| `--log-file` | Full path to the log file. Example (mind file permissions): <br/>`./monerod --log-file=/var/log/monero/mainnet/monerod.log`
| `--log-level` | `0-4` with `0` being minimal logging and `4` being full tracing. Defaults to `0`. These are general presets and do not directly map to severity levels. For example, even with minimal `0`, you may see some most important `INFO` entries. Temporarily changing to `1` allows for much better understanding of how the full node operates. Example: <br/>`./monerod --log-level=1`
| `--max-log-file-size` | Soft limit in bytes for the log file (=104850000 by default, which is just under 100MB). Once log file grows past that limit, `monerod` creates next log file with a `-YYYY-MM-DD-HH-MM-SS` UTC timestamp postfix. In production deployments, you would probably prefer to use established solutions like logrotate instead.
| `--max-log-files` | Limit on the number of log files (=50 by default). The oldest log files are removed. In production deployments, you would probably prefer to use established solutions like logrotate instead.
| `--config-file` | Full path to the configuration file. By default `monerod` looks for `bitmonero.conf` in Monero [data directory](/interacting/monerod/overview/#data-directory). TODO: describe configuration file syntax.
| `--data-dir` | Full path to data directory. This is where the blockchain, log files, and p2p network memory are stored. For defaults and details see [data directory](/interacting/monerod/overview/#data-directory).
| `--detach` | Go to background (decouple from the terminal). This is useful for long-running / server scenarios. Typically, you will also want to manage `monerod` daemon with systemd or similar. By default `monerod` runs in a foreground.
| `--non-interactive` | Do not require tty in a foreground mode. Helpful when running in a container. By default `monerod` runs in a foreground and opens stdin for reading. This breaks containerization because no tty gets assigned and `monerod` process crashes. You can make it run in a background with `--detach` but this is inconvenient in a containerized environment because the canonical usage is that the container waits on the main process to exist (forking makes things more complicated).
| `--no-igd` | Disable UPnP port mapping on the router ("Internet Gateway Device"). Add this option to improve security if you are **not** behind a NAT (you can bind directly to public IP or you run through Tor).
| `--max-txpool-weight` | Set maximum transactions pool size in bytes. By default 648000000 (~618MB). These are transactions pending for confirmations (not included in any block).
| `--enforce-dns-checkpointing` | The emergency checkpoints set by [MoneroPulse](/infrastructure/monero-pulse.md) operators will be enforced. It is probably a good idea to set enforcing for unattended nodes. <br/><br/>If encountered block hash does not match corresponding checkpoint, the local blockchain will be rolled back a few blocks, effectively blocking following what MoneroPulse operators consider invalid fork. The log entry will be produced: `ERROR``Local blockchain failed to pass a checkpoint, rolling back!` Eventually, the alternative ("fixed") fork will get heavier and the node will follow it, leaving the "invalid" fork behind.<br/><br/>By default checkpointing only notifies about discrepancy by producing the following log entry: `ERROR``WARNING: local blockchain failed to pass a MoneroPulse checkpoint, and you could be on a fork. You should either sync up from scratch, OR download a fresh blockchain bootstrap, OR enable checkpoint enforcing with the --enforce-dns-checkpointing command-line option`.<br/><br/>Reference: [source code](https://github.com/monero-project/monero/blob/22a6591a70151840381e327f1b41dc27cbdb2ee6/src/cryptonote_core/blockchain.cpp#L3614).
| `--disable-dns-checkpoints` | The [MoneroPulse](/infrastructure/monero-pulse.md) checkpoints set by core developers will be discarded. The checkpoints are apparently still fetched though.
| `--p2p-bind-ip` | Network interface to bind to for p2p network protocol. Default value `0.0.0.0` binds to all network interfaces. This is typically what you want. <br/><br/>You must change this if you want to constrain binding, for example to configure connection through Tor via torsocks: <br/>`DNS_PUBLIC=tcp://1.1.1.1 TORSOCKS_ALLOW_INBOUND=1 torsocks ./monerod --p2p-bind-ip 127.0.0.1--no-igd--hide-my-port`
| `--p2p-bind-port` | TCP port to listen for p2p network connections. Defaults to `18080` for mainnet, `28080` for testnet, and `38080` for stagenet. You normally wouldn't change that. This is helpful to run several nodes on your machine to simulate private Monero p2p network (likely using private Testnet). Example: <br/>`./monerod --p2p-bind-port=48080`
| `--p2p-external-port` | TCP port to listen for p2p network connections on your router. Relevant if you are behind a NAT and still want to accept incoming connections. You must then set this to relevant port on your router. This is to let `monerod` know what to advertise on the network. Default is `0`.
| `--hide-my-port` | `monerod` will still open and listen on the p2p port. However, it will not announce itself as a peer list candidate. Technically, it will return port `0` in a response to p2p handshake (`node_data.my_port = 0` in `get_local_node_data` function). In effect nodes you connect to won't spread your IP to other nodes. To sum up, it is not really hiding, it is more like "do not advertise".
| `--seed-node` | Connect to a node to retrieve other nodes' addresses, and disconnect. If not specified, `monerod` will use hardcoded seed nodes on the first run, and peers cached on disk on subsequent runs.
| `--add-priority-node` | Specify list of nodes to connect to and then attempt to keep the connection open. <br/><br/>To add multiple nodes use the option several times. Example: <br/>`./monerod --add-priority-node=178.128.192.138:18081 --add-priority-node=144.76.202.167:18081`
| `--add-exclusive-node` | Specify list of nodes to connect to only. If this option is given the options `--add-priority-node` and `--seed-node` are ignored. <br/><br/>To add multiple nodes use the option several times. Example: <br/>`./monerod --add-exclusive-node=178.128.192.138:18081 --add-exclusive-node=144.76.202.167:18081`
| `--out-peers` | Set max number of outgoing connections to other nodes. By default 8. Value `-1` represents the code default.
| `--in-peers` | Set max number of incoming connections (nodes actively connecting to you). By default unlimited. Value `-1` represents the code default.
| `--limit-rate-up` | Set outgoing data transfer limit [kB/s]. By default 2048 kB/s. Value `-1` represents the code default.
| `--limit-rate-down` | Set incoming data transfer limit [kB/s]. By default 8192 kB/s. Value `-1` represents the code default.
| `--limit-rate` | Set the same limit value for incoming and outgoing data transfer. By default (`-1`) the individual up/down default limits will be used. It is better to use `--limit-rate-up` and `--limit-rate-down` instead to avoid confusion.
| `--offline` | Do not listen for peers, nor connect to any. Useful for working with a local, archival blockchain.
| `--allow-local-ip` | Allow adding local IP to peer list. Useful mostly for debug purposes when you may want to have multiple nodes on a single machine.
| `--rpc-bind-ip` | IP to listen on. By default `127.0.0.1` because API gives full administrative capabilities over the node. Set it to `0.0.0.0` to listen on all interfaces - but only in connection with one of `*-restricted-*` options **and**`--confirm-external-bind`.
| `--rpc-bind-port` | TCP port to listen on. By default `18081` (mainnet), `28081` (testnet), `38081` (stagenet).
| `--rpc-restricted-bind-port` | TCP port to listen on with the limited version of API. The limited API can be made public to create an Open Node. At the same time, you may firewall the full API port to still enjoy local querying and administration.
| `--confirm-external-bind` | Confirm you consciously set `--rpc-bind-ip` to non-localhost IP and you understand the consequences.
| `--restricted-rpc` | Restrict API to view only commands and do not return privacy sensitive data. Note this does not make sense with `--rpc-restricted-bind-port` because you would end up with two restricted APIs.
| `--rpc-login` | Specify `username[:password]` required to connect to API. Practical usage seems limited because API communication is in plain text over HTTP.
| `--rpc-access-control-origins` | Specify a comma separated list of origins to allow cross origin resource sharing. This is useful if you want to use `monerod` API directly from a web browser via JavaScript (say in a pure-fronted web appp scenario). With this option `monerod` will put proper HTTP CORS headers to its responses. You will also need to set `--rpc-login` if you use this option. Normally though, the API is used by backend app and this option isn't necessary.
| `--max-concurrency` | Max number of threads to use for a parallel jobs. The default value `0` uses the number of CPU threads.
| `--prep-blocks-threads` | Max number of threads to use when computing block hashes (PoW) in groups. Defaults to 4. Decrease this if you don't want `monerod` hog your computer when syncing.
| `--fast-block-sync` | Sync up most of the way by using embedded, "known" block hashes. Pass `1` to turn on and `0` to turn off. This is on (`1`) by default. Normally, for every block the full node must calculate the block hash to verify miner's proof of work. Because the CryptoNight PoW used in Monero is very expensive (even for verification), `monerod` offers skipping these calculations for old blocks. In other words, it's a mechanism to trust `monerod` binary regarding old blocks' PoW validity, to sync up faster.
| `--block-sync-size` | How many blocks are processed in a single batch during chaing synchronization. By default this is 20 blocks for newer history and 100 blocks for older history ("pre v4"). Default behavior is represented by value `0`. Intuitively, the more resources you have, the bigger batch size you may want to try out. Example:<br/>`./monerod --block-sync-size=500`
| `--bootstrap-daemon-address` | The host:port of a "bootstrap" remote open node that the connected wallets can use while this node is still not fully synced. Example:<br/>`./monerod --bootstrap-daemon-address=opennode.xmr-tw.org:18089`. The node will forward selected RPC calls to the bootstrap node. The wallet will handle this automatically and transparently. Obviously, such bootstraping phase has privacy implications similar to directly using a remote node.
| `--bootstrap-daemon-login` | Specify username:password for the bootstrap daemon login (if required). This considers the RPC interface used by the wallet. Normally, open nodes do not require any credentials.
#### Mining
The following options configure **solo mining** using **CPU** with the standard software stack `monerod`. This is mostly useful for:
* generating your [stagenet](/infrastructure/networks#stagenet) or [testnet](/infrastructure/networks#testnet) coins
* experimentation and learning
* if you have super cheap access to vast CPU resources
Be advised though that real mining happens **in pools** and with high-end **GPU-s** instead of CPU-s.
| `--start-mining` | Specify wallet address to mining for. **This must be a [main address](/public-address/main-address)!** It can be neither a subaddres nor integrated address.
| `--mining-threads` | Specify mining threads count. By default ony one thread will be used. For best results, set it to number of your physical cores.
| `--extra-messages-file` | Specify file for extra messages to include into coinbase transactions.
| `--bg-mining-enable` | Enable unobtrusive mining. In this mode mininig will use a small percentage of your system resources to never noticeably slow down your computer. This is intended to encourage people to mine to improve decentralization. That being said chances of finding a block are diminishingly small with solo CPU mining, and even lesser with its unobtrusive version. You can tweak the unobtrusivness / power trade-offs with the further `--bg-*` options below.
| `--bg-mining-ignore-battery` | If true, assumes plugged in when unable to query system power status.
| `--bg-mining-min-idle-interval` | Specify min lookback interval in seconds for determining idle state.
| `--show-time-stats` | Official docs say "Show time-stats when processing blocks/txs and disk synchronization" but it does not seem to produce any output during usual blockchain synchronization.
| `--zmq-rpc-bind-ip` | IP for ZMQ RPC server to listen on. By default `127.0.0.1`. This is not yet widely used as ZMQ interface currently does not provide meaningful advantage over classic JSON-RPC interface. Unfortunately, currently there is no way to disable the ZMQ server.
| `--zmq-rpc-bind-port` | Port for ZMQ RPC server to listen on. By default `18082` for mainnet, `38082` for stagenet, and `28082` for testnet.
| `--version` | Shows `monerod` version to stdout. Example: <br/>`Monero 'Lithium Luna' (v0.12.3.0-release)`
| `--os-version` | Shows build timestamp and target operating system. Example output:<br/>`OS: Linux #1 SMP PREEMPT Fri Aug 24 12:48:58 UTC 2018 4.18.5-arch1-1-ARCH`.
