Commit graph

107 commits

Author SHA1 Message Date
moneromooo-monero
c6cfe0f26d
wallet: make the wallet refresh type a wallet setting
instead of a command line setting. It makes sense that is is
a long lived setting.
2015-12-05 21:44:25 +00:00
moneromooo-monero
fef2493617
wallet: default auto-refresh to true for old wallets 2015-12-05 21:10:12 +00:00
moneromooo-monero
41029d6d74
wallet2: default auto-refresh to true for preexisting wallets 2015-11-30 11:08:15 +00:00
moneromooo-monero
d68a63e404
wallet: cancellable refresh
^C while in manual refresh will cancel the refresh, since that's
often an annoying thing to have to wait for. Also, a manual refresh
command will interrupt any running background refresh and take
over, rather than wait for the background refresh to be done, and
look to be hanging.
2015-11-29 23:24:56 +00:00
Riccardo Spagni
5275db0786
Merge pull request #509
3030e3e wallet2: remove confirmed transactions from detached blocks (moneromooo-monero)
2015-11-30 00:23:58 +02:00
Riccardo Spagni
bc1bc4adb2
Merge pull request #507
62e49a5 wallet: optional automatic refresh from the daemon (moneromooo-monero)
2015-11-30 00:19:47 +02:00
moneromooo-monero
3030e3ecff
wallet2: remove confirmed transactions from detached blocks 2015-11-29 12:07:54 +00:00
moneromooo-monero
9ee48e9071
wallet2: speed up wallet refresh for large miners 2015-11-28 21:15:07 +00:00
moneromooo-monero
62e49a5f02
wallet: optional automatic refresh from the daemon
The daemon will be polled every 90 seconds for new blocks.
It is enabled by default, and can be turned on/off with
set auto-refresh 1 and set auto-refresh 0 in the wallet.
2015-11-28 12:41:06 +00:00
moneromooo-monero
490590306e
wallet2: parallelize pulling blocks and processing them on refresh
This needed locking the use of m_http_client, to avoid collisions
in I/O.
2015-11-27 17:25:15 +00:00
moneromooo-monero
d0eaf1d4e1
wallet2: maintain the short chain manually when refreshing 2015-11-27 00:35:41 +00:00
moneromooo-monero
a4e9506069
wallet2: split pull blocks between pulling and processing 2015-11-27 00:03:43 +00:00
moneromooo-monero
9b945f5211
wallet: make the refresh optimizations selectable via command line
Take the opportunity to add a no-coinbase case too, for even faster
sync when an address is known to never have mined to.
2015-11-22 19:03:10 +00:00
moneromooo-monero
d2c031332e
wallet: speedup refresh from daemon
Assume the whole of a coinbase goes to the same address (so that
if the first output isn't for us, none of it is), and only look
for payment id when we received something in the transaction.
2015-11-22 18:07:19 +00:00
moneromooo-monero
ea707c779c
wallet2: minor cleanup
- use std::vector::std::deque to not leak when exceptions happen
- use std::unique_ptr instead of the deprecated std::auto_ptr
2015-11-22 18:07:14 +00:00
moneromooo-monero
55a2da7475
wallet2: speedup refresh a bit
Use the NoodleDoodle threading technique to speedup a couple
code blocks on the main path when refreshing blocks without
any transactions for us.
2015-11-22 18:07:07 +00:00
moneromooo-monero
9156ba3a3c
wallet: rename store-tx-keys to store-tx-info
With backward compatibility
2015-11-22 12:26:27 +00:00
moneromooo-monero
b3d4d41e29
wallet: improve show_transfers
More information is now saved and displayed
2015-11-22 12:13:59 +00:00
moneromooo-monero
725ae4e710
wallet: use incoming blocks to keep track of payments too 2015-11-21 23:22:15 +00:00
moneromooo-monero
3f611bc3dc
wallet: track outgoing payments and add a show_transfers command
It's a user friendly display of incoming and outgoing transfers,
listed by height, within an optional height range.
2015-11-15 21:59:40 +00:00
moneromooo-monero
c7dc6ef8e8
simplewallet: add a set default-mixin command
The default default mixin is 4. It can now be changed per wallet.
2015-10-30 21:16:51 +00:00
moneromooo-monero
5f8baba26e
wallet2: fix CLANG compile error 2015-10-30 14:35:55 +00:00
moneromooo-monero
6df4e67cd2
Fix a possibly-unused warning, and rationalize types 2015-10-27 09:05:07 +00:00
moneromooo-monero
ecbb732faa
Fix leak on real output when using a very recent output
The wallet and the daemon applied different height considerations
when selecting outputs to use. This can leak information on which
input in a ring signature is the real one.

Found and originally fixed by smooth on Aeon.
2015-10-25 16:34:57 +00:00
moneromooo-monero
5ea2f936ae
wallet2: really include non canonical outputs in dust sweep 2015-10-14 00:58:08 +01:00
moneromooo-monero
ac90d488e7
from hard fork 2, all outputs must be decomposed
The wallet decomposes fully as of now too.
2015-10-11 13:02:55 +01:00
moneromooo-monero
d91eb8c7b4
wallet: only return tx keys via RPC if requested
To get the tx keys returned via RPC, set the "get_tx_key" or
"get_tx_keys" request field to true (defaults to false).
2015-08-24 17:36:44 +01:00
Riccardo Spagni
c24a7e8fc0
Merge pull request #381
f197599 wallet: encrypt the cache file (moneromooo-monero)
98c76a3 chacha8: add a key generation variant that take a pointer and size (moneromooo-monero)
2015-08-24 19:20:36 +02:00
moneromooo-monero
f19759992c
wallet: encrypt the cache file
It contains private data, such as a record of transactions.
The key is derived from the view and spend secret keys.

The encryption currently is one shot, so may require a lot of
memory for large wallet caches.
2015-08-22 21:04:50 +01:00
moneromooo-monero
6c995710d8
make tx keys available to the user
They are also stored in the cache file, to be retrieved using
a new get_tx_key command.
2015-08-19 21:11:48 +01:00
moneromooo-monero
aa5bc351d4
wallet: new rescan_spent command to update outputs' spent status
This obsoletes the need for a lengthy blockchain rescan when
a transaction doesn't end up in the chain after being accepted
by the daemon, or any other reason why the wallet's idea of
spent and unspent outputs gets out of sync from the blockchain's.
2015-08-11 15:55:08 +01:00
moneromooo-monero
a2d7a5fb49
encrypted payment ids are now 64 bit, instead of 256 bit
Pros:
 - smaller on the blockchain
 - shorter integrated addresses

Cons:
 - less sparseness
 - less ability to embed actual information

The boolean argument to encrypt payment ids is now gone from the
RPC calls, since the decision is made based on the length of the
payment id passed.
2015-08-09 10:13:51 +01:00
moneromooo-monero
e40cfc4e29
Encrypted payment IDs
A payment ID may be encrypted using the tx secret key and the
receiver's public view key. The receiver can decrypt it with
the tx public key and the receiver's secret view key.

Using integrated addresses now cause the payment IDs to be
encrypted. Payment IDs used manually are not encrypted by default,
but can be encrypted using the new 'encrypt_payment_id' field
in the transfer and transfer_split RPC calls. It is not possible
to use an encrypted payment ID by specifying a manual simplewallet
transfer/transfer_new command, though this is just a limitation
due to input parsing.
2015-08-09 10:13:41 +01:00
moneromooo-monero
1e23b7a11d
wallet: set watch-only flag to false when creating a new wallet 2015-08-04 09:34:10 +01:00
moneromooo-monero
988fe1f843
wallet: new transaction construction algorithm
It should avoid a lot of the issues sending more than half the
wallet's contents due to change.

Actual output selection is still random. Changing this would
improve the matching of transaction amounts to output sizes,
but may have non obvious effects on blockchain analysis.

Mapped to the new transfer_new command in simplewallet, and
transfer uses the existing algorithm.

To use in RPC, add "new_algorithm: true" in the transfer_split
JSON command. It is not used in the transfer command.
2015-07-22 19:24:30 +01:00
moneromooo-monero
8fe180ab80
wallet: add boolean to always confirm transactions with the user
This can be useful if you want to be given a veto over the tx fee,
or if you want to see what a tx fee would be without actually sending.
2015-07-18 22:11:53 +01:00
Riccardo Spagni
4790db9d04
Merge pull request #324
dc4dbc1 simplewallet: allow creating a wallet from a public address and view secret key (moneromooo-monero)
6a0f61d account: allow creating an account from a public address and view secret key (moneromooo-monero)
e05a58a wallet2: fix write_watch_only_wallet comment description (moneromooo-monero)
4bf6f0d simplewallet: forbid seed commands for watch only wallets (moneromooo-monero)
2015-06-20 22:40:47 +02:00
moneromooo-monero
dc4dbc1ceb
simplewallet: allow creating a wallet from a public address and view secret key
The needed information is supplied via a triple:

--generate-from-view-key address:viewkey:filename
2015-06-20 17:33:14 +01:00
moneromooo-monero
e05a58aead
wallet2: fix write_watch_only_wallet comment description 2015-06-20 12:30:31 +01:00
moneromooo-monero
2952ffd80f
wallet2: use the same exponential splitting for normal txes 2015-06-17 22:00:04 +01:00
moneromooo-monero
7c8d3be656
wallet2: try to split dust sweep txs exponentially
This ensures even massive wallets full of dust can sweep.
2015-06-17 21:31:16 +01:00
moneromooo-monero
c882af63c1
wallet: add watch only wallet support
The new save_watch_only saves a copy of the keys file without the
spend key. It can then be given away to be used as a normal keys
file, but with no spend ability.
2015-05-31 15:34:55 +01:00
moneromooo-monero
3204f0d536
wallet: add a sweep_dust command
Sends all the dust to your own wallet. May fail (if the fee required
is more than the dust total). May end up paying most of the dust in fees.
Unlocked dust total is now also displayed in "balance".
2015-05-30 21:47:56 +01:00
moneromooo-monero
09324764c0
wallet: add consts where appropriate
because const is always appropriate
2015-05-27 19:16:22 +01:00
warptangent
fee8424938
Allow name@domain.tld for OpenAlias lookups
Based on tewinget's update.
Make OpenAlias address format independent of existing DNS functions.

Add tests.

Test:

make debug-test
cd build/debug/tests/unit_tests
# test that regular DNS functions work, including IPv4 lookups.
# also test function that converts OpenAlias address format
make && ./unit_tests --gtest_filter=DNSResolver*
# test that OpenAlias addresses like donate@getmonero.org work from
# wallet tools
make && ./unit_tests --gtest_filter=AddressFromURL.Success
2015-05-19 02:56:04 -07:00
moneromooo-monero
87839cd484
Allow get_bulk_payments to return all payments regardless of payment ID
by giving an empty list of payment IDs.
2015-01-11 12:04:05 +00:00
Riccardo Spagni
f4b69d553a
year updated in license 2015-01-02 18:52:46 +02:00
Riccardo Spagni
f4675dc05d
Merge pull request #203
583cf0a Document existing function (warptangent)
95eb944 Repeat prompt for wallet path if invalid (warptangent)
2014-12-13 13:52:30 +02:00
Riccardo Spagni
c3ec723882
Merge pull request #202
d7aafd5 wallet2::rewrite update to not require bin file (warptangent)
2014-12-13 13:52:03 +02:00
Riccardo Spagni
c1bf8fb94b
Merge pull request #201
9b7e0a0 wallet2::load correctly initialize m_blockchain for wallet loaded without bin file (warptangent)
2014-12-13 13:51:42 +02:00