Since we are required to check for uniqueness of decoy picks within any given
ring, and since some decoy picks may fail due to unlock time or malformed EC points,
the wallet2 decoy selection code was building up a larger than needed *unique* set of
decoys for each ring according to a certain distribution *without replacement*. After
filtering out the outputs that it couldn't use, it chooses from the remaining decoys
uniformly random *without replacement*.
The problem with this is that the picks later in the picking process are not independent
from the picks earlier in the picking process, and the later picks do not follow the
intended decoy distribution as closely as the earlier picks. To understand this
intuitively, imagine that you have 1023 marbles. You label 512 marbles with the letter A,
label 256 with the letter B, so on and so forth, finally labelling one marble with the
letter J. You put them all into a bag, shake it well, and pick 8 marbles from the bag,
but everytime you pick a marble of a certain letter, you remove all the other marbles
from that bag with the same letter. That very first pick, the odds of picking a certain
marble are exactly how you would expect: you are twice as likely to pick A as you are B,
twice as likely to pick B as you are C, etc. However, on the second pick, the odds of
getting the first pick are 0%, and the chances for everything else is higher. As you go
down the line, your picked marbles will have letters that are increasingly more unlikely
to pick if you hadn't remove the other marbles. In other words, the distribution of the
later marbles will be more "skewed" in comparison to your original distribution of marbles.
In Monero's decoy selection, this same statistical effect applies. It is not as dramatic
since the distribution is not so steep, and we have more unique values to choose from,
but the effect *is* measureable. Because of the protocol rules, we cannot have duplicate
ring members, so unless that restriction is removed, we will never have perfectly
independent picking. However, since the earlier picks are less affected by this
statistical effect, the workaround that this commit offers is to store the order that
the outputs were picked and commit to this order after fetching output information over RPC.
The Monero GUI code was calling `Monero::wallet::setPassword()` on every open/close for some reason,
and the old `store_to()` code called `store_keys()` with `watch_only=false`, even for watch-only wallets.
This caused a bug where the watch-only keys file got saved with with the JSON field `watch_only` set to 0,
and after saving a watch-only wallet once, a user could never open it back up against because `load()` errored out.
This never got brought up before this because you would have to change the file location of the watch-only
wallet to see this bug, and I guess that didn't happen often, but calling the new `store_to()` function with the
new `force_rewrite` parameter set to `true` triggers key restoring and the bug appeared.
Resolves#8932 and:
2. Not storing cache when new path is different from old in `store_to()` and
3. Detecting same path when new path contains entire string of old path in `store_to()` and
4. Changing your password / decrypting your keys (in this method or others) and providing a bad original password and getting no error and
5. Changing your password and storing to a new file
eeda4a8 wallet2: do not lose exception in current thread on refresh (Crypto City
f868768 wallet2: fix missing exceptions from failing wallet refresh (Crypto City)
- Detach & re-process txs >= lowest scan height
- ensures that if a user calls scan_tx(tx1) after scanning tx2,
the wallet correctly processes tx1 and tx2
- if a user provides a tx with a height higher than the wallet's
last scanned height, the wallet will scan starting from that tx's
height
- scan_tx requires trusted daemon iff need to re-process existing
txs: in addition to querying a daemon for txids, if a user
provides a txid of a tx with height *lower* than any *already*
scanned txs in the wallet, then the wallet will also query the
daemon for all the *higher* txs as well. This is likely
unexpected behavior to a caller, and so to protect a caller from
revealing txid's to an untrusted daemon in an unexpected way,
require the daemon be trusted.
Before this change, if a multisig peer asked you to sign a transaction with a frozen enote, the wallet will do it without any error or warning. This change makes it
so that wallets will refuse to sign multisig transactions with frozen enotes.
Disclaimer: This PR was generously funded by @LocalMonero.
Ensures both transfers and sweeps use a fee that's calculated
from the tx's weight. Using different logic could theoretically
enable distinguishability between the two types of txs. We don't
want that.
The gamma picker and the caller code did not quite agree on the
number of rct outputs available for use - by one block - which
caused an infinite loop if the picker could never pick outputs
from that block but already had picked all other outputs from
previous blocks.
Also change the range to select from using code from UkoeHB.
c4af33e Enforce restricted # pool txs served via RPC + optimize chunked reqs (j-berman)
9752116 wallet2, RPC: Optimize RPC calls for periodic refresh from 3 down to 1 call (rbrunner7)
- `/getblocks.bin` respects the `RESTRICTED_TX_COUNT` (=100) when
returning pool txs via a restricted RPC daemon.
- A restricted RPC daemon includes a max of `RESTRICTED_TX_COUNT` txs
in the `added_pool_txs` field, and returns any remaining pool hashes
in the `remaining_added_pool_txids` field. The client then requests
the remaining txs via `/gettransactions` in chunks.
- `/gettransactions` no longer does expensive no-ops for ALL pool txs
if the client requests a subset of pool txs. Instead it searches for
the txs the client explicitly requests.
- Reset `m_pool_info_query_time` when a user:
(1) rescans the chain (so the wallet re-requests the whole pool)
(2) changes the daemon their wallets points to (a new daemon would
have a different view of the pool)
- `/getblocks.bin` respects the `req.prune` field when returning
pool txs.
- Pool extension fields in response to `/getblocks.bin` are optional
with default 0'd values.
- Straight-forward call interface: `void rx_slow_hash(const char *seedhash, const void *data, size_t length, char *result_hash)`
- Consensus chain seed hash is now updated by calling `rx_set_main_seedhash` whenever a block is added/removed or a reorg happens
- `rx_slow_hash` will compute correct hash no matter if `rx_set_main_seedhash` was called or not (the only difference is performance)
- New environment variable `MONERO_RANDOMX_FULL_MEM` to force use the full dataset for PoW verification (faster block verification)
- When dataset is used for PoW verification, dataset updates don't stall other threads (verification is done in light mode then)
- When mining is running, PoW checks now also use dataset for faster verification
- fix integrated address test, it was not testing integrated address suport
- fix trezor test build as dependent classes were changed
- add a friend test class for Monero::WalletImpl to support wallet api tests
When using wallet_api in tests, synthetic chain is used. Without being able to set `allow_mismatched_daemon_version` in the underlying wallet, we are not able to use a synthetic chain with the tests
23fde15 wallet_rpc_server: chunk refresh to keep responding to RPC while refreshing (moneromooo-monero) 5bb2369 wallet_rpc_server: add --no-initial-sync flag for quicker network binding (moneromooo-monero)
959a3e6 wallet2: ensure imported outputs subaddresses are created (moneromooo-monero)
a098504 wallet2: better test on whether to allow output import (moneromooo-monero)
c5579ac allow exporting outputs in chunks (moneromooo-monero)
1e912ec wallet2: fixes for export/import output flow (j-berman)
692f1d4 wallet2: do not assume imported outputs must be non empty (moneromooo-monero)
67b6d6a wallet2: prevent importing outputs in a hot wallet (moneromooo-monero)
d9fc666 wallet2: fix missing subaddress indices in 'light' exported outputs (moneromooo-monero)
- spend secret key is no longer the sum of multisig key shares;
no need to check that is the case upon restore.
- restoring a multisig wallet from multisig info means that the
wallet must have already completed all setup rounds. Upon restore,
set the number of rounds completed accordingly.
600de07 wallet_rpc_server: longer timeout for stop_mining (moneromooo-monero)
ac6db92 functional_tests: silence the cpu power test program (moneromooo-monero)
Being offline is not a good enough heuristic, so we keep track
of whether the wallet ever refreshed from a daemon, which is a
lot better, and probably the best we can do without manual user
designation (which would break existing cold wallet setups till
the user designates those wallets)
That RPC will wait for mining to actually stop, which can be a while
if randomx has just started on randomx_init_dataset.
This fixes occasional failures in the mining functional test
hash_extra: don't test for success in `jh_hash` and `skein_hash` since its guaranteed
device_ledger: move anonymous global variable apdu_verbose into .cpp file
Add comments to `refreshed` method variable in wallet2
