+    "num_enabled_offers": 1,
+    "num_enabled_bids": 0,
+    "num_enabled_swaps": 0
+}

bsx/placeorders/placeorders.sh

@@ -0,0 +1,346 @@
+#!/bin/bash
+############################
+###########################
+#set -x
+PORT=12700 # BasicSwapDex http port
+
+# config file location
+taker=placebid.json
+maker=placeoffer.json
+state=placeorders_state.json
+
+# Defaults
+ALLOW_SPLIT_ORDERS=true # Sane default TODO
+MAXBIDS=10 # TODO
+PERCENT=2.5 # Max slippage for "Market" order types
+
+# FUNC - dont touch
+BUYORSELL=""
+AMOUNT=""
+TAKER_RATE=""
+MAKER_RATE=""
+OB_MIN=""
+MIN_MAKER=""
+MIN_TAKER=""
+###########################
+############################
+
+# Colors
+cy="printf \e[36;1m"
+cy2="\e[36;1m"
+red="printf \e[31;1m"
+red2="\e[31;1m"
+grn="printf \e[32;1m"
+grn2="\e[32;1m"
+nc="printf \e[0m"
+nc2="\e[0m"
+
+# Choose Coins
+coin_prompt_buy() {
+	THEIR_COIN=$COIN
+	theircoin=$coinsymbol
+	theircapital=$coinname
+}
+coin_prompt_sell() {
+	YOUR_COIN=$COIN
+	yourcoin=$coinsymbol
+	yourcapital=$coinname
+}
+coin() {
+	coin=""
+	printf "\n[1] Bitcoin\n[2] Monero\n[3] Litecoin\n[4] Firo\n[5] Dash\n[6] Decred\n[7] PIVX\n[8] Particl\n[9] Wownero\n\n"
+	until [[ $coin =~ ^[1-9]$ ]]; do
+		read -p 'Select an option: ' coin
+		case $coin in
+			1) COIN="bitcoin"
+			   coinname="Bitcoin"
+			   coinsymbol="BTC"
+			;;
+			2) COIN="monero"
+			   coinname="Monero"
+			   coinsymbol="XMR"
+			;;
+			3) COIN="litecoin"
+			   coinname="Litecoin"
+			   coinsymbol="LTC"
+			;;
+			4) COIN="zcoin"
+			   coinname="Firo"
+			   coinsymbol="FIRO"
+			;;
+			5) COIN="dash"
+			   coinname="Dash"
+			   coinsymbol="DASH"
+			;;
+			6) COIN="dcr"
+			   coinname="Decred"
+			   coinsymbol="DCR"
+			;;
+			7) COIN="pivx"
+			   coinname="PIVX"
+			   coinsymbol="PIVX"
+			;;
+			8) COIN="particl"
+			   coinname="Particl"
+			   coinsymbol="PART"
+			;;
+			9) COIN="wownero"
+			   coinname="Wownero"
+			   coinsymbol="WOW"
+			;;
+			*) $red"\nYou must answer 1-9\n"; $nc
+			;;
+		esac
+	done
+}
+
+book_min() {
+	if   [[ $coin = 1 ]]; then # BITCOIN
+		OB_MIN=0.0050
+		MIN_SWAP=0.0010
+	elif [[ $coin = 2 ]]; then # MONERO
+		OB_MIN=0.2000
+		MIN_SWAP=0.0300
+	elif [[ $coin = 3 ]]; then # LITECOIN
+		OB_MIN=0.4000
+		MIN_SWAP=0.0600
+	elif [[ $coin = 4 ]]; then # FIRO
+		OB_MIN=20.0000
+		MIN_SWAP=8.0000
+	elif [[ $coin = 5 ]]; then # DASH
+		OB_MIN=1.0000
+		MIN_SWAP=0.2000
+	elif [[ $coin = 6 ]]; then # DECRED
+		OB_MIN=1.0000
+		MIN_SWAP=0.2000
+	elif [[ $coin = 7 ]]; then # PIVX
+		OB_MIN=50.0000
+		MIN_SWAP=10.0000
+	elif [[ $coin = 8 ]]; then # PARTICL
+		OB_MIN=50.0000
+		MIN_SWAP=10.0000
+	elif [[ $coin = 9 ]]; then # WOWNERO
+		OB_MIN=50.0000
+		MIN_SWAP=10.0000
+	fi
+}
+
+set_fiat() {
+	printf "[1] USD [default]\n[2] EUR\n[3] CAD\n[4] AUD\n[5] CUSTOM\n\n"
+	read -p 'Select an option: ' fiat_select
+	case $fiat_select in
+		1) FIAT=USD
+		   fiat=usd
+		   echo "USD"
+		;;
+		2) FIAT=EUR
+		   fiat=eur
+		   echo "EUR"
+		;;
+		3) FIAT=CAD
+		   fiat=cad
+		   echo "CAD"
+		;;
+		4) FIAT=AUD
+		   fiat=aud
+		   echo "AUD"
+		;;
+		5) read -p 'Please enter the lowecase 3 character currency code [example: jpy] ' FIAT
+		   fiat=$FIAT
+		;;
+		*) FIAT=USD
+		   fiat=usd
+		   echo "USD"
+
+		;;
+	esac
+}
+
+coin_price() {
+	printf "\n\nCurrent Market Rates are..\n"
+	curl -s "https://api.coingecko.com/api/v3/simple/price?ids=$THEIR_COIN,$YOUR_COIN&vs_currencies=$fiat" > rates.txt
+	YOUR_FIAT=$(cat rates.txt | jq -r ".$YOUR_COIN.$fiat")
+	THEIR_FIAT=$(cat rates.txt | jq -r ".$THEIR_COIN.$fiat")
+	TAKER_RATE=$(echo $THEIR_FIAT $YOUR_FIAT | awk '{ printf "%.8f\n", $1 / $2 }' )
+	MAKER_RATE=$(echo $TAKER_RATE | awk '{ printf "%.8f\n", 1 / $1 }')
+	$cy"$THEIR_FIAT $FIAT$nc2/$grn2$theircoin$nc2 which is $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin$nc2\n"
+	$cy"$YOUR_FIAT $FIAT$nc2/$red2$yourcoin$nc2 which is $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin$nc2\n"
+	rm rates.txt
+}
+
+buy_sell() {
+	printf "\n\n[1] BUY a specific amount of $grn2$theircapital$nc2\n[2] SELL a specific amount of your $red2$yourcapital$nc2\n\n"
+	until [[ $BUYORSELL =~ ^[12]$ ]]; do
+		read -p 'Select an option: ' BUYORSELL
+		case $BUYORSELL in
+			1) read -p $'\nHow much '"$theircapital"' do you want to BUY? [example: 1] ' AMOUNT
+			   $cy"\nRate you will pay:\n";$nc
+			   printf "\n[1] CUSTOM: Specific Crypto Rate $red2$yourcoin$nc2/$grn2$theircoin$nc2\n[2] CUSTOM: $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin $cy2+/- CUSTOM Percent$nc2\n[3] PRESET: $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin$nc2\n[4] PRESET: $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin $cy2+ $PERCENT%%$nc2\n[ENTER] FIAT: Enter a $cy2$FIAT$nc2 rate to pay\n\n"
+			   read -p 'Select an option: ' RATESEL
+			   case $RATESEL in
+				1) read -p $"At what rate would you like to Pay? [example: $TAKER_RATE] " RATE
+				   PRICE=$(echo $YOUR_FIAT $RATE | awk '{ printf "%.2f\n", $1 * $2 }')
+				   PERCENT=0
+				;;
+				2) read -p 'Pay this much % above or below market [example: [0.5|-0.5] ' PERCENT
+				   RATE=$(echo $TAKER_RATE $PERCENT | awk '{ printf "%.8f\n", ( $1 * ( $2 / 100 + 1 ))}')
+				   PRICE=$(echo $YOUR_FIAT * $RATE | awk '{ printf "%.2f\n", $1 * $2 }')
+				;;
+				3) RATE=$TAKER_RATE
+				   PRICE=$THEIR_FIAT
+				   PERCENT=0
+				;;
+				4) RATE=$(echo $TAKER_RATE $PERCENT | awk '{ printf "%.8f\n", ( $1 * ( $2 / 100 + 1 ))}')
+				   PRICE=$(echo $YOUR_FIAT $RATE | awk '{ printf "%.2f\n", $1 * $2 }')
+				;;
+				*) read -p $"Enter specific price in $FIAT to PAY? [example: "$THEIR_FIAT"] " PRICE
+				   RATE=$(echo $PRICE $YOUR_FIAT | awk '{ printf "%.8f\n", $1 / $2 }')
+				   PERCENT=0
+				;;
+			   esac
+			   MAKER_RATE=$(echo $RATE | awk '{ printf "%.8f\n", 1 / $1 }')
+			   printf "\nPaying: $red2 $PRICE$FIAT$nc2 which is $red2($RATE $yourcoin$nc2/$grn2$theircoin$nc2)\n"
+			   printf "Rate to be paid: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin$nc2\n\n"
+			;;
+			2) read -p $'\nHow much YOUR '"$yourcapital"' do you want to SELL [example: 1] ' AMOUNT
+			   $cy"\nRate to charge:\n";$nc
+			   printf "\n[1] CUSTOM: Specific Crypto Rate $grn2$theircoin$nc2/$red2$yourcoin$nc2\n[2] CUSTOM: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin $cy2+/- CUSTOM Percent$nc2\n[3] PRESET: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin$nc2\n[4] PRESET: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin $cy2+ $PERCENT%%$nc2\n[ENTER] FIAT: Enter a $cy2$FIAT$nc2 rate to charge\n\n"
+			   read -p 'Select an option: ' RATESEL
+			   case $RATESEL in
+				1) read -p $"Enter specific rate to Charge? [example: $MAKER_RATE] " RATE
+				   PRICE=$(echo $THEIR_FIAT $RATE | awk '{ printf "%.2f\n", $1 * $2 }')
+				   PERCENT=0
+				;;
+				2) read -p 'Charge this much percent above market [example: [0.5 or -0.5] ] ' PERCENT
+				   RATE=$(echo $MAKER_RATE $PERCENT | awk '{ printf "%.8f\n", ( $1 * ( $2 / 100 + 1 ))}')
+				   PRICE=$(echo $THEIR_FIAT $RATE | awk '{ printf "%.2f\n", $1 * $2 }')
+				;;
+				3) RATE=$MAKER_RATE
+				   PRICE=$(echo $THEIR_FIAT $RATE | awk '{ printf "%.2f\n", $1 * $2 }')
+				   PERCENT=0
+				;;
+				4) RATE=$(echo $MAKER_RATE $PERCENT | awk '{ printf "%.8f\n", ( $1 * ( $2 / 100 + 1 ))}')
+				   PRICE=$(echo $THEIR_FIAT $RATE | awk '{ printf "%.2f\n", $1 * $2 }')
+				;;
+				*) read -p $"Enter specific price in $FIAT to Charge? [example: "$YOUR_FIAT"] " PRICE
+				   RATE=$(echo $PRICE $THEIR_FIAT | awk '{ printf "%.8f\n", $1 / $2 }')
+				   PERCENT=0
+				;;
+				esac
+			   TAKER_RATE=$(echo $RATE | awk '{ printf "%.8f\n", 1 / $1 }')
+			   printf "Selling at $PRICE$FIAT which is a rate of $grn2$RATE $theircoin$nc2/$red2$yourcoin$nc2\n"
+			;;
+			*) $red"\nYou must answer 1 or 2\n"; $nc
+			;;
+		esac
+	done
+}
+
+# TODO // ENABLE SPLIT ORDERS
+split_orders() {
+	if [ $ALLOW_SPLIT_ORDERS = true ]; then
+		MIN_SWAP=$(echo $AMOUNT $MAXBIDS | awk '{ printf "%.0f\n", $1 / $2 }')
+		printf "$cy2#TODO$nc2 Splitting into multiple bids if necessary. $red2$MAXBIDS$nc2 tx at most\n"
+	else
+		MIN_SWAP=$AMOUNT
+		$red"One order only. Not Recommended";$nc
+		echo "$MIN_SWAP"
+	fi
+}
+
+apply_config() {
+	# Convert amount
+	MIN_TAKER=$(echo $MIN_SWAP $MAKER_RATE | awk '{ printf "%.8f\n", $1 * $2 }')
+	sed -i -z "s/MIN_SWAP/$MIN_TAKER/" $taker
+	sed -i -z "s/MIN_SWAP/$MIN_SWAP/" $maker
+	sed -i -z "s/COIN_TO_SELL/$yourcapital/" $taker $maker
+	sed -i -z "s/COIN_TO_BUY/$theircapital/" $taker $maker
+	sed -i -z "s/PERCENT/$PERCENT/" $maker
+	sed -i -z "s/MAXBIDS/$MAXBIDS/" $taker
+	printf "\nMinumum amt per swap	= $grn2$MIN_TAKER $theircoin$nc2\n"
+	printf "			= $red2$MIN_SWAP $yourcoin$nc2\n\n"
+	if [[ $BUYORSELL = 1 ]]; then
+		MAKERAMOUNT=$(echo $AMOUNT $MAKER_RATE | awk '{ printf "%.8f\n", $1 / $2 }')
+		OB_AMOUNT=$MAKERAMOUNT
+		INCREMENT=$(echo $OB_AMOUNT | awk '{ printf "%.4f", $1 / 10 }')
+		printf "Outgoing: $red2$MAKERAMOUNT $yourcoin$nc2\n"
+		printf "Incoming: $grn2~$AMOUNT $theircoin$nc2\n"
+		sed -i -z "s/AMOUNT/$MAKERAMOUNT/g" $maker
+		sed -i -z "s/RATE/$MAKER_RATE/" $maker
+		sed -i -z "s/RATE/$RATE/" $taker
+		sed -i -z "s/AMOUNT/$AMOUNT/g" $taker
+		sed -i -z "s/INCREMENT/$INCREMENT/" $maker
+	else
+		TAKERAMOUNT=$(echo $AMOUNT $MAKER_RATE | awk '{ printf "%.8f\n", $1 * $2 }')
+		OB_AMOUNT=$AMOUNT
+		INCREMENT=$(echo $OB_AMOUNT | awk '{ printf "%.4f", $1 / 10 }')
+		printf "Outgoing: $red2$AMOUNT $yourcoin$nc2\n"
+		printf "Incoming: $grn2~$TAKERAMOUNT $theircoin$nc2\n"
+		sed -i -z "s/AMOUNT/$TAKERAMOUNT/g" $taker
+		sed -i -z "s/RATE/$TAKER_RATE/" $taker
+		sed -i -z "s/RATE/$RATE/" $maker
+		sed -i -z "s/AMOUNT/$AMOUNT/g" $maker
+		sed -i -z "s/INCREMENT/$INCREMENT/" $maker
+	fi
+}
+
+revert_config() {
+	cp placeorders_state.json.template $state
+	cp placeoffer.json.template $maker
+	cp placebid.json.template $taker
+}
+
+check_bids() {
+	# oneshot. Check for matching offers before posting one
+	revert_config
+	apply_config
+	FOUNDBID=$(python3 createoffers.py --configfile $taker --statefile $state --port=$PORT --oneshot --debug | grep "New bid")
+ 	if [[ $FOUNDBID ]]; then
+		$grn"Placed bid successfully! Check BasicSwapDEX to confirm\n";$nc
+	elif [[ $OB_AMOUNT < $OB_MIN && -z $FOUNDBID ]]; then
+		printf "Checking for a matching offer\n"
+		printf "No matching offers found $red2:@ !!!$nc2\nBid quantity too$red2 low$nc2 to post to order book.\nTrying again in 30 seconds\n"
+		sleep 30
+		$cy"Rechecking bids\n";$nc
+		recheck_bids
+	else
+		# Post as limit order on the book
+		$cy"No matching offers found. Posting to the orderbook\n";$nc
+		ORDERPLACED=$(python3 createoffers.py --configfile $maker --statefile $state --port=$PORT --oneshot | grep "New offer")
+		if [[ $ORDERPLACED ]]; then
+			$grn"OFFER POSTED! Please check BasicSwapDEX to confirm\nOffer expires in 4hrs\n";$nc
+		else
+			$red"Placing Order failed. Try again$nc2\n"
+		fi
+	fi
+}
+
+recheck_bids() {
+	check_bids
+	echo rechecking
+}
+
+# 1. Choose coins
+	revert_config
+	set_fiat
+
+	$grn"\n\nName of coin to buy";$nc
+	coin
+	coin_prompt_buy
+
+	$red"\n\nName of coin to sell";$nc
+	coin
+	coin_prompt_sell
+
+	printf "\nBuying: $grn2$theircapital$nc2"
+	printf "\nSelling: $red2$yourcapital$nc2\n"
+
+#2. Set rates
+# Pull Market rate
+	coin_price
+	buy_sell
+	split_orders
+	book_min
+
+#3. Attempt bid / Post offer
+	check_bids

bsx/placeorders/placeorders_state.json.template

@@ -0,0 +1,6 @@
+{
+    "offers": {
+    },
+    "bids": {
+    }
+}

bsx/removecoin.sh

@@ -1,10 +1,10 @@
 #!/bin/bash
 
 ## Prompt for user input
-echo -e "\n\nThe following coins can be disabled (case sensitive)\nbitcoin\ndash\nfiro\nlitecoin\nmonero\npivx\n"
-read -p 'Full name of coin to disable [example: litecoin] ' disablecoin
+printf "\n\nThe following coins can be disabled (case sensitive)\nbitcoin\ndash\ndecred\nfiro\nlitecoin\nmonero\npivx\nwownero\n\n"
+read -p 'Full name of coin to disable [example: wownero] ' disablecoin
 ## Confirm
-echo -e "\nDisable $disablecoin on your BasicSwap install, correct? Press any key to continue. CTRL-C to exit"
+printf "\nDisable $disablecoin on your BasicSwap install, correct? Press any key to continue. CTRL-C to exit\n"
 read
 ## Disable the coin
 basicswap-prepare --datadir=$SWAP_DATADIR --disablecoin=$disablecoin

bsx/setup.sh

@@ -1,28 +1,23 @@
 #!/bin/bash
 
 # Colors
-red="echo -e -n \e[31;1m"
-green="echo -e -n \e[32;1m"
-nocolor="echo -e -n \e[0m"
-
-## UBUNTU 22.04 FIX upgrade protobuf inside of venv
-python -m pip install --upgrade "protobuf<=3.20.1"
-
-## Download & Install coincurve stuff
-cd $SWAP_DATADIR
-wget -O coincurve-anonswap.zip https://github.com/tecnovert/coincurve/archive/refs/tags/anonswap_v0.2.zip
-unzip -d coincurve-anonswap coincurve-anonswap.zip
-mv -f ./coincurve-anonswap/*/{.,}* ./coincurve-anonswap || true
-cd $SWAP_DATADIR/coincurve-anonswap
-$SWAP_DATADIR/venv/bin/pip install .
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"
 
 ## Clone basicswap git
 cd $SWAP_DATADIR
-git clone https://github.com/tecnovert/basicswap.git
+git clone https://github.com/basicswap/basicswap
 cd $SWAP_DATADIR/basicswap
-## Install basicswap
-protoc -I=basicswap --python_out=basicswap basicswap/messages.proto
-$SWAP_DATADIR/venv/bin/pip install .
+
+## Macos
+if [[ $MACOS ]]; then
+    $SWAP_DATADIR/venv/bin/pip3 install certifi
+fi
+
+## Install basicswap, coincurve, and pip dependencies
+$SWAP_DATADIR/venv/bin/pip3 install -r requirements.txt --require-hashes
+$SWAP_DATADIR/venv/bin/pip3 install .
 
 ## Decide a source for Monero's restore height
 if [[ "$xmrrestoreheight" ]]; then
@@ -32,34 +27,40 @@ elif [[ "$monerod_addr" ]]; then
 	CURRENT_XMR_HEIGHT=$(curl "http://$monerod_addr:$monerod_port/get_info" | jq .height)
 else
 	# Use public node
-	CURRENT_XMR_HEIGHT=$(curl https://localmonero.co/blocks/api/get_stats | jq .height)
+	CURRENT_XMR_HEIGHT=$(curl http://node3.monerodevs.org:18089/get_info | jq .height)
 fi
 
 # Use Tor if we want
 enable_tor() {
 	if [[ "$tor_on" = 1 ]]; then
-		/usr/local/bin/bsx-enabletor
+		$HOME/.local/bin/bsx-enabletor
 	fi
 }
 
-# Use the custom Monero node
+# Use the custom Monero node & add wownero because its a small chain
 if   [[ "$particl_mnemonic" && "$monerod_addr" ]]; then
+	# Restore seed
 	PARTICL_MNEMONIC=$particl_mnemonic
-	basicswap-prepare --datadir=$SWAP_DATADIR --particl_mnemonic="$PARTICL_MNEMONIC"
-	XMR_RPC_HOST=$monerod_addr BASE_XMR_RPC_PORT=$monerod_port basicswap-prepare --datadir=$SWAP_DATADIR --addcoin=monero --xmrrestoreheight=$CURRENT_XMR_HEIGHT
+	XMR_RPC_HOST=$monerod_addr XMR_RPC_PORT=$monerod_port \
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC"
 	enable_tor
 elif [[ "$particl_mnemonic" ]]; then
+	# Restore seed
 	PARTICL_MNEMONIC=$particl_mnemonic
-	basicswap-prepare --datadir=$SWAP_DATADIR --particl_mnemonic="$PARTICL_MNEMONIC"
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC"
 	enable_tor
 elif [[ "$monerod_addr" ]]; then
-	XMR_RPC_HOST=$monerod_addr BASE_XMR_RPC_PORT=$monerod_port basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero --xmrrestoreheight=$CURRENT_XMR_HEIGHT
-	$red"\n\nMake note of your seed above\n"; $nocolor
+	# Setup new install and use a remote monero node
+	XMR_RPC_HOST=$monerod_addr XMR_RPC_PORT=$monerod_port \
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
+	$red"\n\nMake note of your seed above\n\n"; $nocolor
 	enable_tor
 else
-	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero --xmrrestoreheight=$CURRENT_XMR_HEIGHT
-	$red"\n\nMake note of your seed above\n"; $nocolor
+	# Setup new install using local nodes
+	basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
+	$red"\n\nMake note of your seed above\n\n"; $nocolor
 	enable_tor
 fi
 
-$green"Install complete.\n\nUse 'basicswap-bash' to run, 'bsx-update' to update, and 'bsx-addcoin' to add a coin\n"; $nocolor
+$green"Install complete.\n\nUse 'basicswap-bash' to run, 'bsx-update' to update, and 'bsx-addcoin' to add a coin\n\n";$nocolor
+$red"You may have to logout / login or open a new terminal window for the commands to be detected\n";$nocolor

bsx/tails_setup.sh

@@ -0,0 +1,66 @@
+#!/bin/bash
+
+# Colors
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"
+
+## Clone basicswap git
+cd $SWAP_DATADIR
+git clone https://github.com/basicswap/basicswap
+cd $SWAP_DATADIR/basicswap
+
+## Macos
+if [[ $MACOS ]]; then
+    $SWAP_DATADIR/venv/bin/pip3 install certifi
+fi
+
+## Install basicswap, coincurve, and pip dependencies
+torsocks $SWAP_DATADIR/venv/bin/pip3 install -r requirements.txt --require-hashes
+torsocks $SWAP_DATADIR/venv/bin/pip3 install .
+
+## Decide a source for Monero's restore height
+if [[ "$xmrrestoreheight" ]]; then
+	CURRENT_XMR_HEIGHT=$xmrrestoreheight
+elif [[ "$monerod_addr" ]]; then
+	# Use custom Monero node
+	CURRENT_XMR_HEIGHT=$(curl "http://$monerod_addr:$monerod_port/get_info" | jq .height)
+else
+	# Use public node
+	CURRENT_XMR_HEIGHT=$(curl http://node3.monerodevs.org:18089/get_info | jq .height)
+fi
+
+# Use Tor if we want
+enable_tor() {
+	if [[ "$tor_on" = 1 ]]; then
+		$HOME/.local/bin/bsx-enabletor
+	fi
+}
+
+# Use the custom Monero node & add wownero because its a small chain
+if   [[ "$particl_mnemonic" && "$monerod_addr" ]]; then
+	# Restore seed
+	PARTICL_MNEMONIC=$particl_mnemonic
+	XMR_RPC_HOST=$monerod_addr XMR_RPC_PORT=$monerod_port \
+	torsocks basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC"
+	enable_tor
+elif [[ "$particl_mnemonic" ]]; then
+	# Restore seed
+	PARTICL_MNEMONIC=$particl_mnemonic
+	torsocks basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000 --particl_mnemonic="$PARTICL_MNEMONIC"
+	enable_tor
+elif [[ "$monerod_addr" ]]; then
+	# Setup new install and use a remote monero node
+	XMR_RPC_HOST=$monerod_addr XMR_RPC_PORT=$monerod_port \
+	torsocks basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
+	$red"\n\nMake note of your seed above\n\n"; $nocolor
+	enable_tor
+else
+	# Setup new install using local nodes
+	torsocks basicswap-prepare --datadir=$SWAP_DATADIR --withcoins=monero,wownero --xmrrestoreheight=$CURRENT_XMR_HEIGHT --wowrestoreheight=600000
+	$red"\n\nMake note of your seed above\n\n"; $nocolor
+	enable_tor
+fi
+
+$green"Install complete.\n\nUse 'basicswap-bash' to run, 'bsx-update' to update, and 'bsx-addcoin' to add a coin\n\n";$nocolor
+$red"You may have to logout / login or open a new terminal window for the commands to be detected\n";$nocolor

bsx/update.sh

@@ -1,4 +1,26 @@
 #!/bin/bash
+
+echo "Updating BasicSwapDEX" && sleep 1
+# Delete dangling build folder. Same as --no-cache for docker
+rm -rf $SWAP_DATADIR/basicswap/build
+
+# BasicSwap, coincurve, and dependencies
+# Switch to new repo: basicswap/basicswap
 cd $SWAP_DATADIR/basicswap
+git remote set-url origin https://github.com/basicswap/basicswap
+
+# Conflicting messages_pb2.py from v0.12.7
+if [[ -f basicswap/messages_pb2.py ]]; then
+    git restore basicswap/messages_pb2.py
+fi
+
+#git checkout master
 git pull
-$SWAP_DATADIR/venv/bin/pip install .
+$SWAP_DATADIR/venv/bin/pip3 install -r requirements.txt --require-hashes
+$SWAP_DATADIR/venv/bin/pip3 install .
+
+# Update Coin Cores
+$HOME/.local/bin/bsx/auto_coinupd8.sh
+
+# Cleanup
+rm -rf basicswap-bash

bsx/upgradecoins.sh

@@ -1,13 +0,0 @@
-#!/bin/bash
-
-## Prompt for user input
-echo "You can only update coins which you have already added to your install"
-echo -e "\n\nList of coins supported by BasicSwapDEX (case sensitive):\nbitcoin\ndash\nfiro\nlitecoin\nmonero\nparticl\npivx\n"
-read -p 'Full name of coin to update [example: litecoin] ' updatecoin
-
-## Confirm
-read -p $'\nUpdate $updatecoin, correct? Press any key to continue. CTRL-C to exit'
-
-## Update the coin
-basicswap-prepare --datadir=$SWAP_DATADIR -preparebinonly --withcoins=$updatecoin
-echo "Updated $updatecoin"

core_versions

@@ -0,0 +1,9 @@
+Bitcoin Core version v26.0.0
+dcrd version 1.8.1+release (Go version go1.21.1 linux/amd64)
+Dash Core version v21.1.0
+Firo Core Daemon version v0.14.14.0-ge0c423805
+Litecoin Core version v0.21.3
+Particl Core version v23.2.7.0
+PIVX Core Daemon version v5.6.1.0-af60f19642
+Monero 'Fluorine Fermi' (v0.18.3.4-release)
+Wownero 'Kunty Karen' (v0.11.1.0-release)

install.sh

@@ -1,9 +1,22 @@
 #/bin/bash
+export SWAP_DATADIR=$HOME/coinswaps
 
 # Colors
-red="echo -e -n \e[31;1m"
-green="echo -e -n \e[32;1m"
-nocolor="echo -e -n \e[0m"
+red="printf \e[31;1m"
+green="printf \e[32;1m"
+nocolor="printf \e[0m"
+
+# Check if basicswap is running
+if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
+    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
+    if [[ $bsx_pid ]]; then
+        bsx_run=$(pidof particld | grep $bsx_pid)
+        if [[ $bsx_run ]]; then
+            $red"\nError: BasicSwapDEX is already installed.\n"; $nocolor
+            exit
+        fi
+    fi
+fi
 
 # Title Bar
 $green "\n"
@@ -11,57 +24,81 @@ title="BasicSwapDEX Installer"
 COLUMNS=$(tput cols)
 title_size=${#title}
 span=$(((COLUMNS + title_size) / 2))
-printf "%${COLUMNS}s" " " | tr " " "*"
+printf "%${COLUMNS}s" " " | tr " " "#"
 printf "%${span}s\n" "$title"
-printf "%${COLUMNS}s" " " | tr " " "*"
+printf "%${COLUMNS}s" " " | tr " " "#"
 $nocolor
 
 # Detect Operating system
 INSTALL=""
 UPDATE=""
 DEPENDENCY=""
+TAILS=""
+
+check_tails() {
+	if [[ $USER == amnesia ]]; then
+	    $green"\n\nDetected Tails";$nocolor
+	    TAILS=1
+	else
+	    $green"\n\nDetected Debian";$nocolor
+	fi
+}
+
 detect_os_arch() {
-    if type -P apt > /dev/null; then
+    if [[ $(uname -s) = "Darwin" ]]; then
+	# MacOS
+	export MACOS=1
+	if type -p brew > /dev/null; then
+	    $green"Homebrew is installed\n";$nc
+	    INSTALL="brew install"
+	else
+	    $green"Installing Homebrew\n";$nc
+	    INSTALL="curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh | /bin/bash && brew install"
+	fi
+        DEPENDENCY="python gnupg pkg-config"
+	$green"\n\nDetected MacOS";$nocolor
+    elif type -p apt > /dev/null; then
+	check_tails
         # Debian / Ubuntu / Mint
         INSTALL="sudo apt install"
         UPDATE="sudo apt update"
-        DEPENDENCY="python-is-python3 python3-pip python3-venv gnupg pkg-config protobuf-compiler"
-	$green"\nDetected Debian\n";$nocolor
-    elif type -P dnf > /dev/null; then
+        DEPENDENCY="python3-pip python3-venv libpython3-dev gnupg pkg-config"
+    elif type -p dnf > /dev/null; then
         # Fedora
         INSTALL="sudo dnf install"
         UPDATE="sudo dnf check-update"
-        DEPENDENCY="python3-virtualenv python3-pip python3-devel gnupg2 pkgconf protobuf-compiler"
-	$green"\nDetected Fedora\n";$nocolor
-    elif type -P pacman > /dev/null; then
+        DEPENDENCY="python3-virtualenv python3-pip python3-devel gnupg2 pkgconf"
+	$green"\n\nDetected Fedora";$nocolor
+    elif type -p pacman > /dev/null; then
         # Arch Linux
         INSTALL="sudo pacman -S"
         UPDATE="sudo pacman -Syu"
-        DEPENDENCY="python-pipenv gnupg protobuf pkgconf base-devel"
-	$green"\nDetected Arch Linux\n";$nocolor
-    elif type -P brew > /dev/null; then
-        # MacOS
-        INSTALL="brew install"
-        DEPENDENCY="python protobuf gnupg pkg-config"
-	$green"\nDetected MacOS\n";$nocolor
+        DEPENDENCY="curl python-pipenv gnupg pkgconf base-devel"
+	$green"\n\nDetected Arch Linux";$nocolor
     else
-        $red"Failed to detect OS. Unsupported or unknown distribution.\nInstall Failed.";$nocolor
+        $red"\nFailed to detect OS. Unsupported or unknown distribution.\nInstall Failed.\n";$nocolor
 	exit
     fi
 }
 
 detect_os_arch
 
+## Update & Install dependencies
+printf "\n\nInstalling dependencies\nPress CTRL-C at password prompt(s) to skip. If skipped, you must install the dependencies manually before proceeding\n\n"
+$green"$UPDATE\n$INSTALL $DEPENDENCY curl automake libtool jq\n"; $nocolor
+$UPDATE
+$INSTALL $DEPENDENCY automake libtool jq
+
 # Enable tor
-echo -e "\n\n[1] Tor ON\n[2] Tor OFF\n"
+printf "\n[1] Tor ON (requires sudo)\n[2] Tor OFF\n"
 until [[ "$tor_on" =~ ^[12]$ ]]; do
 read -p 'Select an option: [1|2] ' tor_on
 	case $tor_on in
 		1)
-		$green"\nBasicSwapDEX will use Tor";$nocolor
+		$green"BasicSwapDEX will use Tor\n";$nocolor
 		;;
 		2)
-		$red"\nBasicSwapDEX will NOT use Tor";$nocolor
+		$red"BasicSwapDEX will NOT use Tor\n";$nocolor
 		;;
 		*)
 		$red"You must answer 1 or 2\n";$nocolor
@@ -70,22 +107,22 @@ read -p 'Select an option: [1|2] ' tor_on
 done
 
 ## Particl restore Seed
-echo -e "\n\n[1] New Install (default)\n[2] Restore from Particl Seed\n"
+printf "\n[1] New Install (default)\n[2] Restore from Particl Seed\n"
 until [[ "$restore" =~ ^[12]$ ]]; do
 read -p 'Select an option: [1|2] ' restore
 	case $restore in
 		1)
-		$green"\nInstalling BasicSwapDEX\n"; $nocolor
+		$green"Installing BasicSwapDEX\n"; $nocolor
 		;;
 		2)
 		until [[ "$wordcount" = "24" ]]; do
 		read -p $'\nEnter your Particl Seed\n[example: word word word word word...] ' particl_mnemonic
 		wordcount=$(echo $particl_mnemonic | wc -w)
 			if  [[ $wordcount = 24 ]]; then
-				echo -e "Restoring BasicSwapDEX"
+				printf "Restoring BasicSwapDEX\n"
 				$green"$particl_mnemonic\n";$nocolor
 			else
-				$red"Try again. Seed must be 24 words"; $nocolor
+				$red"Try again. Seed must be 24 words\n"; $nocolor
 			fi
 		done
 		;;
@@ -100,13 +137,13 @@ if [[ $particl_mnemonic ]]; then
 	read -p $'\nEnter a restore height for your BasicSwap XMR wallet? [Y/n] ' height
 	case $height in
 		n|N)
-		$red"\nNot using a custom XMR Restore height";$nocolor
+		$red"Not using a custom XMR Restore height\n";$nocolor
 		;;
 		*)
 		until [[ "$xmrrestoreheight" =~ ^[0-9]{1,7}$ ]]; do
 		read -p $'Enter your Monero Restore Height [example: 2548568] ' xmrrestoreheight
 			if  [[ $xmrrestoreheight =~ ^[0-9]{7}$ ]]; then
-				$green"\nYour XMR Restore height: $xmrrestoreheight"; $nocolor
+				$green"Your XMR Restore height: $xmrrestoreheight\n"; $nocolor
 			else
 				$red"Try again. Must be 1-7 digits\n"; $nocolor
 			fi
@@ -116,17 +153,24 @@ if [[ $particl_mnemonic ]]; then
 fi
 
 ## Configure Monero
-echo -e "\n[1] Connect to a Monero node\n[2] Allow BasicSwapDEX to run a Monero node (+70GB)\n"
+printf "\n[1] Connect to a Monero node\n[2] Allow BasicSwapDEX to run a Monero node (+70GB)\n"
 until [[ "$l" =~ ^[12]$ ]]; do
 read -p 'Select an option [1|2]: ' l
 	case $l in
 		1)
+		until [[ $checknode ]]; do
 			read -p 'Enter Address of Monero node [example: 192.168.1.123] ' monerod_addr
 			read -p 'Enter RPC Port for the Monero node [example: 18081] ' monerod_port
-		$green"\nLook good? $monerod_addr:$monerod_port"; $nocolor
+			checknode=$(curl -sk http://$monerod_addr:$monerod_port/get_info | jq .height)
+			if [[ $checknode ]]; then
+				$green"Successfully connected to the XMR node @ $monerod_addr:$monerod_port\n"; $nocolor
+			else
+				$red"The node at $monerod_addr:$monerod_port is not accessible. Try again\n"; $nocolor
+			fi
+		done
 		;;
 		2)
-		$green"\nBasicSwapDEX will run the Monero node for you."; $nocolor
+		$green"BasicSwapDEX will run the Monero node for you.\n"; $nocolor
 		;;
 		*)
 		$red"You must answer 1 or 2\n"; $nocolor
@@ -135,22 +179,47 @@ read -p 'Select an option [1|2]: ' l
 done
 
 ## Begin Install
-echo -e "\n\nInstalling dependencies"
+printf "\nInstalling BasicSwapDEX\n"
 read -p 'Press Enter to continue, or CTRL-C to exit.'
-## Update & Install dependencies
-$UPDATE
-$INSTALL $DEPENDENCY git wget unzip automake libtool jq
-# Move scripts to /usr/local/bin
-sudo rm -r /usr/local/bin/bsx* /usr/local/bin/basicswap-bash
-sudo mv -f -t /usr/local/bin/ basicswap-bash bsx*
+
+# Quest to make trasher happy
+addpath='PATH="$HOME/.local/bin:$PATH"'
+trasherdk=$(echo $PATH | grep -F '.local/bin')
+
+if [[ ! -d $HOME/.local/bin ]]; then
+    mkdir -p $HOME/.local/bin
+fi
+
+if [[ -z $trasherdk ]]; then
+
+    # Bash
+    if [[ -f $HOME/.bashrc ]]; then
+        echo "export $addpath" | tee -a $HOME/.bashrc
+    fi
+    # Zsh
+    if [[ -f $HOME/.zshrc ]]; then
+        echo "export $addpath" | tee -a $HOME/.zshrc
+    fi
+    # xfce4
+    if [[ -f $HOME/.xsessionrc ]]; then
+        echo "export $addpath" | tee -a $HOME/.xsessionrc
+    fi
+
+fi
+
+# Move scripts to .local/bin
+if [[ -d $HOME/.local/bin/bsx ]]; then
+    rm -r $HOME/.local/bin/bsx* $HOME/.local/bin/basicswap-bash
+fi
+cp -r basicswap-bash bsx* $HOME/.local/bin/
+
 ## Make venv and set variables for install
-export SWAP_DATADIR=$HOME/coinswaps
 export monerod_addr=$monerod_addr
 export monerod_port=$monerod_port
 export particl_mnemonic=$particl_mnemonic
 export xmrrestoreheight=$xmrrestoreheight
 export tor_on=$tor_on
-mkdir -p "$SWAP_DATADIR/venv"
-python -m venv "$SWAP_DATADIR/venv"
+export TAILS=$TAILS
+python3 -m venv "$SWAP_DATADIR/venv"
 ## Activate venv
-/usr/local/bin/bsx/activate_venv.sh
+$HOME/.local/bin/bsx/activate_venv.sh

scriptinstall.sh

@@ -1,10 +0,0 @@
-#/bin/bash
-# Download Scripts
-curl -LO https://github.com/nahuhh/basicswap-bash/releases/download/beta/basicswap-beta.tar.gz
-tar xvf basicswap-beta.tar.gz
-cd basicswap-beta
-# Install BasicSwapDEX
-./install.sh
-# Cleanup
-cd ..
-rm -rf basicswap-beta

scriptupdate.sh

@@ -1,11 +0,0 @@
-#/bin/bash
-# Download updated scripts
-curl -LO https://github.com/nahuhh/basicswap-bash/releases/download/beta/basicswap-beta.tar.gz
-tar xvf basicswap-beta.tar.gz
-cd basicswap-beta
-# Move scripts
-sudo rm -rf /usr/local/bin/bsx
-sudo mv -f basic* bsx* /usr/local/bin/
-# Cleanup install
-cd ..
-rm -rf basicswap-beta