iDunk5400
b2ac939eb3
Fix GUI building after libcryptonote_core was split ( #1626 )
2017-02-11 17:00:55 +01:00
moneromooo-monero
f2986ccfc1
db_lmdb: fix bad height saved in tx data
...
The recent change to not keep separate track of the blockchain
height caused the reported height to jump early in the lmdb
transaction (when the block data is added to the blocks table),
rather than at the end, after everything succeeded. Since the
block data is added before the transaction data, this caused
the transaction data to be saved with a height one more than
its expected value.
Fix this by saving the block data last. This should have no
side effects.
2017-02-11 10:16:18 +00:00
Dion Ahmetaj
ad95e65028
Added a note about smart mining to status command. Fixed up a bug where I was resetting bg mining enabled instead of started. Upped the miner threshold. Also moved setting of enabled on start above miner thread creation since starting with true, then stopping, then starting with false resulted in race condition.
2017-02-10 18:07:43 -05:00
Dion Ahmetaj
e4dfd2fb63
Changed ac_line_status to on_battery_power.
2017-02-10 18:07:42 -05:00
Dion Ahmetaj
23c73269ca
Use defined directive to silence pre-proc warnings.
2017-02-10 18:07:41 -05:00
Dion Ahmetaj
d2c7d0f6b0
Cleaned up some logging. Thanks to moneromooo for help.
2017-02-10 18:07:41 -05:00
Dion Ahmetaj
68652cd94d
Added some //TODO comments pertaining to returning enums instead of bools in order to be better able to handle failure states.
2017-02-10 18:07:41 -05:00
Dion Ahmetaj
0b1045ed7d
Moved around checking of AC power in order to bail quicker to sleep if not plugged in.
2017-02-10 18:07:40 -05:00
Dion Ahmetaj
2937fdbbbf
Moved setting of previous process times to block where background mining is started, and added an explicit sleep in that block to wait for some mining to occur.
2017-02-10 18:07:40 -05:00
Dion Ahmetaj
21a1e0252f
Set background mining started bool to false on bg thread start. If mining::stop then mining::start, idle logic is re-run instead of starting immediately (if it was running before stop).
2017-02-10 18:07:39 -05:00
Dion Ahmetaj
345ed4823c
Background/smart mining. If a users' computer is plugged into a power
...
source, and CPU has been idle for some time, then begin mining to some
threshold (don't destroy the users' CPU).
This patch only supports windows and linux (I've only tested on Win64 and
Ubuntu).
The variables currently default to pretty conservative values (i.e. 20%
CPU mining threshold).
2017-02-10 18:07:39 -05:00
Riccardo Spagni
cb54eeaa31
Merge pull request #1698
...
9459f331
2017-02-11 00:54:30 +02:00
Riccardo Spagni
eacf2124b6
Merge pull request #1689
...
ce7fcbb4
2017-02-11 00:35:25 +02:00
Riccardo Spagni
9296960081
Merge pull request #1686
...
bceaf4b7
2017-02-11 00:22:17 +02:00
Riccardo Spagni
9781ecaa70
Merge pull request #1685
...
7549116e
2017-02-11 00:21:51 +02:00
Riccardo Spagni
4feaa790e2
Merge pull request #1680
...
db0a5392
2017-02-11 00:21:12 +02:00
kenshi84
9459f33178
simplewallet: print error when address is wrong
2017-02-08 23:04:48 +09:00
kenshi84
8027ce0c75
extract some basic code from libcryptonote_core into libcryptonote_basic
2017-02-08 22:45:15 +09:00
Riccardo Spagni
99ee3fd17e
Merge pull request #1679
...
4efc926d
2017-02-08 12:53:57 +02:00
Riccardo Spagni
d30b64f457
Merge pull request #1674
...
92978b2c
2017-02-08 12:51:11 +02:00
moneromooo-monero
bceaf4b788
wallet2: fix transactions not considering rct inputs
...
I broke this very recently in 2bf029be17
2017-02-06 20:20:22 +00:00
Lee Clagett
ce7fcbb4ae
Add server auth to monerod, and client auth to wallet-cli and wallet-rpc
2017-02-06 01:15:41 -05:00
Jaquee
7549116ec3
Wallet API: Easylogger wrapper for gui
2017-02-05 20:12:01 +01:00
kenshi84
bab1e9a397
bugfix: infinite recursion in get_account_address_from_str_or_url
2017-02-05 23:20:16 +09:00
NanoAkron
db0a5392a5
Clarify in/out connections for users
2017-02-05 11:15:51 +00:00
moneromooo-monero
92978b2c0f
common: fix link error on at least one platform (no clue which one)
...
Bug and fix reported by tdprime
2017-02-05 10:55:55 +00:00
Jaquee
4efc926d28
Wallet API: Catch error from tools::is_local_address
2017-02-05 11:08:05 +01:00
Jaquee
0cc50bdd11
GUI: Improved refresh performance
2017-02-04 23:25:05 +01:00
Jaquee
805625b541
wallet api: Remove initAsync() and don't start refresh automatically on init
2017-02-04 23:25:03 +01:00
Jaquee
031b060af0
wallet2::init() - disconnect before init if connected
...
Makes it possible for GUI to reinit with new daemon without closing and reopening wallet.
2017-02-04 23:10:20 +01:00
Riccardo Spagni
e56bf442c3
Merge pull request #1669
...
4f5b130d
2017-02-04 17:28:53 +02:00
Riccardo Spagni
5da4650cba
Merge pull request #1671
...
cd34fc65
2017-02-04 17:27:54 +02:00
Riccardo Spagni
c3c281e699
Merge pull request #1666
...
03ff3639
2017-02-04 17:26:19 +02:00
Riccardo Spagni
bcb7b0a9af
Merge pull request #1665
...
34719071a9a9b64b
2017-02-04 17:21:11 +02:00
Riccardo Spagni
eb21389953
Merge pull request #1664
...
b5cb8861
2017-02-04 17:20:02 +02:00
Riccardo Spagni
31cf4e7362
Merge pull request #1640
...
f97526e6
2017-02-04 17:18:38 +02:00
moneromooo-monero
cd34fc655d
Use easylogging++'s stack trace facility where possible
...
This avoids using libunwind, which often causes trouble.
2017-02-04 12:33:03 +00:00
moneromooo-monero
4f5b130de9
wallet_rpc_server: add address book RPC calls
2017-02-04 11:40:49 +00:00
kenshi84
f97526e641
simplewallet: option to always ask password for any crytical operations
2017-02-03 09:38:12 +09:00
Miguel Herranz
03ff363982
Fix missing parentheses
2017-02-02 22:05:31 +01:00
moneromooo-monero
3471907160
simplewallet: cleanup
...
Remove empty static function which was refactored, as well as
leftover exception testing code.
2017-02-02 20:56:53 +00:00
moneromooo-monero
a9a9b64b13
simplewallet: fix build (unqualified type not in current scope)
2017-02-02 20:56:31 +00:00
moneromooo-monero
b5cb8861c7
core: fix integrated addresses breaking with auto zero change
...
Zero change is sent to a random address, which confuses the code
which determines which key to use to encrypt the payment id.
Ignore zero amounts for this purpose, so the payment id gets
encrypted with the real destination's key.
2017-02-02 20:53:12 +00:00
Riccardo Spagni
b01990124e
Merge pull request #1663
...
bbcc3a12
2017-02-02 22:41:58 +02:00
Riccardo Spagni
fcb299b4ae
Merge pull request #1641
...
ca94d0a4
2017-02-02 22:41:28 +02:00
Riccardo Spagni
f4fe39ca92
Merge pull request #1654
...
084aef70
2017-02-02 21:38:15 +02:00
Riccardo Spagni
58c87786ae
Merge pull request #1652
...
fba9332d
2017-02-02 21:36:56 +02:00
Riccardo Spagni
011c5a8a7c
Merge pull request #1647
...
2bf029be
2017-02-02 21:35:31 +02:00
Riccardo Spagni
3aa008e4c6
Merge pull request #1646
...
95f3e193
2017-02-02 21:34:31 +02:00
Riccardo Spagni
10b625079b
Merge pull request #1645
...
9bd9906e
2017-02-02 21:27:45 +02:00
Riccardo Spagni
614400e5af
Merge pull request #1643
...
69d2ad39
2017-02-02 21:26:56 +02:00
Riccardo Spagni
c3eff820be
Merge pull request #1642
...
3ae79a59ea6549e9
2017-02-02 21:25:30 +02:00
Riccardo Spagni
ab2b3480b2
Merge pull request #1639
...
48aa9cf0
2017-02-02 21:22:30 +02:00
Riccardo Spagni
72aa788a0e
Merge pull request #1636
...
cc1462e0
2017-02-02 21:12:13 +02:00
Miguel Herranz
bbcc3a125f
Add missing include
...
Fails to build without it.
2017-02-02 19:54:17 +01:00
Riccardo Spagni
5bb95fc613
Merge pull request #1634
...
99f58437
2017-02-02 19:43:05 +02:00
Riccardo Spagni
a6f61b8419
Merge pull request #1631
...
58e825065f7a87414ecab0d8
2017-02-02 19:41:25 +02:00
Riccardo Spagni
5fb3f97a55
Merge pull request #1629
...
c02e1cb9
2017-02-02 19:32:01 +02:00
Riccardo Spagni
10bf54bfc9
Merge pull request #1628
...
66665003
2017-02-02 18:44:41 +02:00
Riccardo Spagni
ca2e2c2453
Merge pull request #1627
...
55a8e982
2017-02-02 18:24:08 +02:00
Riccardo Spagni
cc03036e3e
Merge pull request #1624
...
a39cd745
2017-02-02 18:20:07 +02:00
Riccardo Spagni
f9e60dcd55
Merge pull request #1617
...
0644eed736dd3e23629e3101
2017-02-02 18:16:39 +02:00
NanoAkron
084aef700b
Added days uptime to the status message
...
Also broke down the time calculations for legibility
2017-01-31 09:49:32 +00:00
luigi1111
1cb5905e71
Merge pull request #1637
...
6b14576
2017-01-30 17:55:52 -06:00
luigi1111
3cef7fbbb6
Merge pull request 1635
...
774a213
2017-01-30 17:09:38 -06:00
Jaquee
774a21394a
Wallet API: Create wallet from keys
2017-01-30 23:28:09 +01:00
NanoAkron
fba9332de8
Changed console output for transaction from L0 to L1
2017-01-30 03:24:51 +00:00
moneromooo-monero
8c8482ac98
wallet_rpc_server: fix short payment id validation in transfer
2017-01-29 16:10:20 +00:00
Ashley Perpetual
48aa9cf035
Add change_password for simplewallet
2017-01-29 03:04:17 +08:00
moneromooo-monero
2bf029be17
wallet2: fix corner case failing to send a second output
...
If a rct transaction can be made with just one input, a second
output will be added. This output will be the smallest amount
output available. However, if this output is a non rct output
with less available fake outs than requested, the transaction
will be rejected. We now check the histogram to only consider
outputs with enough available fake outs in the first place.
2017-01-28 15:07:15 +00:00
moneromooo-monero
9bd9906e8f
Factor is_address_local code into a tools function
2017-01-28 14:57:47 +00:00
Miguel Herranz
95f3e193f0
Update and use blockchain data files defines
2017-01-28 15:55:14 +01:00
Miguel Herranz
ca94d0a43c
Separate data per P2P port
...
poolstate.bin and p2pstate.bin are stored in .bitmonero/ if the default
P2P port is being used.
If another port is used both files are stored in
.bitmonero/PORTNUMBER/.
2017-01-28 14:16:06 +01:00
moneromooo-monero
69d2ad3967
wallet_rpc_server: fix logs going to the wrong file
2017-01-28 11:37:21 +00:00
moneromooo-monero
3ae79a59e4
core: set missing verifivation_failed flag when rejecting a tx
...
This fixes two core rct tests
2017-01-28 09:43:41 +00:00
Ashley Perpetual
cc1462e0b7
Add concurrency check to rpc mining to ensure not too many threads. number of cores times 4 or 257.
2017-01-28 05:59:56 +08:00
luigi1111
4629ead8c5
Merge pull request #1618
2017-01-27 11:33:26 -06:00
Timothy D. Prime
6b145763f7
Fix clang build failure, caused by mixing C and C++
...
Easily fixed by moving a C++ header out of 'extern "C" {...}'.
When building with CC=clang CXX=clang++ make,
[ 21%] Building CXX object src/ringct/CMakeFiles/obj_ringct.dir/rctTypes.cpp.o
In file included from /home/tdprime/bitmonero/src/ringct/rctTypes.cpp:31:
In file included from /home/tdprime/bitmonero/src/ringct/rctTypes.h:43:
In file included from /home/tdprime/bitmonero/src/crypto/generic-ops.h:34:
/usr/bin/../lib/gcc/x86_64-linux-gnu/5.4.0/../../../../include/c++/5.4.0/cstring💯 3: error: conflicting types for 'memchr'
memchr(void* __s, int __c, size_t __n)
^
/usr/include/string.h:92:14: note: previous declaration is here
extern void *memchr (const void *__s, int __c, size_t __n)
^
... and 4 more similar errors
2017-01-26 17:30:00 -08:00
Timothy D. Prime
99f584376e
Fix invalid + of std::string and int
...
These warnings were emitted by clang++, and they are real bugs.
src/rpc/core_rpc_server.cpp:208:58: warning: adding 'uint64_t'
(aka 'unsigned long') to a string does not append to the string
[-Wstring-plus-int]
res.status = "Error retrieving block at height " + height;
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~
The obvious intent is achieved by using std::to_string().
2017-01-26 10:11:37 -08:00
Lee Clagett
c02e1cb943
Updates to epee HTTP client code
...
- http_simple_client now uses std::chrono for timeouts
- http_simple_client accepts timeouts per connect / invoke call
- shortened names of epee http invoke functions
- invoke command functions only take relative path, connection
is not automatically performed
2017-01-25 15:39:32 -05:00
Alexis Enston
58e825060e
Blockfill - Sort tx pool correctly
2017-01-25 12:06:19 +00:00
Alexis Enston
5f7a8741b9
Blockfill - Take TX fees into account properly
2017-01-25 11:59:25 +00:00
Alexis Enston
4ecab0d80c
Consider empty block when filling with TXs
2017-01-25 11:59:15 +00:00
NanoAkron
66665003bd
Clear feedback to user when daemon has stopped successfully
2017-01-25 00:37:23 +00:00
kenshi84
55a8e982c0
moved get_account_address_from_str_or_url from libcommon to libcryptonote_core
2017-01-24 20:31:03 +09:00
moneromooo-monero
a39cd745c9
rpc: fix bc_dyn_stats not setting grace blocks
...
This caused a random value to be used, and the resulting
incorrect fee when it wasn't 0.
2017-01-23 19:28:00 +00:00
Riccardo Spagni
ad91ffe7e5
Merge pull request #1622
...
8141973e
2017-01-23 08:11:24 -05:00
Riccardo Spagni
6f39ba5909
Merge pull request #1621
...
feed6175
2017-01-23 08:11:02 -05:00
Miguel Herranz
8141973e00
Remove unreachable returns
...
CATCH_ENTRY_L0 already returns the second value.
2017-01-23 11:29:34 +01:00
kenshi84
feed6175ea
fixed typo: monero-wallet-cli,log
2017-01-23 11:44:06 +09:00
NanoAkron
98357db400
Update log messages to reflect fact we no longer need to type exit to save database before quitting
2017-01-23 01:21:26 +00:00
Miguel Herranz
0644eed772
Remove boost/foreach.cpp includes
2017-01-22 23:31:34 +01:00
=
e92c4fff1a
Wallet api: testnet getter
2017-01-22 23:02:01 +01:00
Miguel Herranz
36dd3e238f
Replace BOOST_REVERSE_FOREACH with ranged for
2017-01-22 21:47:39 +01:00
Miguel Herranz
629e3101ab
Replace BOOST_FOREACH with C++11 ranged for
2017-01-22 21:38:10 +01:00
moneromooo-monero
8028b5324e
protocol: log received messages in a separate category
...
Makes it easier to log just what's going on on P2P
2017-01-22 16:54:10 +00:00
Riccardo Spagni
9c06a7fd04
Merge pull request #1615
...
f0989893
2017-01-22 11:51:53 -05:00
Riccardo Spagni
17247b23bf
Merge pull request #1612
...
20f71527
2017-01-22 11:49:20 -05:00
Riccardo Spagni
a3de797e57
Merge pull request #1610
...
b70ab128
2017-01-22 11:48:39 -05:00
Riccardo Spagni
add98edfc3
Merge pull request #1609
...
4cdf0a35
2017-01-22 11:47:43 -05:00
Riccardo Spagni
f798a2ab85
Merge pull request #1606
...
f8b97aef
2017-01-22 11:43:11 -05:00
Riccardo Spagni
ee45b7a6db
Merge pull request #1605
...
7c3f79cb6cc7d261
2017-01-22 11:42:15 -05:00
Riccardo Spagni
e12f073f65
Merge pull request #1604
...
a854cec3
2017-01-22 11:41:38 -05:00
moneromooo-monero
f098989396
core: cache tx hashes of failing semantics txes
2017-01-22 16:13:31 +00:00
moneromooo-monero
20f7152769
wallet2: fix sending a rct tx with a single output available
...
This would have tried to send a second output to make the tx
look like the 2/2 ideal, but it would not fail to find one
because picking an output from preferred_inputs priority list
did not remove it from the unused tranfer/dust outputs, so
it would try to send the same output twice.
While there, I also added a check to avoid sending a second
input if it's related to the first. Better 1/2 than linking
inputs, I think.
2017-01-22 15:16:45 +00:00
moneromooo-monero
b70ab128fc
rpc: fix orphan_status when getting blocks
...
It was always set to false, even for orphan blocks
2017-01-22 12:20:55 +00:00
moneromooo-monero
4cdf0a35c9
p2p: always recreate a new peer id on startup
...
This prevents easy fingerprinting when you change IPs, and
will be a must when kovri gets used.
2017-01-22 11:37:55 +00:00
moneromooo-monero
f8b97aef34
p2p: show ban/unban logs by default again
2017-01-21 21:19:21 +00:00
moneromooo-monero
7c3f79cb9f
core: early out in handle_incoming_tx if already in pool or blockchain
2017-01-21 20:30:10 +00:00
moneromooo-monero
6cc7d26140
ringct: reorder a bit to check quicker tests first
2017-01-21 20:29:22 +00:00
moneromooo-monero
a854cec3ba
Make stack trace show up in log file with default settings
2017-01-21 20:28:18 +00:00
Miguel Herranz
1c4d65c011
Rename method to get_random_gray_peer
2017-01-21 13:04:49 +01:00
Miguel Herranz
03a54ee0c9
Fix logging that broke after rebasing
2017-01-21 11:22:04 +01:00
Miguel Herranz
6bdd3a59b5
Use set_peer_just_seen to keep last_seen updated
2017-01-21 10:11:32 +01:00
Miguel Herranz
82dbeedd1b
Add gray peer list housekeeping system
...
A random peer from the gray peer list is selected and a connection is
made to check if the peer is alive.
If the connection and handshake are successful the peer is promoted to
the white peer list, in case of failure the peer is evicted from the
gray peer list.
The connection is closed after the check in either case.
2017-01-21 10:09:38 +01:00
Riccardo Spagni
39aaea8e62
Merge pull request #1599
...
17246d05
2017-01-20 21:00:01 -05:00
Riccardo Spagni
3db3a6ee1a
Merge pull request #1593
...
cbcdf8ad
2017-01-20 20:59:09 -05:00
Riccardo Spagni
4bcd284c76
Merge pull request #1592
...
78d560a9
2017-01-20 20:58:55 -05:00
Riccardo Spagni
d5fbba45e8
Merge pull request #1589
...
87c658f8
2017-01-20 20:58:39 -05:00
Riccardo Spagni
8698dd36f2
Merge pull request #1587
...
843769f8
2017-01-20 20:56:47 -05:00
Riccardo Spagni
d10425025a
Merge pull request #1572
...
0e0e6c5f3f269e98
2017-01-20 20:54:04 -05:00
moneromooo-monero
17246d051d
wallet: print exception message on get_random_outs_error
2017-01-20 18:01:13 +00:00
Miguel Herranz
cbcdf8ad35
Honor depth in get_peerlist_head method
...
The method returned depth + 2 because:
- push_back was executed before the condition.
- > instead of >= causing one more iteration.
2017-01-18 21:41:52 +01:00
kenshi84
78d560a933
simplewallet: use MAKE_CORE_RPC_VERSION(1,4) instead of 0x10004
2017-01-18 16:11:18 +09:00
moneromooo-monero
87c658f83b
wallet2_api: add API to set log categories
2017-01-16 21:14:44 +00:00
Howard Chu
843769f88f
Tweak some msg loglevels
2017-01-16 20:42:59 +00:00
Miguel Herranz
0e0e6c5f39
Reduce to one connection per IP
2017-01-16 18:16:32 +01:00
Riccardo Spagni
71ac698b78
Merge pull request #1585
...
a480bf6b
2017-01-16 08:41:33 -05:00
Riccardo Spagni
deb6728bc3
Merge pull request #1584
...
990e08f0
2017-01-16 08:41:15 -05:00
moneromooo-monero
a480bf6b14
fixups in logging init calls, and add missing net context in a log
2017-01-16 10:45:59 +00:00
Howard Chu
990e08f090
Fix PR#1506, off by one in chain height
2017-01-16 10:00:06 +00:00
moneromooo-monero
693c190881
wallet: add a node RPC cache layer for simple RPC calls
...
Mostly getinfo and get_hard_fork_info, which are called
pretty often. This speeds up transfers as a bonus.
2017-01-16 08:59:15 +00:00
moneromooo-monero
d86ae2bec6
wallet2: reuse fake outs when adjusting fee on transfer
...
This avoids indirectly leaking the real output to the daemon,
and is faster.
This will still happen for more complex cases, especially
when cancelling a tx and "re-rolling" it.
2017-01-16 08:59:08 +00:00
moneromooo-monero
64da0983d5
core: don't try to deserialize an empty extra to remove a field
2017-01-16 08:59:02 +00:00
Riccardo Spagni
ab69d5b367
Merge pull request #1569
...
16b8b66a
2017-01-15 20:32:57 -05:00
kenshi84
16b8b66adc
specify restore height by YYYY-MM-DD format
2017-01-16 10:00:28 +09:00
moneromooo-monero
5833d66f65
Change logging to easylogging++
...
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-16 00:25:46 +00:00
Riccardo Spagni
e459d8604d
Merge pull request #1578
...
ce866d1c
2017-01-15 19:13:45 -05:00
Riccardo Spagni
422a36ca2a
Merge pull request #1581
...
6da9335a
2017-01-15 19:13:28 -05:00
Riccardo Spagni
ec323d8c3f
Merge pull request #1561
...
d561f4ad0aefb2f6629d5b76fb76d4393b6d5f25fcf66925296f8c16
2017-01-15 19:01:08 -05:00
kenshi84
ce866d1cc6
macro to define core RPC version for avoiding future mistake
2017-01-16 07:55:43 +09:00
moneromooo-monero
6da9335a9e
blockchain_import: fix build after tx_pool::add_tx changes
2017-01-15 21:52:56 +00:00
Riccardo Spagni
b2e1568335
Merge pull request #1579
...
f5f4109f
2017-01-15 14:58:09 -05:00
Riccardo Spagni
99ffc49740
Merge pull request #1577
...
feb499aa
2017-01-15 14:57:30 -05:00
Riccardo Spagni
1207d8ad0d
Merge pull request #1576
...
ba3968f6
2017-01-15 14:56:39 -05:00
Riccardo Spagni
9cda94d0aa
Merge pull request #1574
...
d276a165
2017-01-15 14:55:40 -05:00
Riccardo Spagni
f00797a1f2
Merge pull request #1573
...
dea53962
2017-01-15 14:55:12 -05:00
Riccardo Spagni
10c6afd316
Merge pull request #1571
...
81c384e4
2017-01-15 14:50:10 -05:00
Riccardo Spagni
91083a43be
Merge pull request #1568
...
5b5017e2
2017-01-15 14:48:09 -05:00
Riccardo Spagni
31de98793f
Merge pull request #1567
...
c9f13c5e
2017-01-15 14:47:44 -05:00
Riccardo Spagni
51baab2112
Merge pull request #1565
...
50b230d1
2017-01-15 14:47:17 -05:00
Riccardo Spagni
865f5bef34
Merge pull request #1564
...
1d317981
2017-01-15 14:46:52 -05:00
Riccardo Spagni
8bd2c2e551
Merge pull request #1563
...
36ba311c
2017-01-15 14:46:33 -05:00
Riccardo Spagni
935f50471c
Merge pull request #1560
...
46550c0b
2017-01-15 14:44:49 -05:00
Riccardo Spagni
c23bd75df6
Merge pull request #1552
...
4a017674
2017-01-15 14:44:28 -05:00
Riccardo Spagni
65e33b1bc5
Merge pull request #1506
...
3ff54bddeaf8470bc903c554eb1fb6010693cff9
2017-01-15 14:43:12 -05:00
Chris Vickio
0aefb2f60a
remove std::move from return statements (pessimizing-move warning)
2017-01-15 19:23:33 +03:00
Chris Vickio
629d5b7689
change counter from bool to int (deprecated-increment-bool warning)
2017-01-15 19:23:33 +03:00
Howard Chu
3ff54bdd7a
Check for correct thread before ending batch transaction
2017-01-15 15:51:57 +00:00
moneromooo-monero
f5f4109f9a
mnemonics: fix language detection with checksum word
...
If a checksum word is present, language detection would use
just the word prefixes. However, a set of word prefixes may
be found in more than one language, and so the wrong language
may be found first, which could then fail the checksum, since
the check may be done with a different unique prefix length
from the one it was created from.
We now make a checksum test when we we detect a language from
prefixes only, to make sure we have the correct one.
2017-01-15 11:16:25 +00:00
Miguel Herranz
3f269e988c
Limit incoming connections from the same IP
2017-01-15 12:11:27 +01:00
Howard Chu
eaf8470b29
Must wait for previous batch to finish before starting new one
2017-01-14 22:43:06 +00:00
Howard Chu
c903c5541e
Don't cache block height, always get from DB
2017-01-14 22:43:06 +00:00
Howard Chu
eb1fb6011a
Tweak default db-sync-mode to fast:async:1
...
fsync the DB asynchronously, to allow block download/verification
to proceed while syncing. Sync after every batch. Note that
"fastest" still defaults to fastest:async:1000.
2017-01-14 22:43:06 +00:00
Howard Chu
0693cff925
Use batch transactions when syncing
...
Faster throughput while avoiding corruption. I.e., makes
running with --db-sync-mode safe more tolerable.
2017-01-14 22:43:06 +00:00
moneromooo-monero
feb499aaae
core: check block version for alt chains too
...
This is incompatible with block version voting
2017-01-14 22:41:14 +00:00
moneromooo-monero
d276a16526
wallet2: use at least two rct inputs if possible
...
If we'd make a rct tx with just one input, we try to add
a second one to match the 2/2 ideal. This means more txes
use that template (and are thus using a larger anonymity
set), and it coalesces outputs "for free". We use the
smallest amount outputs in priority for this, so we can
"clean" the wallet at the same time.
2017-01-14 21:43:01 +00:00
moneromooo-monero
ba3968f6ce
rct: split rct checks between semantics and other
...
Semantics can be checked early
2017-01-14 21:17:32 +00:00
Jaquee
dea53962a3
fix timeout in check_connection
2017-01-14 14:45:30 +01:00
moneromooo-monero
81c384e408
fix do_not_relay not preventing relaying on a timer
...
Also print its value when printing pool
2017-01-14 13:07:05 +00:00
Chris Vickio
fb76d43980
add extra braces around subobjects (missing-braces warning)
2017-01-14 15:06:07 +03:00
Chris Vickio
3b6d5f255d
make struct/class declarations consistent (mismatched-tags warning)
2017-01-14 15:06:07 +03:00
Chris Vickio
fcf66925c1
remove unused fields from network_throttle (unused-private-field warning)
2017-01-14 15:06:07 +03:00
moneromooo-monero
5b5017e267
rpc: add a command to get info about the current blockchain
...
About the tip of the main chain, and the last N blocks
2017-01-13 23:21:38 +00:00
moneromooo-monero
c9f13c5e54
wallet2: fix tx reroll not updating fee is going up a kB step
2017-01-13 22:28:19 +00:00
moneromooo-monero
176b70a0d4
account: fix build error involving std::max and different types
2017-01-13 22:12:27 +00:00
Jaquee
1d3179816b
Wallet API: add key image import/export functions
2017-01-13 23:02:20 +01:00
Jaquee
4a0176740d
Wallet API: support integrated addresses in address book.
2017-01-13 22:41:17 +01:00
moneromooo-monero
50b230d12c
core: ensure block size limit is set from the start
...
It can now be queried by RPC, so it needs to be set before
it is otherwise needed for consensus, even if no blocks had
to be added (ie, exit and restart quickly).
2017-01-13 21:06:14 +00:00
Jaquee
46550c0b4f
Wallet API: add rescanSpent()
2017-01-13 22:05:39 +01:00
Riccardo Spagni
2806842200
Merge pull request #1562
...
a081b39c
2017-01-13 14:38:29 -05:00
Riccardo Spagni
2a2f02e375
Merge pull request #1559
...
db56a03f
2017-01-13 14:37:12 -05:00
Riccardo Spagni
cbb39b499b
Merge pull request #1558
...
7961878e
2017-01-13 14:36:42 -05:00
Riccardo Spagni
e75fd059dd
Merge pull request #1555
...
758c0eb7
2017-01-13 14:36:24 -05:00
Riccardo Spagni
433adee594
Merge pull request #1545
...
5ae00f0f
2017-01-13 14:35:34 -05:00
Riccardo Spagni
0b6031adbf
Merge pull request #1543
...
19be7225
2017-01-13 14:35:21 -05:00
Riccardo Spagni
faa33fc326
Merge pull request #1541
...
0d3918e1dbb838f4afb85a02
2017-01-13 14:34:55 -05:00
Riccardo Spagni
e51afeb90f
Merge pull request #1540
...
79b4e1f9
2017-01-13 14:34:26 -05:00
Riccardo Spagni
006bb0e957
Merge pull request #1538
...
aff281781229c685e3090558046ab33d
2017-01-13 14:33:59 -05:00
Riccardo Spagni
36b84ded95
Merge pull request #1526
...
5eed5b05
2017-01-13 14:32:26 -05:00
Riccardo Spagni
aeeb24991a
Merge pull request #1523
...
d81cb087
2017-01-13 14:32:08 -05:00
Riccardo Spagni
71c7577370
Merge pull request #1513
...
a813ab50
2017-01-13 13:24:45 -05:00
Riccardo Spagni
5738e07fba
Merge pull request #1492
...
f1dde1a4
2017-01-13 13:22:13 -05:00
Miguel Herranz
36ba311cf4
Prioritize older transactions in the mempool
...
The transactions are first prioritized by fee and in case the fees are
equal by receive_time.
2017-01-13 16:08:37 +01:00
Jaquee
a081b39c01
Move key image export/import functions to wallet2
2017-01-13 12:49:10 +01:00
Jaquee
db56a03ff2
Wallet2 + API: Callbacks for unconfirmed transfers
2017-01-12 18:25:34 +01:00
Chris Vickio
7961878e81
initialize timestamp to 0 and check for mktime() error
2017-01-12 10:13:58 +03:00
Miguel Herranz
19be7225cc
Add start_time to get_info methods and show uptime
2017-01-12 00:15:21 +01:00
Lee Clagett
d81cb08704
Added (not yet enabled) HTTP client authentication
2017-01-11 03:21:17 -05:00
Jaquee
0d3918e15b
Wallet api: Update trustedDaemon when daemon is changed
2017-01-10 22:49:30 +01:00
Jaquee
dbb838f4d0
GUI cold signing
...
fix conflict
2017-01-10 22:49:17 +01:00
Jaquee
afb85a028f
Wallet API: functions for supporting/creating view only wallets
2017-01-10 22:49:11 +01:00
Jaquee
5eed5b056b
Wallet API: functions for supporting/creating view only wallets
2017-01-10 22:34:46 +01:00
luigi1111
758c0eb79f
fix time stats mixin
...
also add blobsize
2017-01-10 10:15:15 -06:00
Miguel Herranz
aff28178e6
Remove db-auto-remove-logs
2017-01-10 11:49:45 +01:00
Miguel Herranz
1229c68587
Remove berkeley from db_type initialization
2017-01-10 11:46:12 +01:00
Miguel Herranz
e309055819
Show available types for db-type command
2017-01-10 11:44:01 +01:00
Miguel Herranz
046ab33d1b
Remove berkeley from blockchain_db_types
2017-01-10 11:17:48 +01:00
moneromooo-monero
a813ab50fe
wallet2_api: add solo mining API
2017-01-09 10:12:55 +00:00
kenshi84
f1dde1a429
wallet cli: print originating block heights of mixin keys when making transfer
2017-01-09 15:10:34 +09:00
luigi1111
5ae00f0ff5
add msg for donate
...
#1498
2017-01-08 21:05:00 -06:00
luigi1111
db44a909ba
Fix monero-wallet-cli compile
...
Not 100$ sure this is the right fix, nor whether address book entries from URL should be stored as addresses or URLs (or both with a check for change on payment).
2017-01-08 20:26:57 -06:00
Riccardo Spagni
c6ec939626
Merge pull request #1542
...
60fe1b61
2017-01-08 16:47:42 -08:00
Riccardo Spagni
59021496d8
Merge pull request #1537
...
c213508219c4041d
2017-01-08 16:44:29 -08:00
Riccardo Spagni
15dcc5afd3
Merge pull request #1534
...
1607cb7e9731b4e59188b346
2017-01-08 16:43:54 -08:00
Riccardo Spagni
6cbfe0f849
Merge pull request #1521
...
21c5af5a
2017-01-08 16:42:08 -08:00
Riccardo Spagni
ba9744d400
Merge pull request #1515
...
ada7c7daf390a0e2
2017-01-08 16:41:44 -08:00
Riccardo Spagni
2a996f492f
Merge pull request #1510
...
80abc3bc
2017-01-08 16:40:02 -08:00
Riccardo Spagni
da05900524
Merge pull request #1509
...
29333c41
2017-01-08 16:39:23 -08:00
Riccardo Spagni
13c5da2aa3
Merge pull request #1508
...
4585ada4
2017-01-08 16:39:07 -08:00
Riccardo Spagni
0ce4618bea
Merge pull request #1504
...
5f4ac6b9
2017-01-08 16:38:19 -08:00
Riccardo Spagni
c284b0fff7
Merge pull request #1503
...
542571f5
2017-01-08 16:38:01 -08:00
Riccardo Spagni
fdb1cda965
Merge pull request #1502
...
591d8368
2017-01-08 16:37:31 -08:00
Riccardo Spagni
06de09daf4
Merge pull request #1501
...
cebae0c5
2017-01-08 16:37:11 -08:00
Riccardo Spagni
1736b7ef6b
Merge pull request #1500
...
c0a0fcaf
2017-01-08 16:36:46 -08:00
Riccardo Spagni
d655e88b44
Merge pull request #1499
...
37ed96e694b6feef
2017-01-08 16:35:49 -08:00
Riccardo Spagni
03497f0268
Merge pull request #1497
...
50511677
2017-01-08 16:35:14 -08:00
Riccardo Spagni
209a633a3c
Merge pull request #1496
...
adee1644
2017-01-08 16:34:51 -08:00
Riccardo Spagni
23cf963332
Merge pull request #1493
...
0478ac68
2017-01-08 16:33:41 -08:00
Riccardo Spagni
fc0a2b837b
Merge pull request #1490
...
474c249c
2017-01-08 16:32:21 -08:00
Riccardo Spagni
f4b3989c61
Merge pull request #1482
...
38f00d07
2017-01-08 16:31:55 -08:00
Riccardo Spagni
ff1bb6bc68
Merge pull request #1460
...
99580adf
2017-01-08 16:31:42 -08:00
MoroccanMalinois
60fe1b61e0
Add parse_uri to wallet2_api
2017-01-08 22:53:24 +00:00
Jaquee
79b4e1f997
Cold signing: make sure short payment id isnt encrypted twice
2017-01-08 21:04:53 +01:00
moneromooo-monero
c21350823f
simplewallet: add a show_transfer <txid> command
2017-01-08 13:57:24 +00:00
moneromooo-monero
19c4041df5
wallet_rpc_server: new RPC call to get a transfer by txid
2017-01-08 13:16:22 +00:00
moneromooo-monero
0478ac6848
blockchain: allow marking "tx not found" without an exception
...
This is a normal occurence in many cases, and there is no need
to spam the log with those when it is.
2017-01-07 20:52:17 +00:00
moneromooo-monero
1607cb7e0c
tx_pool: better block template filling algorithm
...
Continue filling until we reach the block size limit, or the
resulting coinbase decreases.
Also remove old sanity check on block size, which is now not
wanted anymore.
2017-01-07 12:36:22 +00:00
moneromooo-monero
9731b4e54f
rpc: add block size to GET_BLOCK_HEADER RPC
...
and print it in print_bc
2017-01-06 19:38:27 +00:00
moneromooo-monero
9188b3468c
rpc: add current block size to the getinfo call
2017-01-06 19:30:10 +00:00
MoroccanMalinois
80abc3bc4a
Build wallet with Android NDK
2017-01-05 01:11:05 +00:00
kenshi84
ada7c7da8f
portable serializer: tests added
2017-01-03 09:14:48 +09:00
kenshi84
f390a0e2dc
portable serializer: make signerd/unsigned tx portable, ignore archive version checking
2017-01-02 20:04:58 +09:00
moneromooo-monero
21c5af5a8a
wallet2_api: add an address book payment id lookup API
2017-01-01 16:06:34 +00:00
Jaquee
29333c417e
wallet api: prevent setting refresh height too high
2016-12-27 19:38:05 +01:00
Jaquee
4585ada453
Wallet2: faster exit while refreshing
2016-12-27 19:12:18 +01:00
moneromooo-monero
cebae0c510
wallet2: check the node returned the real output when requested
2016-12-27 09:38:10 +00:00
kenshi84
5f4ac6b909
wallet2 bugfix: store watch_only flag properly with rewrite()
2016-12-26 18:33:24 +09:00
kenshi84
adee16440a
wallet cli: print unspent outputs with histogram
2016-12-26 16:03:16 +09:00
kenshi84
542571f5cb
simplewallet: remove unnecessary local_args.erase(...) in set_variable()
2016-12-26 08:50:37 +09:00
moneromooo-monero
591d83686e
core: invalidate difficulty cache when resetting blockchain
2016-12-25 20:38:11 +00:00
moneromooo-monero
c0a0fcaff0
wallet2_api: some new APIs to access daemon state
2016-12-25 12:31:50 +00:00
moneromooo-monero
37ed96e611
tx_pool: fix uninitialized "last failed" fields
2016-12-24 19:42:35 +00:00
moneromooo-monero
94b6feef24
rpc: fix mixup in tx_info serialization
2016-12-24 18:08:48 +00:00
moneromooo-monero
505116771e
wallet2: fix large reorgs failing
...
If a reorg was large enough that a full 1000 block chunk
from the daemon was all known blocks, refresh would stop,
and no reorg would happen.
2016-12-24 16:04:37 +00:00
fireice-uk
474c249c90
cleaner log calc algorithm
2016-12-22 20:29:41 +00:00
luigi1111
374762654e
add tx hash to time stats
...
Also miner tx hash to log level 1 (have you ever tried to find a testnet miner tx hash?)
2016-12-21 19:20:49 -06:00
kenshi84
99580adf66
make openalias also available for solo miner; introduce namespace tools::dns_utils; support integrated address with dns lookup
2016-12-21 23:12:15 +09:00
moneromooo-monero
12abe86ac0
core: fix recalculation of emission/fees
...
It was counting things many, many times
2016-12-21 11:19:04 +00:00
kenshi84
38f00d07f7
wallet cli: viewing and editing address book
2016-12-21 19:27:18 +09:00
Riccardo Spagni
4fe5c351cd
Merge pull request #1479
...
c31e42e2
2016-12-20 23:01:39 +02:00
moneromooo-monero
c31e42e2bb
simplewallet: bump output file format version
...
The serialization format changed, and while there is code
to load the older serialization format, an older monerod
will not be able to load a file saved by a new monerod,
even though both share the same version. This is not good,
and we prefer a version bump.
2016-12-20 19:02:51 +00:00
moneromooo-monero
1976eddd89
common: add missing #include <system_error> for std::error_code
2016-12-20 18:53:58 +00:00
Riccardo Spagni
9777de1890
Merge pull request #1474
...
fc40b3e7
2016-12-20 17:47:58 +02:00
Riccardo Spagni
e170cbe013
Merge pull request #1473
...
e3639f5c
2016-12-20 17:47:16 +02:00
Riccardo Spagni
6847999fb8
Merge pull request #1472
...
2bddb8eb
2016-12-20 17:46:58 +02:00
Riccardo Spagni
dca146f823
Merge pull request #1469
...
9e4b3724
2016-12-20 17:45:47 +02:00
Riccardo Spagni
233ba51ad9
Merge pull request #1468
...
9a2cd722
2016-12-20 17:45:13 +02:00
Riccardo Spagni
f5176cb6e8
Merge pull request #1467
...
55fa0479
2016-12-20 17:44:47 +02:00
Riccardo Spagni
1551ce98f2
Merge pull request #1466
...
c367d7dfb9a28677d36669fd
2016-12-20 17:43:38 +02:00
Riccardo Spagni
b9b9028e50
Merge pull request #1462
...
07b9138c2ac80075d1d6e27a66e6af89
2016-12-20 17:40:11 +02:00
kenshi84
07b9138cad
support importing unportable outputs
2016-12-20 13:26:39 +09:00
kenshi84
2ac8007544
also use portable serializer for boost_serialization_helper.h and net_node.inl, completely adandon boost/archive/binary_oarchive.hpp
2016-12-20 13:04:19 +09:00
kenshi84
d1d6e27ab6
moved boost cpp into hpp since they're supposed to be header only
2016-12-20 12:27:23 +09:00
Lee Clagett
2bddb8ebee
Refactored password prompting for wallets
2016-12-19 20:00:43 -05:00
Jaquee
fc40b3e732
Lower connection timeout in check_connection()
2016-12-19 21:19:02 +01:00
Lee Clagett
e3639f5cc3
Removed unused functions
2016-12-19 14:47:26 -05:00
moneromooo-monero
9e4b3724c7
simplewallet: add pending/pool/failed in the show_transfers help
...
reported by nioc
2016-12-17 19:51:09 +00:00
moneromooo-monero
9a2cd72257
wallet2_api: add an API to the OpenAlias resolver
2016-12-17 13:05:17 +00:00
moneromooo-monero
55fa0479a0
rpc: new function and RPC to get alternative chain info
2016-12-17 11:28:49 +00:00
Lee Clagett
427054c3d5
Enabled HTTP auth support for monero-wallet-rpc
2016-12-16 23:59:46 -05:00
anonimal
b9a28677e2
simplewallet: add return type for donate function
...
Resolves -Wreturn-type
References #1447 #1451
2016-12-17 03:37:20 +00:00
anonimal
d36669fd75
simplewallet: hardcode Monero's donation address
...
Closes #1447
References #1451
2016-12-17 02:52:09 +00:00
kenshi84
66e6af89ce
added experimental boost::archive::portable_binary_{i|o}archive
2016-12-16 23:46:24 +09:00
Riccardo Spagni
29735c8f8f
Merge pull request #1459
...
b00da61e
2016-12-15 14:36:35 +02:00
Riccardo Spagni
73e50749e2
Merge pull request #1455
...
4bb0bff2
2016-12-15 14:35:47 +02:00
Riccardo Spagni
c6f26ecae2
Merge pull request #1449
...
374b58d1
2016-12-15 14:29:40 +02:00
Riccardo Spagni
00898fe750
Merge pull request #1452
...
944b6079
2016-12-15 14:28:15 +02:00
Riccardo Spagni
5f5cfdfa77
Merge pull request #1451
...
2506d51d
2016-12-15 14:27:02 +02:00
Riccardo Spagni
aa47ea41a7
Merge pull request #1444
...
bdc3d749
2016-12-15 14:25:49 +02:00
Jaquee
944b6079d9
Wallet API: Do not refresh while daemon is syncing
...
+ fixed fast refresh when creating wallet offline
+ improved close wallet logic (make sure refresh thread is stopped)
2016-12-15 12:31:09 +01:00
Antonio Huete Jimenez
b00da61eab
Preliminary support for DragonFly BSD
...
- It builds but no further testing has been done.
2016-12-15 02:27:53 -08:00
Kenshi Takayama
2506d51d60
wallet cli: donate command
2016-12-15 19:01:36 +09:00
anonimal
4bb0bff233
AddressBook: use unsigned type for row ID's
...
Fixes build warnings and may also prevent future headaches.
2016-12-14 21:37:49 +00:00
moneroexamples
374b58d131
fix MGs json
2016-12-14 09:27:37 +08:00
Riccardo Spagni
b97a2f72db
Merge pull request #1445
...
95b9e85e
2016-12-13 19:14:00 +02:00
Riccardo Spagni
183d3657f3
Merge pull request #1446
...
b2adfa8c
2016-12-13 19:13:09 +02:00
Randi Joseph
b2adfa8c51
Bitmonero namespace renamed Monero. Bitmonero namespace alias added so that third party uses of the wallet api can transition.
2016-12-13 10:21:38 -05:00
Riccardo Spagni
95b9e85e2d
rename cn_deserialize
2016-12-13 16:39:43 +02:00
Riccardo Spagni
b1bdb4e529
Merge pull request #1437
...
655eafd1117194a339a9db9e
2016-12-13 16:36:43 +02:00
Riccardo Spagni
2f2c6460ae
Merge pull request #1442
...
dd144b14
2016-12-13 10:24:25 +02:00
Riccardo Spagni
c03da2b2dd
Merge pull request #1441
...
0fb5dc87
2016-12-13 10:23:49 +02:00
Riccardo Spagni
c2a9229310
Merge pull request #1439
...
4299bdf6
2016-12-13 10:23:22 +02:00
Lee Clagett
bdc3d7496f
Adding HTTP Digest Auth (but not yet enabled)
2016-12-13 00:19:54 -05:00
moneromooo-monero
dd144b14bc
blockchain: fix reorganizations past a hard fork boundary
...
After popping blocks from the old chain, the hard fork object's
notion of the current version was not in line with the new height,
causing the first blocks from the new chain to be rejected due
to a false expection of a newer version.
2016-12-13 02:13:23 +00:00
luigi1111
0fb5dc870d
monero-wallet-cli wording changes 'n' stuff
...
Possibly other pedantry. Pedants are people too.
2016-12-12 19:53:28 -06:00
NanoAkron
4299bdf614
Improve language of 'node ahead by' message
2016-12-12 23:24:40 +00:00
luigi1111
9d906159c3
Tx verification failing is not an error
...
And rangeProofs are on outputs...
2016-12-12 17:01:20 -06:00
Riccardo Spagni
655eafd160
bump version
2016-12-13 00:29:29 +02:00
Riccardo Spagni
117194a397
update checkpoints
2016-12-13 00:26:25 +02:00
Riccardo Spagni
39a9db9eb1
update checkpoints
2016-12-13 00:24:48 +02:00
Jaquee
3b4539ee7e
addressbook updates
2016-12-12 21:50:50 +01:00
Riccardo Spagni
5b7f1fc8e4
Merge pull request #1424
...
aeb13289
2016-12-12 22:40:41 +02:00
Riccardo Spagni
aa7a926681
Merge pull request #1434
...
5df92877
2016-12-12 22:39:38 +02:00
Riccardo Spagni
84d3107600
Merge pull request #1431
...
81c6bb9a
2016-12-12 22:38:27 +02:00
Riccardo Spagni
67844f826e
Merge pull request #1425
...
c5c45ca6
2016-12-12 22:38:05 +02:00
Jaquee
5df92877c7
GUI address book
2016-12-12 00:43:02 +01:00
moneromooo-monero
81c6bb9a40
thread_group: fix build on older GCC
...
vtnerd (original author) confirmed this is the Right Way.
2016-12-11 13:59:42 +00:00
moneromooo-monero
c5c45ca660
wallet: bring forward use of the dynamic fee
...
It was 14 days after v4, it is now one day after it.
luigi1111's suggestion
2016-12-10 15:39:26 +00:00
Gingeropolous
aeb13289bb
Update cryptonote_protocol_handler.inl
...
Per discussion of #1359 , the wording has changed to indicate that no assessment of the blocks validity is made.
2016-12-10 10:22:16 -05:00
moneromooo-monero
19585d4914
mnemonics: fix misc STL containers leak
...
found by coverity
2016-12-10 12:51:36 +00:00
moneromooo-monero
f6fcf0ef26
oaes_lib: fix a leak on OOM error path
...
found by coverity
2016-12-10 12:51:20 +00:00
Riccardo Spagni
2d0fbaf35b
Merge pull request #1422
...
9b00d80f
2016-12-10 14:49:34 +02:00
Riccardo Spagni
930aceb242
Merge pull request #1419
...
f4a3ce15
2016-12-10 14:48:56 +02:00
Riccardo Spagni
0f99423080
Merge pull request #1418
...
dfbb85b6
2016-12-10 14:48:39 +02:00
moneromooo-monero
9b00d80f85
wallet2: pass by const ref where possible
...
Reported by kenshi84
2016-12-10 11:43:44 +00:00
moneromooo-monero
f4a3ce15c1
Fix sending outputs from a tx with more than one pubkey
...
A bug in cold signing caused a spurious pubkey to be included
in transactions, so we need to ensure we use the correct one
when sending outputs from one of those.
2016-12-09 18:21:21 +00:00
moneromooo-monero
dfbb85b6fe
blockchain: fix setting non trovial alternate chain as invalid
...
The wrong iterator was being used.
Also preincrement iterators to avoid possibly invalidating them,
I'm not sure this is necessary, but let's be safe.
2016-12-08 22:26:27 +00:00
Riccardo Spagni
12b59460c2
Merge pull request #1417
...
0b91d825
2016-12-08 23:45:04 +02:00
Riccardo Spagni
8e1a8c6adc
Merge pull request #1415
...
6c44f5c6
2016-12-08 23:44:40 +02:00
Riccardo Spagni
e6b05ed95a
Merge pull request #1414
...
3b0052752f1732a7
2016-12-08 23:44:09 +02:00
Riccardo Spagni
22e16e88e3
Merge pull request #1413
...
648ea6be46a0dcc176958fc7
2016-12-08 23:43:41 +02:00
Riccardo Spagni
f9503d2789
Merge pull request #1405
...
d1a75754
2016-12-08 23:43:19 +02:00
moneromooo-monero
0b91d82574
simplewallet: restore automatically setting trusted local daemon
2016-12-08 20:01:24 +00:00
moneromooo-monero
3b00527500
ringct: add sc_check calls in MLSAG_Ver for ss and cc
...
luigi1111's recommendation
2016-12-07 22:41:21 +00:00
moneromooo-monero
2f1732a7e5
ringct: guard against bad data exceptions in worker threads
...
If purported pubkeys aren't actually valid pubkeys, exceptions
will fly. These will terminate if thrown in a worker thread.
Guard against this.
2016-12-07 22:09:43 +00:00
moneromooo-monero
6c44f5c6eb
wallet: send 0 change to a random address where necessary with rct
...
If a rct transaction would cause no change to be generated, a zero
change output is added, and sent to a randomly generated address.
This ensures that no transaction will be sent with just one output,
which could cause the receiver to be able to determine which of the
inputs in the sent rings is the real one.
This is very rare, since it requires the sum of outputs to be equal
to the sum of outputs plus the fee, which is now a function of the
last few blocks.
2016-12-07 21:05:50 +00:00
luigi1111
648ea6bef1
blockchain: bring the v4 fork height one block forward
...
This will ensure the early 0.10 daemons will barf at the fork
height, and not a bit later, which could be confusing.
2016-12-06 21:59:08 +00:00
Lee Clagett
18462aa065
Added confirmation before binding wallet-rpc to external IP
2016-12-05 21:45:11 -05:00
Jaquee
d1a75754df
Remove infinite loop in refresh code
...
This reverts commit fd181b03bb
2016-12-05 13:02:45 +01:00
luigi1111
46a0dcc1d2
ringct: luigi1111's changes to fix and speedup Borromean sigs
2016-12-04 21:54:16 +00:00
Shen Noether
76958fc75a
ringct: switch to Borromean signatures
2016-12-04 21:54:11 +00:00
Riccardo Spagni
b500a64524
Merge pull request #1399
...
73ac3b8e
2016-12-04 22:28:48 +02:00
Riccardo Spagni
f2ea2afb77
Merge pull request #1398
...
f4772bae
2016-12-04 22:28:22 +02:00
Riccardo Spagni
8086379680
Merge pull request #1397
...
3f7d6fb5
2016-12-04 22:27:41 +02:00
Riccardo Spagni
4a0be41dfe
Merge pull request #1396
...
7c0dd5e4
2016-12-04 22:26:12 +02:00
Riccardo Spagni
d59dc59744
Merge pull request #1395
...
59443bf9
2016-12-04 22:25:24 +02:00
Riccardo Spagni
daf5dbebb0
Merge pull request #1393
...
0e18f465c96f9b02bef51e673465c4eb
2016-12-04 22:23:34 +02:00
Riccardo Spagni
416f7fbd5f
Merge pull request #1392
...
204b1bff
2016-12-04 22:23:03 +02:00
Riccardo Spagni
98150be7d8
Merge pull request #1389
...
4adde042
2016-12-04 22:22:07 +02:00
