* Add in an implementation of BP+ based off the paper, intended for clarity and review
This was done as part of my work on FCMPs from Monero, and is copied from https://github.com/kayabaNerve/full-chain-membership-proofs
* Remove crate structure of BP+
* Remove arithmetic circuit code
* Remove AC/VC generators code
* Remove generator transcript
Monero uses non-transcripted static generators.
* Further trimming of generators
* Remove the single range proof
It's unused by Monero and accordingly unhelpful.
* Work on getting BP+ to compile in its new env
* Correct BP+ folder name
* Further tweaks to get closer to compiling
* Remove the ScalarMatrix file
It's only used for AC proofs
* Compiles, with tests passing
* Lock BP+ to Ed25519 instead of the generic Ciphersuite
* Resolve most warnings in BP+
* Make existing bulletproofs test easier to read
* Further strip generators
* Swap G/H as Monero did
* Replace RangeCommitment with Commitment
* Hard-code BP+ h to Ed25519's generator
* Use pub(crate) for BP+, not pub
* Replace initial_transcript with hash_plus
* Rename hash_plus to initial_transcript
* Finish integrating the FCMP BP+ impl
* Move BP+ folder
* Correct no-std support
* Rename "long_n" to eta
* Add note on non-prime order dfg points
* Move monero-serai from std to std-shims, where possible
* no-std fixes
* Make the HttpRpc its own feature, thiserror only on std
* Drop monero-rs's epee for a homegrown one
We only need it for a single function. While I tried jeffro's, it didn't work
out of the box, had three unimplemented!s, and is no where near viable for
no_std.
Fixes#182, though should be further tested.
* no-std monero-serai
* Allow base58-monero via git
* cargo fmt
lazy_static, if no_std environments were used, effectively required always
using spin locks. This resolves the ergonomics of that while adopting Rust std
code.
no_std does still use a spin based solution. Theoretically, we could use
atomics, yet writing our own Mutex wasn't a priority.
* Partial move to ff 0.13
It turns out the newly released k256 0.12 isn't on ff 0.13, preventing further
work at this time.
* Update all crates to work on ff 0.13
The provided curves still need to be expanded to fit the new API.
* Finish adding dalek-ff-group ff 0.13 constants
* Correct FieldElement::product definition
Also stops exporting macros.
* Test most new parts of ff 0.13
* Additionally test ff-group-tests with BLS12-381 and the pasta curves
We only tested curves from RustCrypto. Now we test a curve offered by zk-crypto,
the group behind ff/group, and the pasta curves, which is by Zcash (though
Zcash developers are also behind zk-crypto).
* Finish Ed448
Fully specifies all constants, passes all tests in ff-group-tests, and finishes moving to ff-0.13.
* Add RustCrypto/elliptic-curves to allowed git repos
Needed due to k256/p256 incorrectly defining product.
* Finish writing ff 0.13 tests
* Add additional comments to dalek
* Further comments
* Update ethereum-serai to ff 0.13
* Label the version as an alpha
* Add versions to Cargo.tomls
* Update to Zeroize 1.5
* Drop patch versions from monero-serai Cargo.toml
* Add a repository field
* Move generators to OUT_DIR
IIRC, I didn't do this originally as it constantly re-generated them.
Unfortunately, since cargo is complaining about .generators, we have to.
* Remove Timelock::fee_weight
Transaction::fee_weight's has a comment, "Assumes Timelock::None since
this library won't let you create a TX with a timelock". Accordingly,
this is dead code.
Creates a new monero-generators crate so the monero crate can run the
code in question at build time.
Saves several seconds from running the tests.
Closes https://github.com/serai-dex/serai/issues/101.
* Apply Zeroize to nonces used in Bulletproofs
Also makes bit decomposition constant time for a given amount of
outputs.
* Fix nonce reuse for single-signer CLSAG
* Attach Zeroize to most structures in Monero, and ZOnDrop to anything with private data
* Zeroize private keys and nonces
* Merge prepare_outputs and prepare_transactions
* Ensure CLSAG is constant time
* Pass by borrow where needed, bug fixes
The past few commitments have been one in-progress chunk which I've
broken up as best read.
* Add Zeroize to FROST structs
Still needs to zeroize internally, yet next step. Not quite as
aggressive as Monero, partially due to the limitations of HashMaps,
partially due to less concern about metadata, yet does still delete a
few smaller items of metadata (group key, context string...).
* Remove Zeroize from most Monero multisig structs
These structs largely didn't have private data, just fields with private
data, yet those fields implemented ZeroizeOnDrop making them already
covered. While there is still traces of the transaction left in RAM,
fully purging that was never the intent.
* Use Zeroize within dleq
bitvec doesn't offer Zeroize, so a manual zeroing has been implemented.
* Use Zeroize for random_nonce
It isn't perfect, due to the inability to zeroize the digest, and due to
kp256 requiring a few transformations. It does the best it can though.
Does move the per-curve random_nonce to a provided one, which is allowed
as of https://github.com/cfrg/draft-irtf-cfrg-frost/pull/231.
* Use Zeroize on FROST keygen/signing
* Zeroize constant time multiexp.
* Correct when FROST keygen zeroizes
* Move the FROST keys Arc into FrostKeys
Reduces amount of instances in memory.
* Manually implement Debug for FrostCore to not leak the secret share
* Misc bug fixes
* clippy + multiexp test bug fixes
* Correct FROST key gen share summation
It leaked our own share for ourself.
* Fix cross-group DLEq tests
Considering they take 7 seconds to generate, thanks to #68, the ability
to generate them at the start instead of on first BP is greatly
appreciated.
Also performs minor cleanups regarding BPs.
* Use a struct in an enum for Bulletproofs
* verification bp working for just one proof
* add some more assert tests
* Clean BP verification
* Implement batch verification
* Add a debug assertion w_cache isn't 0
It's initially set to 0 and if not updated, this would be broken.
* Correct Monero workflow yaml
* Again try to corrent Monero workflow yaml
* Again
* Finally
* Re-apply weights as required by Bulletproofs
Removing these was insecure and my fault.
Co-authored-by: DangerousFreedom <dangfreed@tutanota.com>
* Initial stab at Bulletproofs+
Does move around the existing Bulletproofs code, does still work as
expected.
* Make the Clsag RCTPrunable type work with BP and BP+
* Initial set of BP+ bug fixes
* Further bug fixes
* Remove RING_LEN as a constant
* Monero v16 TX support
Doesn't implement view tags, nor going back to v14, nor the updated BP
clawback logic.
* Support v14 and v16 at the same time
Introduces missing CLSAG checks. The only difference now should be the
additional rejection of torsioned points, which is relevant to
https://github.com/serai-dex/serai/issues/25. Considering this is only
currently used for FROST verification, this should be fine.
Closes https://github.com/serai-dex/serai/issues/19 by making it
irrelevant.
Increases priority of https://github.com/serai-dex/serai/issues/68, as
now it's used for the BP generators which are done at first-proof.
Also merges BP's stricter hash_to_point with the library's, since CLSAG
has the same bound.
* Initial attempt at Bulletproofs
I don't know why this doesn't work. The generators and hash_cache lines
up without issue. AFAICT, the inner product proof is valid as well, as
are all included formulas.
* Add yinvpow asserts
* Clean code
* Correct bad imports
* Fix the definition of TWO_N
Bulletproofs work now :D
* Tidy up a bit
* fmt + clippy
* Compile a variety of XMR dependencies with optimizations, even under dev
The Rust bulletproof implementation is 8% slower than C right now, under
release. This is acceptable, even if suboptimal. Under debug, they take
a quarter of a second to two seconds though, depending on the amount of
outputs, which justifies this move.
* Remove unnecessary deref in BPs
