Fixes compile error when building with OpenSSL v1.1:
contrib/epee/include/net/net_helper.h: In member function ‘void epee::net_utils::blocked_mode_client::shutdown_ssl()’:
contrib/epee/include/net/net_helper.h:579:106: error: ‘SSL_R_SHORT_READ’ was not declared in this scope
if (ec.category() == boost::asio::error::get_ssl_category() && ec.value() != ERR_PACK(ERR_LIB_SSL, 0, SSL_R_SHORT_READ))
^
contrib/epee/include/net/net_helper.h:579:106: note: suggested alternative: ‘SSL_F_SSL_READ’
See boost/asio/ssl/error.hpp.
Boost handles differences between OpenSSL versions.
cmake: fail if Boost is too old for OpenSSL v1.1
The commands handler must not be destroyed before the config
object, or we'll be accessing freed memory.
An earlier attempt at using boost::shared_ptr to control object
lifetime turned out to be very invasive, though would be a
better solution in theory.
15e62581 connection_context: initialize m_callback_request_count to 0 (moneromooo-monero)
5fa199c6 copyable_atomic: add a ctor with initial value (moneromooo-monero)
- internal nullptr checks
- prevent modifications to network_address (shallow copy issues)
- automagically works with any type containing interface functions
- removed fnv1a hashing
- ipv4_network_address now flattened with no base class
792ba4f0 Log categories can now be added to and removed from (moneromooo-monero)
48f92eb6 easylogging++: add categories getter (moneromooo-monero)
f35afe62 epee: factor log level/categories setting (moneromooo-monero)
ef005f5e p2p: add a couple early outs when the stop signal is received (moneromooo-monero)
80d361c7 abstract_tcp_server2: improve tracking/cancelling of early connections (moneromooo-monero)
close might end up dropping a ref, ending up removing the
connection from m_connects, as the lock is recursive. This'd
cause an out of bounds exception and kill the idle connection
maker thread
df0cffed cryptonote_protocol: warn if we see a higher top version we expect (moneromooo-monero)
317ab21a cryptonote_protocol: less strict check on top version on connect (moneromooo-monero)
cc81a371 cryptonote_protocol: update target height when syncing too (moneromooo-monero)
e2ad372b cryptonote_protocol: simplify and remove unnecessary casts (moneromooo-monero)
727e67ca cryptonote_protocol: print peer top height along with its version (moneromooo-monero)
b5345ef4 crypto: use malloc instead of alloca (moneromooo-monero)
80794b31 thread_group: set thread size to THREAD_STACK_SIZE (moneromooo-monero)
5524bc31 print peer id in 0 padded hex for consistency (moneromooo-monero)
8f8cc09b contrib: add sync_info to rlwrap command set (moneromooo-monero)
70b8c6d7 cryptonote_protocol: misc fixes to the new sync algorithm (moneromooo-monero)
We don't actually need to keep them past the call to start, as this
adds them to the config object list, and so they'll then be cancelled
already when the stop signal arrives. This allows removing the periodic
call to cleanup connections.
b7d6ec83 simplewallet: add (out of sync) or (no daemon) markers in the prompt (moneromooo-monero)
fa23a500 wallet2: add a is_synced function (moneromooo-monero)
f1307bbd node_rpc_proxy: add a proxy for target height (moneromooo-monero)
5d4ef719 core: speed up output index unique set calculation (moneromooo-monero)
19d7f568 perf_timer: allow profiling more granular than millisecond (moneromooo-monero)
bda8c598 epee: add nanosecond timer and pause/restart profiling macros (moneromooo-monero)
dc0b312f wallet_rpc_server: optionally return tx blobs on transfer calls (moneromooo-monero)
5eb79983 epee: add a KV_SERIALIZE variant for optional parameters (moneromooo-monero)
A block queue is now placed between block download and
block processing. Blocks are now requested only from one
peer (unless starved).
Includes a new sync_info coommand.
Nanosecond timer precision won't work on Windows, but we don't
care since I'm using that just for profiling incremental code
paths, but a Windows coder is welcome to add it if there's a way.
This was the case for monero-wallet-cli already, but not for
monerod, which was making it pretty spammy as it was duplicating
intended output. Since my original intent was to ensure logs
included command output for debugging, this achieves both.
76043b17 monero-wallet-cli: hang on exit in readline code (#2117) (moneromooo-monero)
a73a42a6 monero-wallet-cli: hang on exit in readline code (#2117) (moneromooo-monero)
be9d4f04 Fix multiline wallet cli output with readline (Jethro Grassie)
readline_buffer: fix start/stop threads being starved by process
process could run for quite some time re-acquiring the process
lock, leaving start/stop starving. Yielding after unlock in
process is much better but doesn't seem to be enough to reliably
yield, so we sleep for a millisecond, which should be transparent
for user input anyway.
Signed-off-by: Jethro Grassie <jtg@xtrabass.com>
monero-wallet-cli commands which have multine output sometimes causes
issues with the readline support. This patch fixes show_transfers,
payments and incoming_transfers.
Existing tests: block, transaction, signature, cold outputs,
cold transaction.
Data for these is in tests/data/fuzz.
A convenience shell script is in contrib/fuzz_testing/fuzz.sh, eg:
contrib/fuzz_testing/fuzz.sh signature
The fuzzer will run indefinitely, ^C to stop.
Fuzzing is currently supported for GCC only. I can't get CLANG
to build Monero here as it dies on some system headers, so if
someone wants to make it work on both, that'd be great.
In particular, the __AFL_LOOP construct should be made to work
so that a given run can fuzz multiple inputs, as the C++ load
time is substantial.
07c4276c Don't issue a new timedsync while one is already in progress (Howard Chu)
cf3a376c Don't timeout a slow operation that's making progress (Howard Chu)
340830de Fix PR#2039 (Howard Chu)
It'd eat up a core constantly, due to spending its time jumping
back and forth between userland and kernel. We now wait for up
to a millisecond in kernel, which will be transparent to the user
and drop to idle most of the time.
This PR adds readline support to the daemon and monero-wallet-cli. Only
GNU readline is supported (e.g. not libedit) and there are cmake checks
to ensure this.
There is a cmake variable, Readline_ROOT_DIR that can specify a
directory to find readline, otherwise some default paths are searched.
There is also a cmake option, USE_READLINE, that defaults to ON. If set
to ON, if readline is not found, the build continues but without
readline support.
One negative side effect of using readline is that the color prompt in
the wallet-cli now has no color and just uses terminal default. I know
how to fix this but it's quite a big change so will tackle another time.
A timedsync is issued every minute on a connection, but the input
tineout is 2 minutes. This means a new sync request could be issued
while a slow sync request was already in progress. The additional
request will further clog the network on a slow connection, and
cause a premature timeout.
All code which was using ip and port now uses a new IPv4 object,
subclass of a new network_address class. This will allow easy
addition of I2P addresses later (and also IPv6, etc).
Both old style and new style peer lists are now sent in the P2P
protocol, which is inefficient but allows peers using both
codebases to talk to each other. This will be removed in the
future. No other subclasses than IPv4 exist yet.
- Performance improvements
- Added `span` for zero-copy pointer+length arguments
- Added `std::ostream` overload for direct writing to output buffers
- Removal of unused `string_tools::buff_to_hex`
Because some people just won't even try to read what is written
and freak out because the word FATAL is in here, despite the
context making it clear it's not an error.
8bdc86be protocol: speed up sync by minimizing duplicate work (moneromooo-monero)
61dfa310 epee: fix some log macros not printing context nicely (moneromooo-monero)
c02e1cb9 Updates to epee HTTP client code - http_simple_client now uses std::chrono for timeouts - http_simple_client accepts timeouts per connect / invoke call - shortened names of epee http invoke functions - invoke command functions only take relative path, connection is not automatically performed (Lee Clagett)
- http_simple_client now uses std::chrono for timeouts
- http_simple_client accepts timeouts per connect / invoke call
- shortened names of epee http invoke functions
- invoke command functions only take relative path, connection
is not automatically performed
