2023-01-24 20:22:07 +00:00
|
|
|
use rand_core::{OsRng, RngCore};
|
|
|
|
|
|
|
|
use serde::Deserialize;
|
|
|
|
use serde_json::json;
|
2023-01-16 21:17:54 +00:00
|
|
|
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
use monero_simple_request_rpc::SimpleRequestRpc;
|
|
|
|
use monero_wallet::{
|
2023-01-30 09:27:39 +00:00
|
|
|
transaction::Transaction,
|
2024-09-06 05:43:31 +00:00
|
|
|
rpc::{FeePriority, Rpc},
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
address::{Network, SubaddressIndex, MoneroAddress},
|
|
|
|
extra::{MAX_ARBITRARY_DATA_SIZE, Extra, PaymentId},
|
|
|
|
Scanner,
|
2023-01-16 21:17:54 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
mod runner;
|
|
|
|
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
#[derive(Clone, Copy, PartialEq, Eq)]
|
|
|
|
enum AddressSpec {
|
|
|
|
Legacy,
|
|
|
|
LegacyIntegrated([u8; 8]),
|
|
|
|
Subaddress(SubaddressIndex),
|
|
|
|
}
|
|
|
|
|
|
|
|
#[derive(Deserialize, Debug)]
|
|
|
|
struct EmptyResponse {}
|
|
|
|
|
|
|
|
async fn make_integrated_address(rpc: &SimpleRequestRpc, payment_id: [u8; 8]) -> String {
|
2023-07-24 08:53:59 +00:00
|
|
|
#[derive(Debug, Deserialize)]
|
2023-01-24 20:22:07 +00:00
|
|
|
struct IntegratedAddressResponse {
|
|
|
|
integrated_address: String,
|
|
|
|
}
|
|
|
|
|
|
|
|
let res = rpc
|
|
|
|
.json_rpc_call::<IntegratedAddressResponse>(
|
|
|
|
"make_integrated_address",
|
|
|
|
Some(json!({ "payment_id": hex::encode(payment_id) })),
|
|
|
|
)
|
|
|
|
.await
|
|
|
|
.unwrap();
|
|
|
|
|
|
|
|
res.integrated_address
|
|
|
|
}
|
|
|
|
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
async fn initialize_rpcs() -> (SimpleRequestRpc, SimpleRequestRpc, MoneroAddress) {
|
|
|
|
let wallet_rpc = SimpleRequestRpc::new("http://127.0.0.1:18082".to_string()).await.unwrap();
|
2023-01-16 21:17:54 +00:00
|
|
|
let daemon_rpc = runner::rpc().await;
|
|
|
|
|
2023-07-24 08:53:59 +00:00
|
|
|
#[derive(Debug, Deserialize)]
|
|
|
|
struct AddressResponse {
|
|
|
|
address: String,
|
|
|
|
}
|
|
|
|
|
|
|
|
let mut wallet_id = [0; 8];
|
|
|
|
OsRng.fill_bytes(&mut wallet_id);
|
|
|
|
let _: EmptyResponse = wallet_rpc
|
|
|
|
.json_rpc_call(
|
|
|
|
"create_wallet",
|
|
|
|
Some(json!({ "filename": hex::encode(wallet_id), "language": "English" })),
|
|
|
|
)
|
|
|
|
.await
|
|
|
|
.unwrap();
|
|
|
|
|
|
|
|
let address: AddressResponse =
|
|
|
|
wallet_rpc.json_rpc_call("get_address", Some(json!({ "account_index": 0 }))).await.unwrap();
|
|
|
|
|
|
|
|
// Fund the new wallet
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
let address = MoneroAddress::from_str(Network::Mainnet, &address.address).unwrap();
|
|
|
|
daemon_rpc.generate_blocks(&address, 70).await.unwrap();
|
2023-07-24 08:53:59 +00:00
|
|
|
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
(wallet_rpc, daemon_rpc, address)
|
2023-01-24 20:22:07 +00:00
|
|
|
}
|
|
|
|
|
2023-03-11 15:31:58 +00:00
|
|
|
async fn from_wallet_rpc_to_self(spec: AddressSpec) {
|
2023-01-24 20:22:07 +00:00
|
|
|
// initialize rpc
|
|
|
|
let (wallet_rpc, daemon_rpc, wallet_rpc_addr) = initialize_rpcs().await;
|
2023-01-16 21:17:54 +00:00
|
|
|
|
|
|
|
// make an addr
|
|
|
|
let (_, view_pair, _) = runner::random_address();
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
let addr = match spec {
|
|
|
|
AddressSpec::Legacy => view_pair.legacy_address(Network::Mainnet),
|
|
|
|
AddressSpec::LegacyIntegrated(payment_id) => {
|
|
|
|
view_pair.legacy_integrated_address(Network::Mainnet, payment_id)
|
|
|
|
}
|
|
|
|
AddressSpec::Subaddress(index) => view_pair.subaddress(Network::Mainnet, index),
|
|
|
|
};
|
2023-01-16 21:17:54 +00:00
|
|
|
|
|
|
|
// refresh & make a tx
|
2023-07-24 08:53:59 +00:00
|
|
|
let _: EmptyResponse = wallet_rpc.json_rpc_call("refresh", None).await.unwrap();
|
|
|
|
|
|
|
|
#[derive(Debug, Deserialize)]
|
|
|
|
struct TransferResponse {
|
|
|
|
tx_hash: String,
|
|
|
|
}
|
|
|
|
let tx: TransferResponse = wallet_rpc
|
|
|
|
.json_rpc_call(
|
|
|
|
"transfer",
|
|
|
|
Some(json!({
|
|
|
|
"destinations": [{"address": addr.to_string(), "amount": 1_000_000_000_000u64 }],
|
|
|
|
})),
|
2023-01-16 21:17:54 +00:00
|
|
|
)
|
|
|
|
.await
|
|
|
|
.unwrap();
|
2023-07-24 08:53:59 +00:00
|
|
|
let tx_hash = hex::decode(tx.tx_hash).unwrap().try_into().unwrap();
|
2023-01-16 21:17:54 +00:00
|
|
|
|
2024-09-06 05:43:31 +00:00
|
|
|
let fee_rate = daemon_rpc.get_fee_rate(FeePriority::Unimportant).await.unwrap();
|
2023-07-19 19:06:05 +00:00
|
|
|
|
2023-01-16 21:17:54 +00:00
|
|
|
// unlock it
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
let block = runner::mine_until_unlocked(&daemon_rpc, &wallet_rpc_addr, tx_hash).await;
|
2023-01-16 21:17:54 +00:00
|
|
|
|
2023-07-19 19:06:05 +00:00
|
|
|
// Create the scanner
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
let mut scanner = Scanner::new(view_pair);
|
2023-01-16 21:17:54 +00:00
|
|
|
if let AddressSpec::Subaddress(index) = spec {
|
|
|
|
scanner.register_subaddress(index);
|
|
|
|
}
|
|
|
|
|
2023-07-19 19:06:05 +00:00
|
|
|
// Retrieve it and scan it
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
let output =
|
|
|
|
scanner.scan(&daemon_rpc, &block).await.unwrap().not_additionally_locked().swap_remove(0);
|
|
|
|
assert_eq!(output.transaction(), tx_hash);
|
2023-01-16 21:17:54 +00:00
|
|
|
|
2024-09-06 05:43:31 +00:00
|
|
|
runner::check_weight_and_fee(&daemon_rpc.get_transaction(tx_hash).await.unwrap(), fee_rate);
|
2023-07-19 19:06:05 +00:00
|
|
|
|
2023-01-16 21:17:54 +00:00
|
|
|
match spec {
|
2024-02-20 01:45:50 +00:00
|
|
|
AddressSpec::Subaddress(index) => {
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
assert_eq!(output.subaddress(), Some(index));
|
|
|
|
assert_eq!(output.payment_id(), Some(PaymentId::Encrypted([0u8; 8])));
|
2024-02-20 01:45:50 +00:00
|
|
|
}
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
AddressSpec::LegacyIntegrated(payment_id) => {
|
|
|
|
assert_eq!(output.payment_id(), Some(PaymentId::Encrypted(payment_id)));
|
|
|
|
assert_eq!(output.subaddress(), None);
|
2023-01-16 21:17:54 +00:00
|
|
|
}
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
AddressSpec::Legacy => {
|
|
|
|
assert_eq!(output.subaddress(), None);
|
|
|
|
assert_eq!(output.payment_id(), Some(PaymentId::Encrypted([0u8; 8])));
|
2023-07-08 15:29:05 +00:00
|
|
|
}
|
2023-01-16 21:17:54 +00:00
|
|
|
}
|
|
|
|
assert_eq!(output.commitment().amount, 1000000000000);
|
|
|
|
}
|
|
|
|
|
|
|
|
async_sequential!(
|
2023-03-11 15:31:58 +00:00
|
|
|
async fn receipt_of_wallet_rpc_tx_standard() {
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
from_wallet_rpc_to_self(AddressSpec::Legacy).await;
|
2023-01-16 21:17:54 +00:00
|
|
|
}
|
|
|
|
|
2023-03-11 15:31:58 +00:00
|
|
|
async fn receipt_of_wallet_rpc_tx_subaddress() {
|
|
|
|
from_wallet_rpc_to_self(AddressSpec::Subaddress(SubaddressIndex::new(0, 1).unwrap())).await;
|
2023-01-16 21:17:54 +00:00
|
|
|
}
|
|
|
|
|
2023-03-11 15:31:58 +00:00
|
|
|
async fn receipt_of_wallet_rpc_tx_integrated() {
|
2023-01-16 21:17:54 +00:00
|
|
|
let mut payment_id = [0u8; 8];
|
|
|
|
OsRng.fill_bytes(&mut payment_id);
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
from_wallet_rpc_to_self(AddressSpec::LegacyIntegrated(payment_id)).await;
|
2023-01-16 21:17:54 +00:00
|
|
|
}
|
|
|
|
);
|
2023-01-24 20:22:07 +00:00
|
|
|
|
2023-07-24 08:53:59 +00:00
|
|
|
#[derive(PartialEq, Eq, Debug, Deserialize)]
|
|
|
|
struct Index {
|
|
|
|
major: u32,
|
|
|
|
minor: u32,
|
|
|
|
}
|
|
|
|
|
|
|
|
#[derive(Debug, Deserialize)]
|
|
|
|
struct Transfer {
|
|
|
|
payment_id: String,
|
|
|
|
subaddr_index: Index,
|
|
|
|
amount: u64,
|
|
|
|
}
|
|
|
|
|
|
|
|
#[derive(Debug, Deserialize)]
|
|
|
|
struct TransfersResponse {
|
|
|
|
transfer: Transfer,
|
2024-02-20 01:18:31 +00:00
|
|
|
transfers: Vec<Transfer>,
|
2023-07-24 08:53:59 +00:00
|
|
|
}
|
|
|
|
|
2023-01-24 20:22:07 +00:00
|
|
|
test!(
|
2023-03-11 15:31:58 +00:00
|
|
|
send_to_wallet_rpc_standard,
|
2023-01-24 20:22:07 +00:00
|
|
|
(
|
|
|
|
|_, mut builder: Builder, _| async move {
|
|
|
|
// initialize rpc
|
|
|
|
let (wallet_rpc, _, wallet_rpc_addr) = initialize_rpcs().await;
|
|
|
|
|
|
|
|
// add destination
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
builder.add_payment(wallet_rpc_addr, 1000000);
|
2023-07-24 08:53:59 +00:00
|
|
|
(builder.build().unwrap(), wallet_rpc)
|
2023-01-24 20:22:07 +00:00
|
|
|
},
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
|_, _, tx: Transaction, _, data: SimpleRequestRpc| async move {
|
2023-01-24 20:22:07 +00:00
|
|
|
// confirm receipt
|
2023-07-24 08:53:59 +00:00
|
|
|
let _: EmptyResponse = data.json_rpc_call("refresh", None).await.unwrap();
|
|
|
|
let transfer: TransfersResponse = data
|
|
|
|
.json_rpc_call("get_transfer_by_txid", Some(json!({ "txid": hex::encode(tx.hash()) })))
|
|
|
|
.await
|
|
|
|
.unwrap();
|
|
|
|
assert_eq!(transfer.transfer.subaddr_index, Index { major: 0, minor: 0 });
|
|
|
|
assert_eq!(transfer.transfer.amount, 1000000);
|
2024-02-20 01:45:50 +00:00
|
|
|
assert_eq!(transfer.transfer.payment_id, hex::encode([0u8; 8]));
|
2023-01-24 20:22:07 +00:00
|
|
|
},
|
|
|
|
),
|
|
|
|
);
|
|
|
|
|
|
|
|
test!(
|
2023-03-11 15:31:58 +00:00
|
|
|
send_to_wallet_rpc_subaddress,
|
2023-01-24 20:22:07 +00:00
|
|
|
(
|
|
|
|
|_, mut builder: Builder, _| async move {
|
|
|
|
// initialize rpc
|
|
|
|
let (wallet_rpc, _, _) = initialize_rpcs().await;
|
|
|
|
|
2023-07-24 08:53:59 +00:00
|
|
|
// make the subaddress
|
|
|
|
#[derive(Debug, Deserialize)]
|
|
|
|
struct AccountResponse {
|
|
|
|
address: String,
|
|
|
|
account_index: u32,
|
|
|
|
}
|
|
|
|
let addr: AccountResponse = wallet_rpc.json_rpc_call("create_account", None).await.unwrap();
|
|
|
|
assert!(addr.account_index != 0);
|
2023-01-24 20:22:07 +00:00
|
|
|
|
2023-07-24 08:53:59 +00:00
|
|
|
builder
|
|
|
|
.add_payment(MoneroAddress::from_str(Network::Mainnet, &addr.address).unwrap(), 1000000);
|
|
|
|
(builder.build().unwrap(), (wallet_rpc, addr.account_index))
|
2023-01-24 20:22:07 +00:00
|
|
|
},
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
|_, _, tx: Transaction, _, data: (SimpleRequestRpc, u32)| async move {
|
2023-01-24 20:22:07 +00:00
|
|
|
// confirm receipt
|
2023-07-24 08:53:59 +00:00
|
|
|
let _: EmptyResponse = data.0.json_rpc_call("refresh", None).await.unwrap();
|
|
|
|
let transfer: TransfersResponse = data
|
|
|
|
.0
|
|
|
|
.json_rpc_call(
|
|
|
|
"get_transfer_by_txid",
|
|
|
|
Some(json!({ "txid": hex::encode(tx.hash()), "account_index": data.1 })),
|
|
|
|
)
|
|
|
|
.await
|
|
|
|
.unwrap();
|
|
|
|
assert_eq!(transfer.transfer.subaddr_index, Index { major: data.1, minor: 0 });
|
|
|
|
assert_eq!(transfer.transfer.amount, 1000000);
|
2024-02-20 01:45:50 +00:00
|
|
|
assert_eq!(transfer.transfer.payment_id, hex::encode([0u8; 8]));
|
2023-03-11 15:31:58 +00:00
|
|
|
|
|
|
|
// Make sure only one R was included in TX extra
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
assert!(Extra::read::<&[u8]>(&mut tx.prefix().extra.as_ref())
|
2023-03-11 15:31:58 +00:00
|
|
|
.unwrap()
|
|
|
|
.keys()
|
|
|
|
.unwrap()
|
|
|
|
.1
|
|
|
|
.is_none());
|
2023-01-24 20:22:07 +00:00
|
|
|
},
|
|
|
|
),
|
|
|
|
);
|
|
|
|
|
2024-02-20 01:18:31 +00:00
|
|
|
test!(
|
|
|
|
send_to_wallet_rpc_subaddresses,
|
|
|
|
(
|
|
|
|
|_, mut builder: Builder, _| async move {
|
|
|
|
// initialize rpc
|
|
|
|
let (wallet_rpc, daemon_rpc, _) = initialize_rpcs().await;
|
|
|
|
|
|
|
|
// make the subaddress
|
|
|
|
#[derive(Debug, Deserialize)]
|
|
|
|
struct AddressesResponse {
|
|
|
|
addresses: Vec<String>,
|
|
|
|
address_index: u32,
|
|
|
|
}
|
|
|
|
let addrs: AddressesResponse = wallet_rpc
|
|
|
|
.json_rpc_call("create_address", Some(json!({ "account_index": 0, "count": 2 })))
|
|
|
|
.await
|
|
|
|
.unwrap();
|
|
|
|
assert!(addrs.address_index != 0);
|
|
|
|
assert!(addrs.addresses.len() == 2);
|
|
|
|
|
|
|
|
builder.add_payments(&[
|
|
|
|
(MoneroAddress::from_str(Network::Mainnet, &addrs.addresses[0]).unwrap(), 1000000),
|
|
|
|
(MoneroAddress::from_str(Network::Mainnet, &addrs.addresses[1]).unwrap(), 2000000),
|
|
|
|
]);
|
|
|
|
(builder.build().unwrap(), (wallet_rpc, daemon_rpc, addrs.address_index))
|
|
|
|
},
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
|_, _, tx: Transaction, _, data: (SimpleRequestRpc, SimpleRequestRpc, u32)| async move {
|
2024-02-20 01:18:31 +00:00
|
|
|
// confirm receipt
|
|
|
|
let _: EmptyResponse = data.0.json_rpc_call("refresh", None).await.unwrap();
|
|
|
|
let transfer: TransfersResponse = data
|
|
|
|
.0
|
|
|
|
.json_rpc_call(
|
|
|
|
"get_transfer_by_txid",
|
|
|
|
Some(json!({ "txid": hex::encode(tx.hash()), "account_index": 0 })),
|
|
|
|
)
|
|
|
|
.await
|
|
|
|
.unwrap();
|
|
|
|
|
|
|
|
assert_eq!(transfer.transfers.len(), 2);
|
|
|
|
for t in transfer.transfers {
|
|
|
|
match t.amount {
|
|
|
|
1000000 => assert_eq!(t.subaddr_index, Index { major: 0, minor: data.2 }),
|
|
|
|
2000000 => assert_eq!(t.subaddr_index, Index { major: 0, minor: data.2 + 1 }),
|
|
|
|
_ => unreachable!(),
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Make sure 3 additional pub keys are included in TX extra
|
|
|
|
let keys =
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
Extra::read::<&[u8]>(&mut tx.prefix().extra.as_ref()).unwrap().keys().unwrap().1.unwrap();
|
2024-02-20 01:18:31 +00:00
|
|
|
|
|
|
|
assert_eq!(keys.len(), 3);
|
|
|
|
},
|
|
|
|
),
|
|
|
|
);
|
|
|
|
|
2023-01-24 20:22:07 +00:00
|
|
|
test!(
|
2023-03-11 15:31:58 +00:00
|
|
|
send_to_wallet_rpc_integrated,
|
2023-01-24 20:22:07 +00:00
|
|
|
(
|
|
|
|
|_, mut builder: Builder, _| async move {
|
|
|
|
// initialize rpc
|
|
|
|
let (wallet_rpc, _, _) = initialize_rpcs().await;
|
|
|
|
|
|
|
|
// make the addr
|
|
|
|
let mut payment_id = [0u8; 8];
|
|
|
|
OsRng.fill_bytes(&mut payment_id);
|
2023-07-24 08:53:59 +00:00
|
|
|
let addr = make_integrated_address(&wallet_rpc, payment_id).await;
|
2023-01-24 20:22:07 +00:00
|
|
|
|
|
|
|
builder.add_payment(MoneroAddress::from_str(Network::Mainnet, &addr).unwrap(), 1000000);
|
|
|
|
(builder.build().unwrap(), (wallet_rpc, payment_id))
|
|
|
|
},
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
|_, _, tx: Transaction, _, data: (SimpleRequestRpc, [u8; 8])| async move {
|
2023-01-24 20:22:07 +00:00
|
|
|
// confirm receipt
|
2023-07-24 08:53:59 +00:00
|
|
|
let _: EmptyResponse = data.0.json_rpc_call("refresh", None).await.unwrap();
|
|
|
|
let transfer: TransfersResponse = data
|
|
|
|
.0
|
|
|
|
.json_rpc_call("get_transfer_by_txid", Some(json!({ "txid": hex::encode(tx.hash()) })))
|
|
|
|
.await
|
|
|
|
.unwrap();
|
|
|
|
assert_eq!(transfer.transfer.subaddr_index, Index { major: 0, minor: 0 });
|
|
|
|
assert_eq!(transfer.transfer.payment_id, hex::encode(data.1));
|
|
|
|
assert_eq!(transfer.transfer.amount, 1000000);
|
2023-01-24 20:22:07 +00:00
|
|
|
},
|
|
|
|
),
|
|
|
|
);
|
2023-01-30 09:25:46 +00:00
|
|
|
|
|
|
|
test!(
|
2023-03-11 15:31:58 +00:00
|
|
|
send_to_wallet_rpc_with_arb_data,
|
2023-01-30 09:25:46 +00:00
|
|
|
(
|
|
|
|
|_, mut builder: Builder, _| async move {
|
|
|
|
// initialize rpc
|
|
|
|
let (wallet_rpc, _, wallet_rpc_addr) = initialize_rpcs().await;
|
|
|
|
|
|
|
|
// add destination
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
builder.add_payment(wallet_rpc_addr, 1000000);
|
2023-01-30 09:25:46 +00:00
|
|
|
|
2023-03-11 10:47:25 +00:00
|
|
|
// Make 2 data that is the full 255 bytes
|
2023-01-30 09:25:46 +00:00
|
|
|
for _ in 0 .. 2 {
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
let data = vec![b'a'; MAX_ARBITRARY_DATA_SIZE];
|
2023-07-08 15:29:05 +00:00
|
|
|
builder.add_data(data).unwrap();
|
2023-01-30 09:25:46 +00:00
|
|
|
}
|
|
|
|
|
2023-07-24 08:53:59 +00:00
|
|
|
(builder.build().unwrap(), wallet_rpc)
|
2023-01-30 09:25:46 +00:00
|
|
|
},
|
Clean the Monero lib for auditing (#577)
* Remove unsafe creation of dalek_ff_group::EdwardsPoint in BP+
* Rename Bulletproofs to Bulletproof, since they are a single Bulletproof
Also bifurcates prove with prove_plus, and adds a few documentation items.
* Make CLSAG signing private
Also adds a bit more documentation and does a bit more tidying.
* Remove the distribution cache
It's a notable bandwidth/performance improvement, yet it's not ready. We need a
dedicated Distribution struct which is managed by the wallet and passed in.
While we can do that now, it's not currently worth the effort.
* Tidy Borromean/MLSAG a tad
* Remove experimental feature from monero-serai
* Move amount_decryption into EncryptedAmount::decrypt
* Various RingCT doc comments
* Begin crate smashing
* Further documentation, start shoring up API boundaries of existing crates
* Document and clean clsag
* Add a dedicated send/recv CLSAG mask struct
Abstracts the types used internally.
Also moves the tests from monero-serai to monero-clsag.
* Smash out monero-bulletproofs
Removes usage of dalek-ff-group/multiexp for curve25519-dalek.
Makes compiling in the generators an optional feature.
Adds a structured batch verifier which should be notably more performant.
Documentation and clean up still necessary.
* Correct no-std builds for monero-clsag and monero-bulletproofs
* Tidy and document monero-bulletproofs
I still don't like the impl of the original Bulletproofs...
* Error if missing documentation
* Smash out MLSAG
* Smash out Borromean
* Tidy up monero-serai as a meta crate
* Smash out RPC, wallet
* Document the RPC
* Improve docs a bit
* Move Protocol to monero-wallet
* Incomplete work on using Option to remove panic cases
* Finish documenting monero-serai
* Remove TODO on reading pseudo_outs for AggregateMlsagBorromean
* Only read transactions with one Input::Gen or all Input::ToKey
Also adds a helper to fetch a transaction's prefix.
* Smash out polyseed
* Smash out seed
* Get the repo to compile again
* Smash out Monero addresses
* Document cargo features
Credit to @hinto-janai for adding such sections to their work on documenting
monero-serai in #568.
* Fix deserializing v2 miner transactions
* Rewrite monero-wallet's send code
I have yet to redo the multisig code and the builder. This should be much
cleaner, albeit slower due to redoing work.
This compiles with clippy --all-features. I have to finish the multisig/builder
for --all-targets to work (and start updating the rest of Serai).
* Add SignableTransaction Read/Write
* Restore Monero multisig TX code
* Correct invalid RPC type def in monero-rpc
* Update monero-wallet tests to compile
Some are _consistently_ failing due to the inputs we attempt to spend being too
young. I'm unsure what's up with that. Most seem to pass _consistently_,
implying it's not a random issue yet some configuration/env aspect.
* Clean and document monero-address
* Sync rest of repo with monero-serai changes
* Represent height/block number as a u32
* Diversify ViewPair/Scanner into ViewPair/GuaranteedViewPair and Scanner/GuaranteedScanner
Also cleans the Scanner impl.
* Remove non-small-order view key bound
Guaranteed addresses are in fact guaranteed even with this due to prefixing key
images causing zeroing the ECDH to not zero the shared key.
* Finish documenting monero-serai
* Correct imports for no-std
* Remove possible panic in monero-serai on systems < 32 bits
This was done by requiring the system's usize can represent a certain number.
* Restore the reserialize chain binary
* fmt, machete, GH CI
* Correct misc TODOs in monero-serai
* Have Monero test runner evaluate an Eventuality for all signed TXs
* Fix a pair of bugs in the decoy tests
Unfortunately, this test is still failing.
* Fix remaining bugs in monero-wallet tests
* Reject torsioned spend keys to ensure we can spend the outputs we scan
* Tidy inlined epee code in the RPC
* Correct the accidental swap of stagenet/testnet address bytes
* Remove unused dep from processor
* Handle Monero fee logic properly in the processor
* Document v2 TX/RCT output relation assumed when scanning
* Adjust how we mine the initial blocks due to some CI test failures
* Fix weight estimation for RctType::ClsagBulletproof TXs
* Again increase the amount of blocks we mine prior to running tests
* Correct the if check about when to mine blocks on start
Finally fixes the lack of decoy candidates failures in CI.
* Run Monero on Debian, even for internal testnets
Change made due to a segfault incurred when locally testing.
https://github.com/monero-project/monero/issues/9141 for the upstream.
* Don't attempt running tests on the verify-chain binary
Adds a minimum XMR fee to the processor and runs fmt.
* Increase minimum Monero fee in processor
I'm truly unsure why this is required right now.
* Distinguish fee from necessary_fee in monero-wallet
If there's no change, the fee is difference of the inputs to the outputs. The
prior code wouldn't check that amount is greater than or equal to the necessary
fee, and returning the would-be change amount as the fee isn't necessarily
helpful.
Now the fee is validated in such cases and the necessary fee is returned,
enabling operating off of that.
* Restore minimum Monero fee from develop
2024-07-07 10:57:18 +00:00
|
|
|
|_, _, tx: Transaction, _, data: SimpleRequestRpc| async move {
|
2023-01-30 09:25:46 +00:00
|
|
|
// confirm receipt
|
2023-07-24 08:53:59 +00:00
|
|
|
let _: EmptyResponse = data.json_rpc_call("refresh", None).await.unwrap();
|
|
|
|
let transfer: TransfersResponse = data
|
|
|
|
.json_rpc_call("get_transfer_by_txid", Some(json!({ "txid": hex::encode(tx.hash()) })))
|
|
|
|
.await
|
|
|
|
.unwrap();
|
|
|
|
assert_eq!(transfer.transfer.subaddr_index, Index { major: 0, minor: 0 });
|
|
|
|
assert_eq!(transfer.transfer.amount, 1000000);
|
2023-01-30 09:25:46 +00:00
|
|
|
},
|
|
|
|
),
|
|
|
|
);
|