# Language zh-cn translations for PACKAGE package
# Copyright (C) 2022 Free Software Foundation, Inc.
# This file is distributed under the same license as the PACKAGE package.
# Automatically generated, 2022.
#
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"POT-Creation-Date: 2022-10-24 04:09+0100\n"
"PO-Revision-Date: 2022-10-24 04:09+0100\n"
"Last-Translator: Automatically generated\n"
"Language-Team: none\n"
"Language: zh-cn\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:2
msgid ""
"{% include disclaimer.html translated=\"no\" translationOutdated=\"no\" %}"
msgstr ""

#. type: Title ###
#: ../_i18n/en/resources/user-guides/change-restore-height.md:3
#, no-wrap
msgid "Table of contents"
msgstr ""

#. type: Bullet: '- '
#: ../_i18n/en/resources/user-guides/change-restore-height.md:10
msgid ""
"[What is the wallet restore height?](#what-is-the-wallet-restore-height)"
msgstr ""

#. type: Bullet: '- '
#: ../_i18n/en/resources/user-guides/change-restore-height.md:10
msgid ""
"[Why Monero wallets have a restore height?](#why-monero-wallets-have-a-"
"restore-height)"
msgstr ""

#. type: Bullet: '- '
#: ../_i18n/en/resources/user-guides/change-restore-height.md:10
msgid ""
"[What happens if I set a wrong restore height?](#what-happens-if-i-set-a-"
"wrong-restore-height)"
msgstr ""

#. type: Bullet: '- '
#: ../_i18n/en/resources/user-guides/change-restore-height.md:10
msgid ""
"[How to change the wallet restore height on Monero GUI](#how-to-change-the-"
"wallet-restore-height-on-monero-gui)"
msgstr ""

#. type: Bullet: '- '
#: ../_i18n/en/resources/user-guides/change-restore-height.md:10
msgid ""
"[My wallet is showing a wrong balance after changing the restore height](#my-"
"wallet-balance-is-wrong-after-changing-the-restore-height)"
msgstr ""

#. type: Title ###
#: ../_i18n/en/resources/user-guides/change-restore-height.md:11
#, no-wrap
msgid "What is the wallet restore height?"
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:14
msgid ""
"The wallet restore height is a setting that tells the wallet software from "
"which block it should start scanning the @blockchain when looking for "
"@transactions, a process that is known as wallet synchronization. Ideally it "
"should be the number of the block which included the first incoming "
"transaction to your wallet."
msgstr ""

#. type: Title ###
#: ../_i18n/en/resources/user-guides/change-restore-height.md:15
#, no-wrap
msgid "Why Monero wallets have a restore height?"
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:18
msgid ""
"Unlike most @cryptocurrencies, all transactions included in the Monero "
"blockchain are encrypted. Therefore, your wallet software has to use its "
"private @view-key to locate the transactions destined for you on the "
"blockchain. The process of scanning the Monero blockchain looking for "
"transactions is known as wallet synchronization and it demands a lot of "
"computing resources."
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:20
msgid ""
"Setting a restore height makes your wallet synchronization faster, because "
"the wallet software will not start the blockchain scanning at the beginning "
"of Monero (April 2014), but at the time of the restore height."
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:22
msgid ""
"![restore-height](/img/resources/user-guides/en/change_restore_height/"
"restore-height.png)"
msgstr ""

#. type: Title ###
#: ../_i18n/en/resources/user-guides/change-restore-height.md:23
#, no-wrap
msgid "What happens if I set a wrong restore height?"
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:26
msgid ""
"If you set a restore height higher than the block height of your first "
"incoming transaction, your wallet software will not detect all transactions "
"of your wallet. In consequence, your balance will be wrong and your wallet "
"software will not work properly."
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:28
msgid ""
"If you set a restore height lower than the block height of your first "
"incoming transaction, your wallet software will scan unnecessary blocks. In "
"consequence, your initial wallet synchronization will take longer than "
"necessary, but your wallet software will still work."
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:30
msgid ""
"Therefore, if you're unsure about the block height of your first incoming "
"transaction, it's always better to set a lower restore height instead of a "
"higher one."
msgstr ""

#. type: Title ###
#: ../_i18n/en/resources/user-guides/change-restore-height.md:31
#, no-wrap
msgid "How to change the wallet restore height on Monero GUI"
msgstr ""

#. type: Bullet: '1) '
#: ../_i18n/en/resources/user-guides/change-restore-height.md:34
msgid ""
"Go to `Settings` > `Info` page. On `Wallet restore height:`, click on "
"`(Change)`."
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:36
#, no-wrap
msgid "<img src=\"/img/resources/user-guides/en/change_restore_height/change_wallet_restore_height.png\" style=\"width: 593px;\"/>\n"
msgstr ""

#. type: Bullet: '2) '
#: ../_i18n/en/resources/user-guides/change-restore-height.md:38
msgid ""
"Next, enter your new restore height, which should be the number of the block "
"in which your first incoming transaction was included. If you have the "
"transaction ID (txid) of the first incoming transaction, you can enter it in "
"a [block explorer]({{site.baseurl}}/resources/tools/) to check in which "
"block it was included."
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:40
#, no-wrap
msgid "<img src=\"/img/resources/user-guides/en/change_restore_height/set_new_restore_height-height.png\" style=\"width: 417px;\"/>\n"
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:42
msgid ""
"If you don't know the block number of the first incoming transaction to your "
"wallet, you can enter its date or an estimated date (YYYY-MM-DD format)."
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:44
#, no-wrap
msgid "<img src=\"/img/resources/user-guides/en/change_restore_height/set_new_restore_height-date.png\" style=\"width: 417px;\"/>\n"
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:46
#: ../_i18n/en/resources/user-guides/change-restore-height.md:52
msgid "Click on `Ok` button to continue."
msgstr ""

#. type: Bullet: '3) '
#: ../_i18n/en/resources/user-guides/change-restore-height.md:48
msgid ""
"Next, a dialog window will appear informing that your current wallet cache "
"will clear all information stored about recipient addresses, transaction "
"keys, and transaction descriptions."
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:50
msgid ""
"But don't worry, you will not lose any important information. Your current "
"wallet cache will be stored as a backup file in the same folder of your "
"wallet and can be restored later."
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:54
#, no-wrap
msgid "<img src=\"/img/resources/user-guides/en/change_restore_height/rescan_wallet_cache.png\" style=\"width: 600px;\"/>\n"
msgstr ""

#. type: Bullet: '4) '
#: ../_i18n/en/resources/user-guides/change-restore-height.md:56
msgid ""
"Your wallet will now start a new wallet synchronization, rescanning the "
"blockchain starting from the new restore height*."
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:58
msgid ""
"Your wallet balance should be correct after the wallet synchronization is "
"completed."
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:60
#, no-wrap
msgid "*If your wallet is connected to a local node that is not yet synchronized, you will have to wait for the node synchronization to finish.\n"
msgstr ""

#. type: Title ###
#: ../_i18n/en/resources/user-guides/change-restore-height.md:61
#, no-wrap
msgid "My wallet balance is wrong after changing the restore height"
msgstr ""

#. type: Plain text
#: ../_i18n/en/resources/user-guides/change-restore-height.md:63
msgid ""
"This problem usually occurs when you set a restore height that is higher "
"than the block height of the first incoming transaction to your wallet. To "
"solve this issue, change the wallet restore height again using a lower "
"restore height."
msgstr ""