serai/networks/monero/wallet/tests/runner/mod.rs

362 lines
11 KiB
Rust
Raw Normal View History

Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
use core::ops::Deref;
use std_shims::sync::LazyLock;
Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
use zeroize::Zeroizing;
use rand_core::OsRng;
use curve25519_dalek::{constants::ED25519_BASEPOINT_TABLE, scalar::Scalar};
use tokio::sync::Mutex;
use monero_simple_request_rpc::SimpleRequestRpc;
use monero_wallet::{
ringct::RctType,
transaction::Transaction,
block::Block,
rpc::{Rpc, FeeRate},
address::{Network, AddressType, MoneroAddress},
DEFAULT_LOCK_WINDOW, ViewPair, GuaranteedViewPair, WalletOutput, Scanner,
};
mod builder;
pub use builder::SignableTransactionBuilder;
pub fn ring_len(rct_type: RctType) -> usize {
match rct_type {
RctType::ClsagBulletproof => 11,
RctType::ClsagBulletproofPlus => 16,
_ => panic!("ring size unknown for RctType"),
}
}
pub fn random_address() -> (Scalar, ViewPair, MoneroAddress) {
let spend = Scalar::random(&mut OsRng);
let spend_pub = &spend * ED25519_BASEPOINT_TABLE;
let view = Zeroizing::new(Scalar::random(&mut OsRng));
(
spend,
ViewPair::new(spend_pub, view.clone()).unwrap(),
MoneroAddress::new(
Network::Mainnet,
AddressType::Legacy,
spend_pub,
view.deref() * ED25519_BASEPOINT_TABLE,
),
)
}
#[allow(unused)]
pub fn random_guaranteed_address() -> (Scalar, GuaranteedViewPair, MoneroAddress) {
let spend = Scalar::random(&mut OsRng);
let spend_pub = &spend * ED25519_BASEPOINT_TABLE;
let view = Zeroizing::new(Scalar::random(&mut OsRng));
(
spend,
GuaranteedViewPair::new(spend_pub, view.clone()).unwrap(),
MoneroAddress::new(
Network::Mainnet,
AddressType::Legacy,
spend_pub,
view.deref() * ED25519_BASEPOINT_TABLE,
),
)
}
// TODO: Support transactions already on-chain
// TODO: Don't have a side effect of mining blocks more blocks than needed under race conditions
pub async fn mine_until_unlocked(
rpc: &SimpleRequestRpc,
addr: &MoneroAddress,
tx_hash: [u8; 32],
) -> Block {
// mine until tx is in a block
let mut height = rpc.get_height().await.unwrap();
let mut found = false;
let mut block = None;
while !found {
let inner_block = rpc.get_block_by_number(height - 1).await.unwrap();
found = match inner_block.transactions.iter().find(|&&x| x == tx_hash) {
Some(_) => {
block = Some(inner_block);
true
}
None => {
height = rpc.generate_blocks(addr, 1).await.unwrap().1 + 1;
false
}
}
}
// Mine until tx's outputs are unlocked
for _ in 0 .. (DEFAULT_LOCK_WINDOW - 1) {
rpc.generate_blocks(addr, 1).await.unwrap();
}
block.unwrap()
}
// Mines 60 blocks and returns an unlocked miner TX output.
#[allow(dead_code)]
pub async fn get_miner_tx_output(rpc: &SimpleRequestRpc, view: &ViewPair) -> WalletOutput {
let mut scanner = Scanner::new(view.clone());
// Mine 60 blocks to unlock a miner TX
let start = rpc.get_height().await.unwrap();
rpc.generate_blocks(&view.legacy_address(Network::Mainnet), 60).await.unwrap();
let block = rpc.get_block_by_number(start).await.unwrap();
scanner
.scan(rpc.get_scannable_block(block).await.unwrap())
.unwrap()
.ignore_additional_timelock()
.swap_remove(0)
Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
}
/// Make sure the weight and fee match the expected calculation.
pub fn check_weight_and_fee(tx: &Transaction, fee_rate: FeeRate) {
let Transaction::V2 { proofs: Some(ref proofs), .. } = tx else { panic!("TX wasn't RingCT") };
let fee = proofs.base.fee;
let weight = tx.weight();
let expected_weight = fee_rate.calculate_weight_from_fee(fee);
assert_eq!(weight, expected_weight);
let expected_fee = fee_rate.calculate_fee_from_weight(weight);
assert_eq!(fee, expected_fee);
}
pub async fn rpc() -> SimpleRequestRpc {
let rpc =
SimpleRequestRpc::new("http://serai:seraidex@127.0.0.1:18081".to_string()).await.unwrap();
const BLOCKS_TO_MINE: usize = 110;
// Only run once
if rpc.get_height().await.unwrap() > BLOCKS_TO_MINE {
return rpc;
}
let addr = MoneroAddress::new(
Network::Mainnet,
AddressType::Legacy,
&Scalar::random(&mut OsRng) * ED25519_BASEPOINT_TABLE,
&Scalar::random(&mut OsRng) * ED25519_BASEPOINT_TABLE,
);
// Mine enough blocks to ensure decoy availability
rpc.generate_blocks(&addr, BLOCKS_TO_MINE).await.unwrap();
rpc
}
pub(crate) static SEQUENTIAL: LazyLock<Mutex<()>> = LazyLock::new(|| Mutex::new(()));
Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
#[macro_export]
macro_rules! async_sequential {
($(async fn $name: ident() $body: block)*) => {
$(
#[tokio::test]
async fn $name() {
let guard = runner::SEQUENTIAL.lock().await;
Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
let local = tokio::task::LocalSet::new();
local.run_until(async move {
if let Err(err) = tokio::task::spawn_local(async move { $body }).await {
drop(guard);
Err(err).unwrap()
}
}).await;
}
)*
}
}
#[macro_export]
macro_rules! test {
(
$name: ident,
(
$first_tx: expr,
$first_checks: expr,
),
$((
$tx: expr,
$checks: expr,
)$(,)?),*
) => {
async_sequential! {
async fn $name() {
use core::{ops::Deref, any::Any};
#[cfg(feature = "multisig")]
use std::collections::HashMap;
use zeroize::Zeroizing;
use rand_core::{RngCore, OsRng};
use curve25519_dalek::{constants::ED25519_BASEPOINT_TABLE, scalar::Scalar};
#[cfg(feature = "multisig")]
use frost::{
curve::Ed25519,
Participant,
tests::{THRESHOLD, key_gen},
};
use monero_wallet::{
ringct::RctType,
rpc::FeePriority,
address::Network,
2024-07-08 04:30:42 +00:00
ViewPair, Scanner, OutputWithDecoys,
Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
send::{Change, SignableTransaction, Eventuality},
};
use runner::{
SignableTransactionBuilder, ring_len, random_address, rpc, mine_until_unlocked,
get_miner_tx_output, check_weight_and_fee,
};
type Builder = SignableTransactionBuilder;
// Run each function as both a single signer and as a multisig
#[allow(clippy::redundant_closure_call)]
for multisig in [false, true] {
// Only run the multisig variant if multisig is enabled
if multisig {
#[cfg(not(feature = "multisig"))]
continue;
}
let spend = Zeroizing::new(Scalar::random(&mut OsRng));
#[cfg(feature = "multisig")]
let keys = key_gen::<_, Ed25519>(&mut OsRng);
let spend_pub = if !multisig {
spend.deref() * ED25519_BASEPOINT_TABLE
} else {
#[cfg(not(feature = "multisig"))]
panic!("Multisig branch called without the multisig feature");
#[cfg(feature = "multisig")]
keys[&Participant::new(1).unwrap()].group_key().0
};
let rpc = rpc().await;
let view_priv = Zeroizing::new(Scalar::random(&mut OsRng));
let mut outgoing_view = Zeroizing::new([0; 32]);
OsRng.fill_bytes(outgoing_view.as_mut());
let view = ViewPair::new(spend_pub, view_priv.clone()).unwrap();
let addr = view.legacy_address(Network::Mainnet);
let miner_tx = get_miner_tx_output(&rpc, &view).await;
let rct_type = match rpc.get_hardfork_version().await.unwrap() {
14 => RctType::ClsagBulletproof,
15 | 16 => RctType::ClsagBulletproofPlus,
_ => panic!("unrecognized hardfork version"),
};
let builder = SignableTransactionBuilder::new(
rct_type,
outgoing_view,
Change::new(
2024-07-09 00:00:09 +00:00
ViewPair::new(
Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
&Scalar::random(&mut OsRng) * ED25519_BASEPOINT_TABLE,
Zeroizing::new(Scalar::random(&mut OsRng))
).unwrap(),
2024-07-09 00:00:09 +00:00
None,
Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
),
rpc.get_fee_rate(FeePriority::Unimportant).await.unwrap(),
);
let sign = |tx: SignableTransaction| {
let spend = spend.clone();
#[cfg(feature = "multisig")]
let keys = keys.clone();
2024-07-09 00:00:09 +00:00
assert_eq!(&SignableTransaction::read(&mut tx.serialize().as_slice()).unwrap(), &tx);
Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
let eventuality = Eventuality::from(tx.clone());
let tx = if !multisig {
tx.sign(&mut OsRng, &spend).unwrap()
} else {
#[cfg(not(feature = "multisig"))]
panic!("multisig branch called without the multisig feature");
#[cfg(feature = "multisig")]
{
let mut machines = HashMap::new();
for i in (1 ..= THRESHOLD).map(|i| Participant::new(i).unwrap()) {
machines.insert(i, tx.clone().multisig(&keys[&i]).unwrap());
}
frost::tests::sign_without_caching(&mut OsRng, machines, &[])
}
};
assert_eq!(&eventuality.extra(), &tx.prefix().extra, "eventuality extra was distinct");
assert!(eventuality.matches(&tx.clone().into()), "eventuality didn't match");
Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
tx
};
// TODO: Generate a distinct wallet for each transaction to prevent overlap
let next_addr = addr;
let temp = Box::new({
let mut builder = builder.clone();
2024-07-08 04:30:42 +00:00
let input = OutputWithDecoys::fingerprintable_deterministic_new(
Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
&mut OsRng,
&rpc,
ring_len(rct_type),
rpc.get_height().await.unwrap(),
2024-07-08 04:30:42 +00:00
miner_tx,
).await.unwrap();
builder.add_input(input);
Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
let (tx, state) = ($first_tx)(rpc.clone(), builder, next_addr).await;
let fee_rate = tx.fee_rate().clone();
let signed = sign(tx);
rpc.publish_transaction(&signed).await.unwrap();
let block =
mine_until_unlocked(&rpc, &random_address().2, signed.hash()).await;
let block = rpc.get_scannable_block(block).await.unwrap();
Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
let tx = rpc.get_transaction(signed.hash()).await.unwrap();
check_weight_and_fee(&tx, fee_rate);
let scanner = Scanner::new(view.clone());
($first_checks)(rpc.clone(), block, tx, scanner, state).await
});
#[allow(unused_variables, unused_mut, unused_assignments)]
let mut carried_state: Box<dyn Any> = temp;
$(
let (tx, state) = ($tx)(
rct_type,
rpc.clone(),
builder.clone(),
next_addr,
*carried_state.downcast().unwrap()
).await;
let fee_rate = tx.fee_rate().clone();
let signed = sign(tx);
rpc.publish_transaction(&signed).await.unwrap();
let block =
mine_until_unlocked(&rpc, &random_address().2, signed.hash()).await;
let block = rpc.get_scannable_block(block).await.unwrap();
Clean the Monero lib for auditing (#577) * Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+ * Rename Bulletproofs to Bulletproof, since they are a single Bulletproof Also bifurcates prove with prove_plus, and adds a few documentation items. * Make CLSAG signing private Also adds a bit more documentation and does a bit more tidying. * Remove the distribution cache It's a notable bandwidth/performance improvement, yet it's not ready. We need a dedicated Distribution struct which is managed by the wallet and passed in. While we can do that now, it's not currently worth the effort. * Tidy Borromean/MLSAG a tad * Remove experimental feature from monero-serai * Move amount_decryption into EncryptedAmount::decrypt * Various RingCT doc comments * Begin crate smashing * Further documentation, start shoring up API boundaries of existing crates * Document and clean clsag * Add a dedicated send/recv CLSAG mask struct Abstracts the types used internally. Also moves the tests from monero-serai to monero-clsag. * Smash out monero-bulletproofs Removes usage of dalek-ff-group/multiexp for curve25519-dalek. Makes compiling in the generators an optional feature. Adds a structured batch verifier which should be notably more performant. Documentation and clean up still necessary. * Correct no-std builds for monero-clsag and monero-bulletproofs * Tidy and document monero-bulletproofs I still don't like the impl of the original Bulletproofs... * Error if missing documentation * Smash out MLSAG * Smash out Borromean * Tidy up monero-serai as a meta crate * Smash out RPC, wallet * Document the RPC * Improve docs a bit * Move Protocol to monero-wallet * Incomplete work on using Option to remove panic cases * Finish documenting monero-serai * Remove TODO on reading pseudo_outs for AggregateMlsagBorromean * Only read transactions with one Input::Gen or all Input::ToKey Also adds a helper to fetch a transaction's prefix. * Smash out polyseed * Smash out seed * Get the repo to compile again * Smash out Monero addresses * Document cargo features Credit to @hinto-janai for adding such sections to their work on documenting monero-serai in #568. * Fix deserializing v2 miner transactions * Rewrite monero-wallet's send code I have yet to redo the multisig code and the builder. This should be much cleaner, albeit slower due to redoing work. This compiles with clippy --all-features. I have to finish the multisig/builder for --all-targets to work (and start updating the rest of Serai). * Add SignableTransaction Read/Write * Restore Monero multisig TX code * Correct invalid RPC type def in monero-rpc * Update monero-wallet tests to compile Some are _consistently_ failing due to the inputs we attempt to spend being too young. I'm unsure what's up with that. Most seem to pass _consistently_, implying it's not a random issue yet some configuration/env aspect. * Clean and document monero-address * Sync rest of repo with monero-serai changes * Represent height/block number as a u32 * Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner Also cleans the Scanner impl. * Remove non-small-order view key bound Guaranteed addresses are in fact guaranteed even with this due to prefixing key images causing zeroing the ECDH to not zero the shared key. * Finish documenting monero-serai * Correct imports for no-std * Remove possible panic in monero-serai on systems < 32 bits This was done by requiring the system's usize can represent a certain number. * Restore the reserialize chain binary * fmt, machete, GH CI * Correct misc TODOs in monero-serai * Have Monero test runner evaluate an Eventuality for all signed TXs * Fix a pair of bugs in the decoy tests Unfortunately, this test is still failing. * Fix remaining bugs in monero-wallet tests * Reject torsioned spend keys to ensure we can spend the outputs we scan * Tidy inlined epee code in the RPC * Correct the accidental swap of stagenet/testnet address bytes * Remove unused dep from processor * Handle Monero fee logic properly in the processor * Document v2 TX/RCT output relation assumed when scanning * Adjust how we mine the initial blocks due to some CI test failures * Fix weight estimation for RctType::ClsagBulletproof TXs * Again increase the amount of blocks we mine prior to running tests * Correct the if check about when to mine blocks on start Finally fixes the lack of decoy candidates failures in CI. * Run Monero on Debian, even for internal testnets Change made due to a segfault incurred when locally testing. https://github.com/monero-project/monero/issues/9141 for the upstream. * Don't attempt running tests on the verify-chain binary Adds a minimum XMR fee to the processor and runs fmt. * Increase minimum Monero fee in processor I'm truly unsure why this is required right now. * Distinguish fee from necessary_fee in monero-wallet If there's no change, the fee is difference of the inputs to the outputs. The prior code wouldn't check that amount is greater than or equal to the necessary fee, and returning the would-be change amount as the fee isn't necessarily helpful. Now the fee is validated in such cases and the necessary fee is returned, enabling operating off of that. * Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
let tx = rpc.get_transaction(signed.hash()).await.unwrap();
if stringify!($name) != "spend_one_input_to_two_outputs_no_change" {
// Skip weight and fee check for the above test because when there is no change,
// the change is added to the fee
check_weight_and_fee(&tx, fee_rate);
}
#[allow(unused_assignments)]
{
let scanner = Scanner::new(view.clone());
carried_state = Box::new(($checks)(rpc.clone(), block, tx, scanner, state).await);
}
)*
}
}
}
}
}