Commit graph

89 commits

Author SHA1 Message Date
Miguel Herranz
6bdd3a59b5 Use set_peer_just_seen to keep last_seen updated 2017-01-21 10:11:32 +01:00
Miguel Herranz
82dbeedd1b Add gray peer list housekeeping system
A random peer from the gray peer list is selected and a connection is
made to check if the peer is alive.

If the connection and handshake are successful the peer is promoted to
the white peer list, in case of failure the peer is evicted from the
gray peer list.

The connection is closed after the check in either case.
2017-01-21 10:09:38 +01:00
Riccardo Spagni
d10425025a
Merge pull request #1572
0e0e6c5f Reduce to one connection per IP (Miguel Herranz)
3f269e98 Limit incoming connections from the same IP (Miguel Herranz)
2017-01-20 20:54:04 -05:00
Miguel Herranz
0e0e6c5f39 Reduce to one connection per IP 2017-01-16 18:16:32 +01:00
moneromooo-monero
5833d66f65
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.

To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:

This one is (mostly) silent, only outputting fatal errors:

MONERO_LOGS=*:FATAL

This one is very verbose:

MONERO_LOGS=*:TRACE

This one is totally silent (logwise):

MONERO_LOGS=""

This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):

MONERO_LOGS=*:WARNING,verify:FATAL

Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE

Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:

MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE

Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.

Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.

The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-16 00:25:46 +00:00
Miguel Herranz
3f269e988c Limit incoming connections from the same IP 2017-01-15 12:11:27 +01:00
kenshi84
2ac8007544 also use portable serializer for boost_serialization_helper.h and net_node.inl, completely adandon boost/archive/binary_oarchive.hpp 2016-12-20 13:04:19 +09:00
Riccardo Spagni
f2ea2afb77
Merge pull request #1398
f4772bae Fix a few minor typos (Pierre Boyer)
2016-12-04 22:28:22 +02:00
Riccardo Spagni
8086379680
Merge pull request #1397
3f7d6fb5 Fix delayed exit when syncing (moneromooo-monero)
2016-12-04 22:27:41 +02:00
Riccardo Spagni
4a0be41dfe
Merge pull request #1396
7c0dd5e4 net_node: drop connections from banned IPs after looping through connections (moneromooo-monero)
2016-12-04 22:26:12 +02:00
Pierre Boyer
f4772bae81 Fix a few minor typos 2016-12-04 14:13:54 +01:00
moneromooo-monero
3f7d6fb57d
Fix delayed exit when syncing 2016-12-04 12:27:45 +00:00
moneromooo-monero
7c0dd5e46c
net_node: drop connections from banned IPs after looping through connections
This keeps the connections lock just for the time of looping
and adding connectoins to a list, and the dropping happens
after it. This should avoid lengthy delays waiting for the
connections lock.
2016-12-03 11:20:48 +00:00
moneromooo-monero
4adde0423b
p2p: possibly fix crash in relay_blocks 2016-12-01 23:52:16 +00:00
moneromooo-monero
17b6bd6d35
Fix DNS failures in offline mode preventing daemon startup 2016-11-23 23:14:49 +00:00
Dion Ahmetaj
d61bd8187e add lightweight block propagation ("fluffy blocks")
Added a new command to the P2P protocol definitions to allow querying for support flags.

Implemented handling of new support flags command in net_node. Changed for_each callback template to include support flags. Updated print_connections command to show peer support flags.

Added p2p constant for signaling fluffy block support.

Added get_pool_transaction function to cryptnote_core.

Added new commands to cryptonote protocol for relaying fluffy blocks.

Implemented handling of fluffy block command in cryptonote protocol.

Enabled fluffy block support in node initial configuration.

Implemented get_testnet function in cryptonote_core.

Made it so that fluffy blocks only run on testnet.
2016-11-09 14:24:27 -05:00
moneromooo-monero
e57379a819
p2p: drop any existing connection to a banned IP 2016-10-02 19:23:35 +01:00
Riccardo Spagni
70bd7d8871
remove dead backup seed nodes, add new ones 2016-09-18 20:10:46 +02:00
moneromooo-monero
c2ad9caf01
allow peers without port
The default port is then used
2016-07-03 12:51:12 +01:00
moneromooo-monero
7450656bf3
net_node: fix connection leak when ping fails with bad response
If there is no comms error, but the response is not as expected,
close would not be called.
2016-04-17 11:24:07 +01:00
Howard Chu
b937a2c915 Use boost::thread instead of std::thread
and all other associated IPC
2016-03-11 15:09:50 +00:00
Howard Chu
7c86c5997d Use boost::thread instead of std::thread
std::thread crashes on (at least) ARMv6 g++ 4.8/4.9
2016-02-18 21:30:10 +00:00
binaryFate
0100e951d3 'max limit of...' is redundant wording, rephrase 2016-01-14 23:13:12 +01:00
Riccardo Spagni
de03926850
updated copyright year 2015-12-31 08:39:56 +02:00
moneromooo-monero
17ff6f2114
net_node: fix a hang on exit
One loop was not paying attention to the stop signal, and could
end up looping forever
2015-12-22 12:38:52 +00:00
moneromooo-monero
3f2970fadb
Add missing semicolons after log statements 2015-12-19 14:47:37 +00:00
Riccardo Spagni
64ff3c7201
Merge pull request #543
63cb1a5 move another non user useful log to L1 (moneromooo-monero)
02827d5 p2p: minor log formatting fix (moneromooo-monero)
2015-12-18 12:16:10 +02:00
moneromooo-monero
02827d5155
p2p: minor log formatting fix 2015-12-17 22:35:01 +00:00
warptangent
725acc7f17
Replace tabs with two spaces for consistency with rest of codebase
Remove trailing whitespace in same files.
2015-12-15 06:22:06 -08:00
Riccardo Spagni
e175205e6e
Merge pull request #527
336b375 Register daemon command line arguments to core if they're used in core (moneromooo-monero)
2015-12-09 10:30:20 +02:00
moneromooo-monero
336b37580f
Register daemon command line arguments to core if they're used in core
This fixes coretests, which does not register daemon specific arguments,
but uses core, which uses those arguments. Also gets rid of an unwanted
dependency on daemon code from core.
2015-12-08 23:06:29 +00:00
Riccardo Spagni
b87f073a60
Merge pull request #526
2c83055 net_node: add a --offline argument (moneromooo-monero)
2015-12-08 20:12:18 +02:00
moneromooo-monero
2c83055597
net_node: add a --offline argument
It will not try to connect to the monero network, nor listen
2015-12-07 20:21:45 +00:00
moneromooo-monero
34e388949d
p2p: failure to load p2pstate.bin is not fatal anymore
Clear any partially loaded data, and start with a default config
2015-12-07 00:20:56 +00:00
moneromooo-monero
38ceb73848
add RPC calls and commands to get/set bans 2015-11-26 00:04:22 +00:00
moneromooo-monero
7bc4dce6ed
net_node: allow bans for custom amounts of time
m_blocked_ips now stores the unblocking time, rather than the
blocking time.
Also change > to >=, since banning for 0 seconds should not ban
2015-11-25 22:23:04 +00:00
Javier Smooth
4cea2b13b2 Add IP blocking for misbehaving nodes (adapted from Boolberry)
With minor cleanup and fixes (spelling, indent) by moneromooo
2015-11-23 18:06:20 +00:00
Javier Smooth
9c64b12320 quiet down p2p logging a bit 2015-11-23 17:20:47 +00:00
warptangent
ee27559724
Update to compile with latest miniupnpc
upnpDiscover() takes a new argument for TTL.
Use the suggested default of 2.
2015-10-05 17:07:52 -07:00
warptangent
7424cfc7b8
net_node: Use DNS resolver singleton
Each thread can use the same resolver.
2015-08-14 21:05:43 -07:00
moneromooo-monero
7764cd7006
net_node: skimplify rate limit code, and log as appropriate 2015-08-11 20:32:48 +01:00
NoodleDoodleNoodleDoodleNoodleDoodleNoo
e5d2680094 ** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).

Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.

LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5

ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.

[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
   This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.

[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
	a. 0 = Compute long hash per block (may take a while depending on CPU)
	b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
	a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
	b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
	Fast    - Write meta-data but defer data flush.
	Fastest - Defer meta-data and data flush.
	Sync    - Flush data after nblocks_per_sync and wait.
	Async   - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
        Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
	Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
	For berkeley-db only. Auto remove logs if enabled.

**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
	At the moment, you need a full resync to use this optimized version.

[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.

Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block

**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop,  Quad-core / 8-threads 2600k  (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop,   Dual-core / 4-threads U4200  (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).

lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop,  Quad-core / 8-threads 2600k  (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).

berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k  (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).

berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-15 23:20:16 -07:00
Riccardo Spagni
8cd6072090
Merge pull request #292
c44755a Build seed node list without duplicates (warptangent)
2015-05-26 10:45:20 +02:00
warptangent
696225321f
Fix compile for GCC 5.1.0
Add fix for compile error with multiple uses of peerid_type (uint64_t)
variable in lambda expression.
- known GCC issue: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65843

epee: replace return value of nullptr for expected boolean with false.

Fixes #231.
2015-05-25 22:18:36 -07:00
warptangent
c44755a5e2
Build seed node list without duplicates
The random selection of a node shouldn't favor repeats that occur in the
hardcoded and DNS seed node lists.

Remove hardcoded ":18080" address which gives parse error.

Test: bitmonerod --log-level 2

The seed node list displayed at startup shouldn't show duplicate
addresses (includes port).
2015-05-25 22:11:44 -07:00
Sergey Kazenyuk
867e98d739 Merge branch 'clang_fixes' into clang_fixes-master 2015-05-06 19:10:51 +03:00
Sergey Kazenyuk
2ff0d757eb Fix missing virtual destructor 2015-04-20 20:17:11 +03:00
Riccardo Spagni
6f0d93097e
Merge pull request #252
618f20c Network 1.7; Quieted the debug a bit. (rfree2monero)
391c7f9 Utils: use const, document dbg. Less default debug (rfree2monero)
44f4234 [fix] mac os x includes std::random... (rfree2monero)
162c993 Network 1.6: network limits, logging, +doxy (rfree2monero)
a3b2226 my changelog (rfree2monero)
2900b1e doxygen files (rfree2monero)
1489310 doxygen related tool (rfree2monero)
f9dba47 added windows_stream.* console colors (rfree2monero)
c511abf remerged; commands JSON. logging upgrade. doxygen (rfree2monero)
f79821a fix locking in count-peers thread (2) (rfree2monero)
0198ffb 2014 network limit 1.3 fix log/path/data +utils (rfree2monero)
ae2a506 2014 network limit 1.2 +utils +toc -doc -drmonero (rfree2monero)
0f06dca fixed size_t on windows (rfree2monero)
39fc63f removed not needed <netinet/in.h> (rfree2monero)
5ce4256 2014 network limit 1.1 +utils +toc -doc -drmonero (rfree2monero)
eabb519 2014 network limit 1.0a +utils +toc -doc -drmonero (rfree2monero)
2015-04-02 17:43:43 +02:00
Riccardo Spagni
0823c98bbc
update hardcoded fallback seeds 2015-04-02 11:28:20 +02:00
rfree2monero
c511abf005 remerged; commands JSON. logging upgrade. doxygen 2015-04-01 19:00:45 +02:00