add placeorder script

bsx-placeorder

@@ -0,0 +1,25 @@
+#!/bin/bash
+export SWAP_DATADIR=$HOME/coinswaps
+
+# Colors
+red="echo -e -n \e[31;1m"
+green="echo -e -n \e[32;1m"
+nocolor="echo -e -n \e[0m"
+
+# Check if basicswap is running
+if [[ -f $SWAP_DATADIR/particl/particl.pid ]]; then
+    bsx_pid=$(cat $SWAP_DATADIR/particl/particl.pid)
+    bsx_run=$(pidof particld | grep $bsx_pid)
+    if ! [[ $bsx_run ]]; then
+        $red"\nError: BasicSwapDEX must be running.\n"; $nocolor
+        exit
+    fi
+else
+    $red"\nError: BasicSwapDEX must be running.\n"; $nocolor
+    exit
+fi
+
+mv $HOME/.local/bin/bsx/placeorders/* $SWAP_DATADIR/basicswap/scripts/
+cd $SWAP_DATADIR/basicswap/scripts/
+
+./placeorders.sh

bsx/placeorders/placebid.json.template

@@ -0,0 +1,25 @@
+{
+    "offers": [],
+    "bids": [
+        {
+            "coin_from": "COIN_TO_BUY",
+            "coin_to": "COIN_TO_SELL",
+            "amount": AMOUNT,
+            "maxrate": RATE,
+            "address": "-1",
+            "min_swap_amount": MIN_SWAP,
+            "max_coin_from_balance": -1,
+            "min_coin_to_balance": 0,
+            "max_concurrent": MAXBIDS,
+            "name": "GUI Bid"
+        }
+    ],
+    "stealthex": [],
+    "min_seconds_between_offers": 5,
+    "max_seconds_between_offers": 5,
+    "min_seconds_between_bids": 10,
+    "max_seconds_between_bids": 10,
+    "num_enabled_offers": 0,
+    "num_enabled_bids": 1,
+    "num_enabled_swaps": 0
+}

bsx/placeorders/placeoffer.json.template

@@ -0,0 +1,27 @@
+{
+    "offers": [
+        {
+            "enabled": true,
+            "coin_from": "COIN_TO_SELL",
+            "coin_to": "COIN_TO_BUY",
+            "amount": AMOUNT,
+            "minrate": RATE,
+            "ratetweakpercent": PERCENT,
+            "amount_variable": true,
+            "address": "-1",
+            "name": "GUI Offer",
+            "min_coin_from_amt": AMOUNT,
+            "min_swap_amount": MIN_SWAP,
+            "offer_valid_seconds": 1200
+        }
+    ],
+    "bids": [],
+    "stealthex": [],
+    "min_seconds_between_offers": 10,
+    "max_seconds_between_offers": 10,
+    "min_seconds_between_bids": 10,
+    "max_seconds_between_bids": 10,
+    "num_enabled_offers": 1,
+    "num_enabled_bids": 0,
+    "num_enabled_swaps": 0
+}

bsx/placeorders/placeorders.sh

@@ -0,0 +1,329 @@
+#!/bin/bash
+############################
+###########################
+#set -x
+PORT=12700 # BasicSwapDex http port
+
+# config file location
+taker=placebid.json
+maker=placeoffer.json
+state=placeorders_state.json
+
+# Defaults
+ALLOW_SPLIT_ORDERS=true # Sane default TODO
+MAXBIDS=10 # TODO
+PERCENT=2.5 # Max slippage for "Market" order types
+
+# FUNC - dont touch
+BUYORSELL=""
+AMOUNT=""
+TAKER_RATE=""
+MAKER_RATE=""
+OB_MIN=""
+MIN_MAKER=""
+MIN_TAKER=""
+###########################
+############################
+
+# Colors
+cy="echo -e -n \e[36;1m"
+cy2="\e[36;1m"
+red="echo -e -n \e[31;1m"
+red2="\e[31;1m"
+grn="echo -e -n \e[32;1m"
+grn2="\e[32;1m"
+nc="echo -e -n \e[0m"
+nc2="\e[0m"
+
+# Choose Coins
+coin_prompt_buy() {
+	THEIR_COIN=$COIN
+	theircoin=$coinsymbol
+	theircapital=$coinname
+}
+coin_prompt_sell() {
+	YOUR_COIN=$COIN
+	yourcoin=$coinsymbol
+	yourcapital=$coinname
+}
+coin() {
+	coin=""
+	echo -e "\n[1] Bitcoin\n[2] Monero\n[3] Litecoin\n[4] Firo\n[5] Dash\n[6] PIVX\n[7] Particl\n[8] Wownero\n"
+	until [[ $coin =~ ^[1-8]$ ]]; do
+		read -p 'Select an option: ' coin
+		case $coin in
+			1) COIN="bitcoin"
+			   coinname="Bitcoin"
+			   coinsymbol="BTC"
+			;;
+			2) COIN="monero"
+			   coinname="Monero"
+			   coinsymbol="XMR"
+			;;
+			3) COIN="litecoin"
+			   coinname="Litecoin"
+			   coinsymbol="LTC"
+			;;
+			4) COIN="zcoin"
+			   coinname="Firo"
+			   coinsymbol="FIRO"
+			;;
+			5) COIN="dash"
+			   coinname="Dash"
+			   coinsymbol="DASH"
+			;;
+			6) COIN="pivx"
+			   coinname="PIVX"
+			   coinsymbol="PIVX"
+			;;
+			7) COIN="particl"
+			   coinname="Particl"
+			   coinsymbol="PART"
+			;;
+			8) COIN="wownero"
+			   coinname="Wownero"
+			   coinsymbol="WOW"
+			;;
+			*) $red "\nYou must answer 1-8\n"; $nc
+			;;
+		esac
+	done
+}
+
+book_min() {
+	if   [[ $coin = 1 ]]; then # BITCOIN
+		OB_MIN=0.0050
+		MIN_SWAP=0.0010
+	elif [[ $coin = 2 ]]; then # MONERO
+		OB_MIN=0.2000
+		MIN_SWAP=0.0300
+	elif [[ $coin = 3 ]]; then # LITECOIN
+		OB_MIN=0.4000
+		MIN_SWAP=0.0600
+	elif [[ $coin = 4 ]]; then # FIRO
+		OB_MIN=20.0000
+		MIN_SWAP=8.0000
+	elif [[ $coin = 5 ]]; then # DASH
+		OB_MIN=1.0000
+		MIN_SWAP=0.2000
+	elif [[ $coin = 6 ]]; then # PIVX
+		OB_MIN=50.0000
+		MIN_SWAP=10.0000
+	elif [[ $coin = 7 ]]; then # PARTICL
+		OB_MIN=50.0000
+		MIN_SWAP=10.0000
+	elif [[ $coin = 8 ]]; then # WOWNERO
+		OB_MIN=50.0000
+		MIN_SWAP=10.0000
+	fi
+}
+
+set_fiat() {
+	echo -e "[1] USD [default]\n[2] EUR\n[3] CAD\n[4] AUD\n[5] CUSTOM"
+	read -p 'Select an option: ' fiat_select
+	case $fiat_select in
+		1) FIAT=USD
+		   fiat=usd
+		;;
+		2) FIAT=EUR
+		   fiat=eur
+		;;
+		3) FIAT=CAD
+		   fiat=cad
+		;;
+		4) FIAT=AUD
+		   fiat=aud
+		;;
+		5) read -p 'Please enter the 3 character currency code [example: jpy] ' FIAT
+		   fiat=$FIAT
+		;;
+		*) FIAT=USD
+		   fiat=usd
+		;;
+	esac
+}
+
+coin_price() {
+	echo -e "\nCurrent Market Rates are.."
+	YOUR_FIAT=$(curl -s "https://api.coingecko.com/api/v3/simple/price?ids=$THEIR_COIN,$YOUR_COIN&vs_currencies=$fiat" | jq -r ".$YOUR_COIN.$fiat")
+	THEIR_FIAT=$(curl -s "https://api.coingecko.com/api/v3/simple/price?ids=$THEIR_COIN,$YOUR_COIN&vs_currencies=$fiat" | jq -r ".$THEIR_COIN.$fiat")
+	TAKER_RATE=$(echo "scale=8;( $THEIR_FIAT / $YOUR_FIAT )" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+	MAKER_RATE=$(echo "scale=8;(1 / $TAKER_RATE /1)" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+	$cy"$THEIR_FIAT $FIAT$nc2/$grn2$theircoin$nc2 which is $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin$nc2\n"
+	$cy"$YOUR_FIAT $FIAT$nc2/$red2$yourcoin$nc2 which is $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin$nc2\n";
+}
+
+buy_sell() {
+	echo -e "\n[1] BUY a specific amount of $grn2$theircapital$nc2\n[2] SELL a specific amount of your $red2$yourcapital$nc2\n"
+	until [[ $BUYORSELL =~ ^[12]$ ]]; do
+		read -p 'Select an option: ' BUYORSELL
+		case $BUYORSELL in
+			1) read -p "How much $theircapital do you want to BUY? [example: 1] " AMOUNT
+			   echo -e "\n4. Rate you will pay:"
+			   echo -e "[1] LIMIT: Specific Crypto Rate $red2$yourcoin$nc2/$grn2$theircoin$nc2\n[2] LIMIT: $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin $cy2+/- CUSTOM Percent$nc2\n[3] LIMIT: $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin$nc2\n[4] MARKET +$PERCENT%: $red2$TAKER_RATE $yourcoin$nc2/$grn2$theircoin $cy2+ $PERCENT%$nc2\n[ENTER] LIMIT: Specific Fiat Rate $cy2$FIAT$nc2/$grn2$theircoin$nc2"
+			   read -p 'Select an option: ' RATESEL
+			   case $RATESEL in
+				1) read -p $"At what rate would you like to Pay? [example: $TAKER_RATE] " RATE
+				   PRICE=$(echo "scale=2;( $YOUR_FIAT * $RATE )" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+				   PERCENT=0
+				;;
+				2) read -p 'Pay this much % above or below market [example: [0.5|-0.5] ' PERCENT
+				   RATE=$(echo "scale=8;( $TAKER_RATE * ( $PERCENT / 100 + 1)/1)" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+				   PRICE=$(echo "scale=2;( $YOUR_FIAT * $RATE )" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+				;;
+				3) RATE=$TAKER_RATE
+				   PRICE=$THEIR_FIAT
+				   PERCENT=0
+				;;
+				4) RATE=$(echo "scale=9;( $TAKER_RATE * ( $PERCENT / 100 + 1)/1)" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+				   PRICE=$(echo "scale=2;( $YOUR_FIAT * $RATE )" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+				;;
+				*) read -p $"Enter specific price in $FIAT to PAY? [example: "$THEIR_FIAT"] " PRICE
+				   RATE=$(echo "scale=8;( $PRICE / $YOUR_FIAT )" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+				   PERCENT=0
+				;;
+			   esac
+			   MAKER_RATE=$(echo "scale=8;( 1 / $RATE )" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+			   echo -e "\nPaying: $red2 $PRICE$FIAT$nc2 which is $red2($RATE $yourcoin$nc2/$grn2$theircoin$nc2)"
+			   echo -e "Rate to be paid: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin$nc2\n"
+			;;
+			2) read -p "How much YOUR $yourcapital do you want to SELL [example: 1] " AMOUNT
+			   echo -e "\n4. Rate to charge:\n"
+			   echo -e "[1] LIMIT: Specific Crypto Rate $grn2$theircoin$nc2/$red2$yourcoin$nc2\n[2] LIMIT: $grn2$MAKER_RATE  $theircoin$nc2/$red2$yourcoin $cy2+/- CUSTOM Percent$nc2\n[3] LIMIT: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin$nc2\n[4] MARKET +$PERCENT%: $grn2$MAKER_RATE $theircoin$nc2/$red2$yourcoin $cy2+ $PERCENT%$nc2\n[ENTER] LIMIT: Specific rate $cy2$FIAT$nc2/$red2$yourcoin$nc2"
+			   read -p 'Select an option: ' RATESEL
+			   case $RATESEL in
+				1) read -p $"Enter specific rate to Charge? [example: $MAKER_RATE] " RATE
+				   PRICE=$(echo "scale=2;( $THEIR_FIAT * $RATE )" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+				   PERCENT=0
+				;;
+				2) read -p 'Charge this much % above or below market [example: [0.5|-0.5] ' PERCENT
+				   RATE=$(echo "scale=8;( $MAKER_RATE * ( $PERCENT / 100 + 1)/1)" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+				   PRICE=$(echo "scale=2;( $THEIR_FIAT * $RATE )" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+				;;
+				3) RATE=$MAKER_RATE
+				   PRICE=$(echo "scale=8;( $THEIR_FIAT * $RATE )" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+				   PERCENT=0
+				;;
+				4) RATE=$(echo "scale=8;( $MAKER_RATE * ( $PERCENT / 100 + 1)/1)" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+				   PRICE=$(echo "scale=8;( $THEIR_FIAT * $RATE )" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+				;;
+				*) read -p $"Enter specific price in $FIAT to Charge? [example: "$YOUR_FIAT"] " PRICE
+				   RATE=$(echo "scale=8;( $PRICE / $THEIR_FIAT )" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+				   PERCENT=0
+				;;
+				esac
+			   TAKER_RATE=$(echo "scale=8;(1 / $RATE )" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+			   echo -e "Selling at $PRICE$FIAT which is a rate of $grn2$RATE $theircoin$nc2/$red2$yourcoin$nc2"
+			;;
+			*) $red "\nYou must answer 1 or 2\n"; $nc
+			;;
+		esac
+	done
+}
+
+# TODO // ENABLE SPLIT ORDERS
+split_orders() {
+	if [ $ALLOW_SPLIT_ORDERS = true ]; then
+		MIN_SWAP=$(echo "scale=0;( $AMOUNT / $MAXBIDS )/1" | bc)
+		echo -e "$cy2#TODO$nc2 Splitting into multiple bids if necessary. $red2$MAXBIDS$nc2 tx at most"
+	else
+		MIN_SWAP=$AMOUNT
+		$red"One order only. Not Recommended";$nc
+		echo "$MIN_SWAP"
+	fi
+}
+
+apply_config() {
+	# Convert amount
+	MIN_TAKER=$(echo "scale=8;( $MIN_SWAP * $MAKER_RATE )/1" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+	sed -i -z "s/MIN_SWAP/$MIN_TAKER/" $taker
+	sed -i -z "s/MIN_SWAP/$MIN_SWAP/" $maker
+	sed -i -z "s/COIN_TO_SELL/$yourcapital/" $taker $maker
+	sed -i -z "s/COIN_TO_BUY/$theircapital/" $taker $maker
+	sed -i -z "s/PERCENT/$PERCENT/" $maker
+	sed -i -z "s/MAXBIDS/$MAXBIDS/" $taker
+	echo -e "\nMinumum amt per swap	= $grn2$MIN_TAKER $theircoin$nc2"
+	echo -e "			= $red2$MIN_SWAP $yourcoin$nc2\n"
+	if [[ $BUYORSELL = 1 ]]; then
+		MAKERAMOUNT=$(echo "scale=8;( $AMOUNT / $MAKER_RATE )/1" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+		echo -e "Outgoing: $red2$MAKERAMOUNT $yourcoin$nc2"
+		echo -e "Incoming: $grn2~$AMOUNT $theircoin$nc2"
+		sed -i -z "s/AMOUNT/$MAKERAMOUNT/g" $maker
+		sed -i -z "s/RATE/$MAKER_RATE/" $maker
+		sed -i -z "s/RATE/$RATE/" $taker
+		sed -i -z "s/AMOUNT/$AMOUNT/g" $taker
+	else
+		TAKERAMOUNT=$(echo "scale=8;( $AMOUNT * $MAKER_RATE )/1" | bc | sed -e 's/^-\./-0./' -e 's/^\./0./')
+		echo -e "Outgoing: $red2$AMOUNT $yourcoin$nc2"
+		echo -e "Incoming: $grn2~$TAKERAMOUNT $theircoin$nc2"
+		sed -i -z "s/AMOUNT/$TAKERAMOUNT/g" $taker
+		sed -i -z "s/RATE/$TAKER_RATE/" $taker
+		sed -i -z "s/RATE/$RATE/" $maker
+		sed -i -z "s/AMOUNT/$AMOUNT/g" $maker
+	fi
+}
+
+revert_config() {
+	cp placeorders_state.json.template $state
+	cp placeoffer.json.template $maker
+	cp placebid.json.template $taker
+}
+
+check_bids() {
+	# oneshot. Check for matching offers before posting one
+	apply_config
+	FOUNDBID=$(python createoffers.py --configfile $taker --statefile $state --port=$PORT --oneshot --debug | grep "New bid")
+ 	if [[ $FOUNDBID ]]; then
+		$grn"Placed bid successfully! Check BasicSwapDEX to confirm\n";$nc
+	elif [[ $AMOUNT < $OB_MIN && -z $FOUNDBID ]]; then
+		echo -e "Checking for a matching offer"
+		echo -e "No matching offers found $red2:@ !!!$nc2\nBid quantity too$red2 low$nc2 to post to order book.\nTrying again in 30 seconds"
+		sleep 2
+		revert_config
+		sleep 30
+		apply_config
+		$cy"Rechecking bids\n";$nc
+		recheck_bids
+	else
+		# Post as limit order on the book
+		$cy"No matching offers found. Posting to the orderbook\n";$nc
+		ORDERPLACED=$(python createoffers.py --configfile $maker --statefile $state --port=$PORT --oneshot | grep "New offer")
+		if [[ $ORDERPLACED ]]; then
+			revert_config
+			$grn"OFFER POSTED! Please check BasicSwapDEX to confirm\n";$nc
+		else
+			revert_config
+			$red"Placing Order failed. Try again$nc2\n"
+		fi
+	fi
+}
+
+recheck_bids() {
+	check_bids
+	echo rechecking
+}
+
+# 1. Choose coins
+	revert_config
+	set_fiat
+
+	$grn"\n\nName of coin to buy";$nc
+	coin
+	coin_prompt_buy
+
+	$red"\n\nName of coin to sell";$nc
+	coin
+	coin_prompt_sell
+
+	echo -e "Buying: $grn2$theircapital$nc2"
+	echo -e "Selling: $red2$yourcapital$nc2"
+
+#2. Set rates
+# Pull Market rate
+	coin_price
+	buy_sell
+	# split_orders
+	book_min
+
+#3. Attempt bid / Post offer
+	check_bids

bsx/placeorders/placeorders_state.json.template

@@ -0,0 +1,6 @@
+{
+    "offers": {
+    },
+    "bids": {
+    }
+}