* Rename the coins folder to networks
Ethereum isn't a coin. It's a network.
Resolves#357.
* More renames of coins -> networks in orchestration
* Correct paths in tests/
* cargo fmt
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
* Clean up Ethereum
* Consistent contract address for deployed contracts
* Flesh out Router a bit
* Add a Deployer for DoS-less deployment
* Implement Router-finding
* Use CREATE2 helper present in ethers
* Move from CREATE2 to CREATE
Bit more streamlined for our use case.
* Document ethereum-serai
* Tidy tests a bit
* Test updateSeraiKey
* Use encodePacked for updateSeraiKey
* Take in the block hash to read state during
* Add a Sandbox contract to the Ethereum integration
* Add retrieval of transfers from Ethereum
* Add inInstruction function to the Router
* Augment our handling of InInstructions events with a check the transfer event also exists
* Have the Deployer error upon failed deployments
* Add --via-ir
* Make get_transaction test-only
We only used it to get transactions to confirm the resolution of Eventualities.
Eventualities need to be modularized. By introducing the dedicated
confirm_completion function, we remove the need for a non-test get_transaction
AND begin this modularization (by no longer explicitly grabbing a transaction
to check with).
* Modularize Eventuality
Almost fully-deprecates the Transaction trait for Completion. Replaces
Transaction ID with Claim.
* Modularize the Scheduler behind a trait
* Add an extremely basic account Scheduler
* Add nonce uses, key rotation to the account scheduler
* Only report the account Scheduler empty after transferring keys
Also ban payments to the branch/change/forward addresses.
* Make fns reliant on state test-only
* Start of an Ethereum integration for the processor
* Add a session to the Router to prevent updateSeraiKey replaying
This would only happen if an old key was rotated to again, which would require
n-of-n collusion (already ridiculous and a valid fault attributable event). It
just clarifies the formal arguments.
* Add a RouterCommand + SignMachine for producing it to coins/ethereum
* Ethereum which compiles
* Have branch/change/forward return an option
Also defines a UtxoNetwork extension trait for MAX_INPUTS.
* Make external_address exclusively a test fn
* Move the "account" scheduler to "smart contract"
* Remove ABI artifact
* Move refund/forward Plan creation into the Processor
We create forward Plans in the scan path, and need to know their exact fees in
the scan path. This requires adding a somewhat wonky shim_forward_plan method
so we can obtain a Plan equivalent to the actual forward Plan for fee reasons,
yet don't expect it to be the actual forward Plan (which may be distinct if
the Plan pulls from the global state, such as with a nonce).
Also properly types a Scheduler addendum such that the SC scheduler isn't
cramming the nonce to use into the N::Output type.
* Flesh out the Ethereum integration more
* Two commits ago, into the **Scheduler, not Processor
* Remove misc TODOs in SC Scheduler
* Add constructor to RouterCommandMachine
* RouterCommand read, pairing with the prior added write
* Further add serialization methods
* Have the Router's key included with the InInstruction
This does not use the key at the time of the event. This uses the key at the
end of the block for the event. Its much simpler than getting the full event
streams for each, checking when they interlace.
This does not read the state. Every block, this makes a request for every
single key update and simply chooses the last one. This allows pruning state,
only keeping the event tree. Ideally, we'd also introduce a cache to reduce the
cost of the filter (small in events yielded, long in blocks searched).
Since Serai doesn't have any forwarding TXs, nor Branches, nor change, all of
our Plans should solely have payments out, and there's no expectation of a Plan
being made under one key broken by it being received by another key.
* Add read/write to InInstruction
* Abstract the ABI for Call/OutInstruction in ethereum-serai
* Fill out signable_transaction for Ethereum
* Move ethereum-serai to alloy
Resolves#331.
* Use the opaque sol macro instead of generated files
* Move the processor over to the now-alloy-based ethereum-serai
* Use the ecrecover provided by alloy
* Have the SC use nonce for rotation, not session (an independent nonce which wasn't synchronized)
* Always use the latest keys for SC scheduled plans
* get_eventuality_completions for Ethereum
* Finish fleshing out the processor Ethereum integration as needed for serai-processor tests
This doesn't not support any actual deployments, not even the ones simulated by
serai-processor-docker-tests.
* Add alloy-simple-request-transport to the GH workflows
* cargo update
* Clarify a few comments and make one check more robust
* Use a string for 27.0 in .github
* Remove optional from no-longer-optional dependencies in processor
* Add alloy to git deny exception
* Fix no longer optional specification in processor's binaries feature
* Use a version of foundry from 2024
* Correct fetching Bitcoin TXs in the processor docker tests
* Update rustls to resolve RUSTSEC warnings
* Use the monthly nightly foundry, not the deleted daily nightly
* Monero: fix decoy selection algo and add test for latest spendable
- DSA only selected coinbase outputs and didn't match the wallet2
implementation
- Added test to make sure DSA will select a decoy output from the
most recent unlocked block
- Made usage of "height" in DSA consistent with other usage of
"height" in Monero code (height == num blocks in chain)
- Rely on monerod RPC response for output's unlocked status
* xmr runner tests mine until outputs are unlocked
* fingerprintable canoncial select decoys
* Separate fingerprintable canonical function
Makes it simpler for callers who are unconcered with consistent
canonical output selection across multiple clients to rely on
the simpler Decoy::select and not worry about fingerprintable
canonical
* fix merge conflicts
* Put back TODO for issue #104
* Fix incorrect check on distribution len
The RingCT distribution on mainnet doesn't start until well after
genesis, so the distribution length is expected to be < height.
To be clear, this was my mistake from this series of changes
to the DSA. I noticed this mistake because the DSA would error
when running on mainnet.
* monero: Use fee priority enums from monero repo CLI/RPC wallets
* Update processor for fee priority change
* Remove FeePriority::Default
Done in consultation with @j-berman.
The RPC/CLI/GUI almost always adjust up except barring very explicit commands,
hence why FeePriority 0 is now only exposed via the explicit command of
FeePriority::Custom { priority: 0 }.
Also helps with terminology.
---------
Co-authored-by: Luke Parker <lukeparker5132@gmail.com>
Moves from concatted Dockerfiles to pseudo-templated Dockerfiles via a dedicated Rust program.
Removes the unmaintained kubernetes, not because we shouldn't have/use it, but because it's unmaintained and needs to be reworked before it's present again.
Replaces the compose with the work in the new orchestrator binary which spawns everything as expected. While this arguably re-invents the wheel, it correctly manages secrets and handles the variadic Dockerfiles.
Also adds an unrelated patch for zstd and simplifies running services a bit by greater utilizing the existing infrastructure.
---
* Delete all Dockerfile fragments, add new orchestator to generate Dockerfiles
Enables greater templating.
Also delete the unmaintained kubernetes folder *for now*. This should be
restored in the future.
* Use Dockerfiles from the orchestator
* Ignore Dockerfiles in the git repo
* Remove CI job to check Dockerfiles are as expected now that they're no longer committed
* Remove old Dockerfiles from repo
* Use Debian for monero-wallet-rpc
* Remove replace_cmds for proper usage of entry-dev
Consolidates ports a bit.
Updates serai-docker-tests from "compose" to "build".
* Only write a new dockerfile if it's distinct
Preserves the updated time metadata.
* Update serai-docker-tests
* Correct the path Dockerfiles are built from
* Correct inclusion of orchestration folder in Docker builds
* Correct debug/release flagging in the cargo command
Apparently, --debug isn't an effective NOP yet an error.
* Correct path used to run the Serai node within a Dockerfile
* Correct path in Monero Dockerfile
* Attempt storing monerod in /usr/bin
* Use sudo to move into /usr/bin in CI
* Correct 18.3.0 to 18.3.1
* Escape * with quotes
* Update deny.toml, ADD orchestration in runtime Dockerfile
* Add --detach to the Monero GH CI
* Diversify dockerfiles by network
* Fixes to network-diversified orchestration
* Bitcoin and Monero testnet scripts
* Permissions and tweaks
* Flatten scripts folders
* Add missing folder specification to Monero Dockerfile
* Have monero-wallet-rpc specify the monerod login
* Have the Docker CMD specify env variables inserted at time of Dockerfile generation
They're overrideable with the global enviornment as for tests. This enables
variable generation in orchestrator and output to productionized Docker files
without creating a life-long file within the Docker container.
* Don't add Dockerfiles into Docker containers now that they have secrets
Solely add the source code for them as needed to satisfy the workspace bounds.
* Download arm64 Monero on arm64
* Ensure constant host architecture when reproducibly building the wasm
Host architecture, for some reason, can effect the generated code despite the
target architecture always being foreign to the host architecture.
* Randomly generate infrastructure keys
* Have orchestrator generate a key, be able to create/start containers
* Ensure bash is used over sh
* Clean dated docs
* Change how quoting occurs
* Standardize to sh
* Have Docker test build the dev Dockerfiles
* Only key_gen once
* cargo update
Adds a patch for zstd and reconciles the breaking nightly change which just
occurred.
* Use a dedicated network for Serai
Also fixes SERAI_HOSTNAME passed to coordinator.
* Support providing a key over the env for the Serai node
* Enable and document running daemons for tests via serai-orchestrator
Has running containers under the dev network port forward the RPC ports.
* Use volumes for bitcoin/monero
* Use bitcoin's run.sh in GH CI
* Only use the volume for testnet (not dev)
* Schedule re-attempts and add a (not filled out) match statement to actually execute them
A comment explains the methodology. To copy it here:
"""
This is because we *always* re-attempt any protocol which had participation. That doesn't
mean we *should* re-attempt this protocol.
The alternatives were:
1) Note on-chain we completed a protocol, halting re-attempts upon 34%.
2) Vote on-chain to re-attempt a protocol.
This schema doesn't have any additional messages upon the success case (whereas
alternative #1 does) and doesn't have overhead (as alternative #2 does, sending votes and
then preprocesses. This only sends preprocesses).
"""
Any signing protocol which reaches sufficient participation will be
re-attempted until it no longer does.
* Have the Substrate scanner track DKG removals/completions for the Tributary code
* Don't keep trying to publish a participant removal if we've already set keys
* Pad out the re-attempt match a bit more
* Have CosignEvaluator reload from the DB
* Correctly schedule cosign re-attempts
* Actuall spawn new DKG removal attempts
* Use u32 for Batch ID in SubstrateSignableId, finish Batch re-attempt routing
The batch ID was an opaque [u8; 5] which also included the network, yet that's
redundant and unhelpful.
* Clarify a pair of TODOs in the coordinator
* Remove old TODO
* Final comment cleanup
* Correct usage of TARGET_BLOCK_TIME in reattempt scheduler
It's in ms and I assumed it was in s.
* Have coordinator tests drop BatchReattempts which aren't relevant yet may exist
* Bug fix and pointless oddity removal
We scheduled a re-attempt upon receiving 2/3rds of preprocesses and upon
receiving 2/3rds of shares, so any signing protocol could cause two re-attempts
(not one more).
The coordinator tests randomly generated the Batch ID since it was prior an
opaque byte array. While that didn't break the test, it was pointless and did
make the already-succeeded check before re-attempting impossible to hit.
* Add log statements, correct dead-lock in coordinator tests
* Increase pessimistic timeout on recv_message to compensate for tighter best-case timeouts
* Further bump timeout by a minute
AFAICT, GH failed by just a few seconds.
This also is worst-case in a single instance, making it fine to be decently long.
* Further further bump timeout due to lack of distinct error
* Make it clear not providing a change address is fingerprintable
When no change address is provided, all change is shunted to the
fee. This PR makes it clear to the caller that it is fingerprintable
when the caller does this.
* Review comments
* Remove NetworkId from processor-messages
Because intent binds to the sender/receiver, it's not needed for intent.
The processor knows what the network is.
The coordinator knows which to use because it's sending this message to the
processor for that network.
Also removes the unused zeroize.
* ProcessorMessage::Completed use Session instead of key
* Move SubstrateSignId to Session
* Finish replacing key with session
For some reason, these constantly failed for me while waiting for the key pair
to confirm. This adds a sleep during the mining process, to ensure blocks
actually have time between them, and mines several more blocks to handle the
median code recently added.
* Add SignalsConfig to chain_spec
* Correct multiexp feature flagging for rand_core std
* Remove bincode for borsh
Replaces a non-canonical encoding with a canonical encoding which additionally
should be faster.
Also fixes an issue where we used bincode in transcripts where it cannot be
trusted.
This ended up fixing a myriad of other bugs observed, unfortunately.
Accordingly, it either has to be merged or the bug fixes from it must be ported
to a new PR.
* Make serde optional, minimize usage
* Make borsh an optional dependency of substrate/ crates
* Remove unused dependencies
* Use [u8; 64] where possible in the processor messages
* Correct borsh feature flagging
* Add a function to deterministically decide which Serai blocks should be co-signed
Has a 5 minute latency between co-signs, also used as the maximal latency
before a co-sign is started.
* Get all active tributaries we're in at a specific block
* Add and route CosignSubstrateBlock, a new provided TX
* Split queued cosigns per network
* Rename BatchSignId to SubstrateSignId
* Add SubstrateSignableId, a meta-type for either Batch or Block, and modularize around it
* Handle the CosignSubstrateBlock provided TX
* Revert substrate_signer.rs to develop (and patch to still work)
Due to SubstrateSigner moving when the prior multisig closes, yet cosigning
occurring with the most recent key, a single SubstrateSigner can be reused.
We could manage multiple SubstrateSigners, yet considering the much lower
specifications for cosigning, I'd rather treat it distinctly.
* Route cosigning through the processor
* Add note to rename SubstrateSigner post-PR
I don't want to do so now in order to preserve the diff's clarity.
* Implement cosign evaluation into the coordinator
* Get tests to compile
* Bug fixes, mark blocks without cosigners available as cosigned
* Correct the ID Batch preprocesses are saved under, add log statements
* Create a dedicated function to handle cosigns
* Correct the flow around Batch verification/queueing
Verifying `Batch`s could stall when a `Batch` was signed before its
predecessors/before the block it's contained in was cosigned (the latter being
inevitable as we can't sign a block containing a signed batch before signing
the batch).
Now, Batch verification happens on a distinct async task in order to not block
the handling of processor messages. This task is the sole caller of verify in
order to ensure last_verified_batch isn't unexpectedly mutated.
When the processor message handler needs to access it, or needs to queue a
Batch, it associates the DB TXN with a lock preventing the other task from
doing so.
This lock, as currently implemented, is a poor and inefficient design. It
should be modified to the pattern used for cosign management. Additionally, a
new primitive of a DB-backed channel may be immensely valuable.
Fixes a standing potential deadlock and a deadlock introduced with the
cosigning protocol.
* Working full-stack tests
After the last commit, this only required extending a timeout.
* Replace "co-sign" with "cosign" to make finding text easier
* Update the coordinator tests to support cosigning
* Inline prior_batch calculation to prevent panic on rotation
Noticed when doing a final review of the branch.
* De-duplicate Dockerfiles by using a bash file to concatenate common parts
Resolves#375.
Dockerfiles are still committed to the repo to avoid a dependency on bash.
* Add a CI job to confirm the committed dockerfiles are the currently generated ones
* Create dedicated Dockerfiles per processor network
Ensures the compromising of network-specific dependencies doesn't lead to a
compromise of the build process for all processors.
* Dockerfile corrections
* Correct call to build processor Docker image in tests/processor
The prior system spawned a new connection per request to enable parallelism,
yet kept hitting hyper::IncompleteMessages I couldn't track down. This
attempts to resolve those by a long-lived socket.
Halves the amount of requests per-authenticated RPC call, and accordingly is
likely still better overall.
I don't believe this is resolved yet but this is still worth pushing.
* Update the coordinator to give key shares based on weight, not based on existence
Participants are now identified by their starting index. While this compiles,
the following is unimplemented:
1) A conversion for DKG `i` values. It assumes the threshold `i` values used
will be identical for the MuSig signature used to confirm the DKG.
2) Expansion from compressed values to full values before forwarding to the
processor.
* Add a fn to the DkgConfirmer to convert `i` values as needed
Also removes TODOs regarding Serai ensuring validator key uniqueness +
validity. The current infra achieves both.
* Have the Tributary DB track participation by shares, not by count
* Prevent a node from obtaining 34% of the maximum amount of key shares
This is actually mainly intended to set a bound on message sizes in the
coordinator. Message sizes are amplified by the amount of key shares held, so
setting an upper bound on said amount lets it determine constants. While that
upper bound could be 150, that'd be unreasonable and increase the potential for
DoS attacks.
* Correct the mechanism to detect if sufficient accumulation has occured
It used to check if the latest accumulation hit the required threshold. Now,
accumulations may jump past the required threshold. The required mechanism is
to check the threshold wasn't prior met and is now met.
* Finish updating the coordinator to handle a multiple key share per validator environment
* Adjust stategy re: preventing noce reuse in DKG Confirmer
* Add TODOs regarding dropped transactions, add possible TODO fix
* Update tests/coordinator
This doesn't add new multi-key-share tests, it solely updates the existing
single key-share tests to compile and run, with the necessary fixes to the
coordinator.
* Update processor key_gen to handle generating multiple key shares at once
* Update SubstrateSigner
* Update signer, clippy
* Update processor tests
* Update processor docker tests
* Updates to modern dockertest
* More updates to latest dockertest
* Update Cargo.lock to dockertest with handle restored
* clippy coordinator tests
* clippy full-stack tests
* Remove kayabaNerve branch for official repo's latest commit hash
* Update serai-client, remove reliance on the existence of a handle fn
* Don't use the hex encoding of unique_id in dockertests
Gets our hostnames just below 64 bytes, resolving test failures on at least
Debian-based systems.
* Use Network::Isolated for all dockertest instances
* Correct error from prior commit's edits
Replaces plan IDs with key + ID, letting the coordinator determine the sessions
for the plans.
Properly scopes which plan IDs are set on which tributaries, and ensures we
have the necessary tributaries at time of handling.
* Revert "Correct the prior documented TOCTOU"
This reverts commit d50fe87801.
* Correct the prior documented TOCTOU
d50fe87801 edited the challenge for the Batch to
fix it. This won't produce Batch n+1 until Batch n is successfully published
and verified. It's an alternative strategy able to be reviewed, with a much
smaller impact to scope.
Now, if a malicious validator set publishes a malicious `Batch` at the last
moment, it'll cause all future `Batch`s signed by the next validator set to
require a bool being set (yet they never will set it).
This will prevent the handover.
The only overhead is having two distinct `batch_message` calls on-chain.
Renames Update to SignedBatch.
Checks Batch equality via a hash of the InInstructions. That prevents needing
to keep the Batch in node state or TX introspect.
key used to be empty. As part of implementing support for multisig rotation
into the coordinator, it was easiest to set the key to the substrate key. While
the coordinator and full stack tests were updated, the processor tests weren't.
This does that.
* Design and document a multisig rotation flow
* Make Scanner::eventualities a HashMap so it's per-key
* Don't drop eventualities, always follow through on them
Technical improvements made along the way.
* Start creating an isolate object to manage multisigs, which doesn't require being a signer
Removes key from SubstrateBlock.
* Move Scanner/Scheduler under multisigs
* Move Batch construction into MultisigManager
* Clarify "should" in Multisig Rotation docs
* Add block_number to MultisigManager, as it controls the scanner
* Move sign_plans into MultisigManager
Removes ThresholdKeys from prepare_send.
* Make SubstrateMutable an alias for MultisigManager
* Rewrite Multisig Rotation
The prior scheme had an exploit possible where funds were sent to the old
multisig, then burnt on Serai to send from the new multisig, locking liquidity
for 6 hours. While a fee could be applied to stragglers, to make this attack
unprofitable, the newly described scheme avoids all this.
* Add mini
mini is a miniature version of Serai, emphasizing Serai's nature as a
collection of independent clocks. The intended use is to identify race
conditions and prove protocols are comprehensive regarding when certain clocks
tick.
This uses loom, a prior candidate for evaluating the processor/coordinator as
free of race conditions (#361).
* Use mini to prove a race condition in the current multisig rotation docs, and prove safety of alternatives
Technically, the prior commit had mini prove the race condition.
The docs currently say the activation block of the new multisig is the block
after the next Batch's. If the two next Batches had already entered the
mempool, prior to set_keys being called, the second next Batch would be
expected to contain the new key's data yet fail to as the key wasn't public
when the Batch was actually created.
The naive solution is to create a Batch, publish it, wait until it's included,
and only then scan the next block. This sets a bound of
`Batch publication time < block time`. Optimistically, we can publish a Batch
in 24s while our shortest block time is 2m. Accordingly, we should be fine with
the naive solution which doesn't take advantage of throughput. #333 may
significantly change latency however and require an algorithm whose throughput
exceeds the rate of blocks created.
In order to re-introduce parallelization, enabling throughput, we need to
define a safe range of blocks to scan without Serai ordering the first one.
mini demonstrates safety of scanning n blocks Serai hasn't acknowledged, so
long as the first is scanned before block n+1 is (shifting the n-block window).
The docs will be updated next, to reflect this.
* Fix Multisig Rotation
I believe this is finally good enough to be final.
1) Fixes the race condition present in the prior document, as demonstrated by
mini.
`Batch`s for block `n` and `n+1`, may have been in the mempool when a
multisig's activation block was set to `n`. This would cause a potentially
distinct `Batch` for `n+1`, despite `n+1` already having a signed `Batch`.
2) Tightens when UIs should use the new multisig to prevent eclipse attacks,
and protection against `Batch` publication delays.
3) Removes liquidity fragmentation by tightening flow/handling of latency.
4) Several clarifications and documentation of reasoning.
5) Correction of "prior multisig" to "all prior multisigs" regarding historical
verification, with explanation why.
* Clarify terminology in mini
Synchronizes it from my original thoughts on potential schema to the design
actually created.
* Remove most of processor's README for a reference to docs/processor
This does drop some misc commentary, though none too beneficial. The section on
scanning, deemed sufficiently beneficial, has been moved to a document and
expanded on.
* Update scanner TODOs in line with new docs
* Correct documentation on Bitcoin::Block::time, and Block::time
* Make the scanner in MultisigManager no longer public
* Always send ConfirmKeyPair, regardless of if in-set
* Cargo.lock changes from a prior commit
* Add a policy document on defining a Canonical Chain
I accidentally committed a version of this with a few headers earlier, and this
is a proper version.
* Competent MultisigManager::new
* Update processor's comments
* Add mini to copied files
* Re-organize Scanner per multisig rotation document
* Add RUST_LOG trace targets to e2e tests
* Have the scanner wait once it gets too far ahead
Also bug fixes.
* Add activation blocks to the scanner
* Split received outputs into existing/new in MultisigManager
* Select the proper scheduler
* Schedule multisig activation as detailed in documentation
* Have the Coordinator assert if multiple `Batch`s occur within a block
While the processor used to have ack_up_to_block, enabling skips in the block
acked, support for this was removed while reworking it for multiple multisigs.
It should happen extremely infrequently.
While it would still be beneficial to have, if multiple `Batch`s could occur
within a block (with the complexity here not being worth adding that ban as a
policy), multiple `Batch`s were blocked for DoS reasons.
* Schedule payments to the proper multisig
* Correct >= to <
* Use the new multisig's key for change on schedule
* Don't report External TXs to prior multisig once deprecated
* Forward from the old multisig to the new one at all opportunities
* Move unfulfilled payments in queue from prior to new multisig
* Create MultisigsDb, splitting it out of MainDb
Drops the call to finish_signing from the Signer. While this will cause endless
re-attempts, the Signer will still consider them completed and drop them,
making this an O(n) cost at boot even if we did nothing from here.
The MultisigManager should call finish_signing once the Scanner completes the
Eventuality.
* Don't check Scanner-emitted completions, trust they are completions
Prevents needing to use async code to mark the completion and creates a
fault-free model. The current model, on fault, would cause a lack of marked
completion in the signer.
* Fix a possible panic in the processor
A shorter-chain reorg could cause this assert to trip. It's fixed by
de-duplicating the data, as the assertion checked consistency. Without the
potential for inconsistency, it's unnecessary.
* Document why an existing TODO isn't valid
* Change when we drop payments for being to the change address
The earlier timing prevents creating Plans solely to the branch address,
causing the payments to be dropped, and the TX to become an effective
aggregation TX.
* Extensively document solutions to Eventualities being potentially created after having already scanned their resolutions
* When closing, drop External/Branch outputs which don't cause progress
* Properly decide if Change outputs should be forward or not when closing
This completes all code needed to make the old multisig have a finite lifetime.
* Commentary on forwarding schemes
* Provide a 1 block window, with liquidity fragmentation risks, due to latency
On Bitcoin, this will be 10 minutes for the relevant Batch to be confirmed. On
Monero, 2 minutes. On Ethereum, ~6 minutes.
Also updates the Multisig Rotation document with the new forwarding plan.
* Implement transaction forwarding from old multisig to new multisig
Identifies a fault where Branch outputs which shouldn't be dropped may be, if
another output fulfills their next step. Locking Branch fulfillment down to
only Branch outputs is not done in this commit, but will be in the next.
* Only let Branch outputs fulfill branches
* Update TODOs
* Move the location of handling signer events to avoid a race condition
* Avoid a deadlock by using a RwLock on a single txn instead of two txns
* Move Batch ID out of the Scanner
* Increase from one block of latency on new keys activation to two
For Monero, this offered just two minutes when our latency to publish a Batch
is around a minute already. This does increase the time our liquidity can be
fragmented by up to 20 minutes (Bitcoin), yet it's a stupid attack only
possible once a week (when we rotate). Prioritizing normal users' transactions
not being subject to forwarding is more important here.
Ideally, we'd not do +2 blocks yet plus `time`, such as +10 minutes, making
this agnostic of the underlying network's block scheduling. This is a
complexity not worth it.
* Split MultisigManager::substrate_block into multiple functions
* Further tweaks to substrate_block
* Acquire a lock on all Scanner operations after calling ack_block
Gives time to call register_eventuality and initiate signing.
* Merge sign_plans into substrate_block
Also ensure the Scanner's lock isn't prematurely released.
* Use a HashMap to pass to-be-forwarded instructions, not the DB
* Successfully determine in ClosingExisting
* Move from 2 blocks of latency when rotating to 10 minutes
Superior as noted in 6d07af92ce10cfd74c17eb3400368b0150eb36d7, now trivial to
implement thanks to prior commit.
* Add note justifying measuring time in blocks when rotating
* Implement delaying of outputs received early to the new multisig per specification
* Documentation on why Branch outputs don't have the race condition concerns Change do
Also ensures 6 hours is at least N::CONFIRMATIONS, for sanity purposes.
* Remove TODO re: sanity checking Eventualities
We sanity check the Plan the Eventuality is derived from, and the Eventuality
is handled moments later (in the same file, with a clear call path). There's no
reason to add such APIs to Eventualities for a sanity check given that.
* Add TODO(now) for TODOs which must be done in this branch
Also deprecates a pair of TODOs to TODO2, and accepts the flow of the Signer
having the Eventuality.
* Correct errors in potential/future flow descriptions
* Accept having a single Plan Vec
Per the following code consuming it, there's no benefit to bifurcating it by
key.
* Only issue sign_transaction on boot for the proper signer
* Only set keys when participating in their construction
* Misc progress
Only send SubstrateBlockAck when we have a signer, as it's only used to tell
the Tributary of what Plans are being signed in response to this block.
Only immediately sets substrate_signer if session is 0.
On boot, doesn't panic if we don't have an active key (as we wouldn't if only
joining the next multisig). Continues.
* Correctly detect and set retirement block
Modifies the retirement block from first block meeting requirements to block
CONFIRMATIONS after.
Adds an ack flow to the Scanner's Confirmed event and Block event to accomplish
this, which may deadlock at this time (will be fixed shortly).
Removes an invalid await (after a point declared unsafe to use await) from
MultisigsManager::next_event.
* Remove deadlock in multisig_completed and document alternative
The alternative is simpler, albeit less efficient. There's no reason to adopt
it now, yet perhaps if it benefits modeling?
* Handle the final step of retirement, dropping the old key and setting new to existing
* Remove TODO about emitting a Block on every step
If we emit on NewAsChange, we lose the purpose of the NewAsChange period.
The only concern is if we reach ClosingExisting, and nothing has happened, then
all coins will still be in the old multisig until something finally does. This
isn't a problem worth solving, as it's latency under exceptional dead time.
* Add TODO about potentially not emitting a Block event for the reitrement block
* Restore accidentally deleted CI file
* Pair of slight tweaks
* Add missing if statement
* Disable an assertion when testing
One of the test flows currently abuses the Scanner in a way triggering it.
