Gupax is a (Windows|macOS|Linux) GUI for mining [**Monero**](https://github.com/monero-project/monero) on [**P2Pool**](https://github.com/SChernykh/p2pool), using [**XMRig**](https://github.com/xmrig/xmrig).
The [Monero GUI](https://github.com/monero-project/monero-gui) software lets you run a Monero node (among other things). A Monero node connects you to other peers and lets you download Monero's [blockchain](https://en.wikipedia.org/wiki/Blockchain).
P2Pool as a concept was [first developed for Bitcoin](https://en.bitcoin.it/wiki/P2Pool) but was [never fully realized](https://github.com/p2pool/p2pool) due to many limitations. These limitations were fixed when SChernykh rewrote P2Pool from scratch for Monero. P2Pool combines the best of solo mining and traditional pool mining:
* ***It's decentralized:*** There's no central server that can be shutdown or pool admin that controls your hashrate
* ***It's permissionless:*** It's peer-to-peer so there's no one to decide who can and cannot mine on the pool
* ***It's trustless:*** Funds are never in custody, all pool blocks pay out to miners directly and immediately
Both Monero and P2Pool have built in miners but XMRig is quite faster than both of them. Due to issues like [anti-virus flagging](https://github.com/monero-project/monero-gui/pull/3829#issuecomment-1018191461), it is not feasible to integrate XMRig directly into Monero or P2Pool, however, XMRig is still freely available for anyone to download with the caveat being: you have to set it up yourself.
By default, though, Gupax will use a [Remote Monero Node](#remote-monero-nodes) so you don't even have to run your own full Monero node to start mining on P2Pool.
1. [Download the bundled version of Gupax for your OS here](https://github.com/hinto-janaiyo/gupax/releases) or from [gupax.io](https://gupax.io/downloads)
2. Extract somewhere (Desktop, Documents, etc)
3. Launch Gupax
4. Input your Monero address in the `[P2Pool]` tab
P2Pool Simple allows you to ping & connect to a [Remote Monero Node](#remote-monero-nodes) and start your own local P2Pool instance on the `Mini` sidechain.
To start P2Pool, first input the Monero address you'd like to receive payouts from. You must use a primary Monero address to mine on P2Pool (starts with a 4). It is highly recommended to create a new wallet since addresses are public on P2Pool!
**Warning: [There are negative privacy/security implications when using a Monero node not in your control.](https://www.getmonero.org/resources/moneropedia/remote-node.html)** Select a remote node that you trust, or better yet, run your own node. If you'd like to manually specify a node to connect to, see [Advanced.](#advanced)
XMRig Simple has a log output box, a thread slider, and `Pause-on-active` setting.
If XMRig is started with `Pause-on-active` with a value greater than 0, XMRig will automatically pause for that many seconds if it detects any user activity (mouse movements, keyboard clicks). [This setting is only available on Windows/macOS.](https://xmrig.com/docs/miner/config/misc#pause-on-active)
XMRig Simple will always mine to your own local P2Pool (`127.0.0.1:3333`), if you'd like to manually specify a pool to mine to, see [Advanced](#advanced).
Download the [`SHA256SUMS`](https://github.com/hinto-janaiyo/gupax/releases/latest) file, download and import my [`PGP key`](https://github.com/hinto-janaiyo/gupax/blob/main/pgp/hinto-janaiyo.asc), and verify:
Make sure the _version_ you are comparing against is correct, and make sure you are comparing the _binary_ to the _binary_, not the `tar/zip`. If they match, you can be sure they are the exact same. Verifying the PGP signature is also recommended:
Running and using your own local Monero node improves privacy and security. It also means you won't be depending on one of the [Remote Monero Nodes](#remote-monero-nodes) provided by Gupax. This comes at the cost of downloading and syncing Monero's blockchain yourself (currently `155GB`).
After syncing the blockchain, you will now have your own Monero node. The 4th step enables `ZMQ`, which is extra Monero node functionality that is needed for P2Pool to work correctly.
[For much more detailed information on configuring a Monero node, click here.](https://monerodocs.org)
By default, Gupax has `auto-update`&`auto-ping` enabled. This can only be turned off in the GUI which causes a chicken-and-egg problem. To get around this, start Gupax with `--no-startup`. This will disable all `auto` features for that instance.
The default resolution of Gupax is `1280x960` which is a `4:3` aspect ratio.
This can be changed by dragging the corner of the window itself or by using the resolution sliders in the `Gupax Advanced` tab. After a resolution change, Gupax will fade-in/out of black and will take a second to resize all the UI elements to scale correctly to the new resolution.
If you have changed your OS's pixel scaling, you may need to resize Gupax to see all UI correctly.
By default, Gupax updates via Tor. In particular, it uses [`Arti`](https://gitlab.torproject.org/tpo/core/arti), the official Rust implementation of Tor.
Instead of bootstrapping onto the Tor network every time, Arti saves state/cache about the Tor network (circuits, guards, etc) for later reuse onto the disk:
Long-term state is saved onto the disk in the "OS data folder", using the [TOML](https://github.com/toml-lang/toml) format. If not found, default files will be created.
Given a slightly corrupted `state.toml` file, Gupax will attempt to merge it with a new default one. This will most likely happen if the internal data structure of `state.toml` is changed in the future (e.g removing an outdated setting). The node/pool database cannot be merged.
The `xmr` file is the sum of XMR mined as [Atomic Units](https://web.getmonero.org/resources/moneropedia/atomic-units.html). The equation to represent this as XMR is:
**Warning:** Gupax will use your custom PATH/binary and will replace them if you use `Check for updates` in the `[Gupax]` tab. There are sanity checks in place, however. Your PATH MUST end in a value that _appears_ correct or else the updater will refuse to start:
| Binary | Accepted values | Good PATH | Bad PATH |
The overriding command arguments will completely override your Gupax settings and start P2Pool with those arguments. **Warning:** If using this setting, use `--no-color` and make sure to set `--data-api <PATH>`&`--local-api` so that the `[Status]` tab can work!
| `P2Pool Main` | LESS frequent shares that are MORE valuable | Results in MORE outputs worth LESS | 20 shares, 100 outputs worth `0.006 XMR` | `0.6 XMR` |
| `P2Pool Mini` | MORE frequent shares that are LESS valuable | Results in LESS outputs worth MORE | 100 shares, 20 outputs worth `0.03 XMR` | `0.6 XMR` |
| `Solo mining` | No shares, only payouts | 1 output | 1 output worth the block reward: `0.6 XMR` | `0.6 XMR` |
In the end, it doesn't matter _too much_ which sidechain you pick, it will all average out. Getting LESS but more valuable outputs may be desired, however, since the transaction cost to combine all of them (`sweep_all`) will be cheaper due to being comprised of less outputs.
The overriding command arguments will completely override your Gupax settings and start XMRig with those arguments. **Warned:** If using this setting, use `[--no-color]` and make sure to set `[--http-host <IP>]`&`[--http-port <PORT>]` so that the `[Status]` tab can work!
| `HTTP API IP` | The IP XMRig's HTTP API server will bind to | `localhost/127.0.0.1` | It must be a valid IPv4 address or a valid domain name | 255 characters |
| DNS | DNS connections will usually be handled by your OS (or whatever custom DNS setup you have). If using Tor, DNS requests for updates [*should*](https://tpo.pages.torproject.net/core/doc/rust/arti/) be routed through the Tor network automatically | All of the above | All of the above |
These are the remote nodes used by Gupax in the `[P2Pool Simple]` tab. They are sourced from [this list](https://github.com/hinto-janaiyo/monero-nodes), which itself sources from [`monero.fail`](https://monero.fail). The nodes with the most consistent uptime are used.
| bunkernet.ddns.net | 🇿🇦 ZA - Western Cape | 18089 | 18084 |
These are community nodes that **DON'T** have ZMQ enabled but are fast and well-known. These are not used in Gupax but can be used for general Monero usage.
| Name | Owner | Owner Type | IP/Domain | RPC Port |
The `--release` profile in Gupax is set to prefer code performance & small binary sizes over compilation speed (see [`Cargo.toml`](https://github.com/hinto-janaiyo/gupax/blob/main/Cargo.toml)). Gupax itself (with all dependencies already built) takes around 1m30s to build (vs 10s on a normal `--release`) with a Ryzen 5950x.
You'll need the development versions of libraries like `OpenSSL`, `SQLite`, and maybe some other ones already installed on your system. Read the compiler errors to see which ones are missing from your system and search around to see which packages you'll need to install depending on your distro.
The Linux release tars come with another file next to the Gupax binary: `Gupax.AppImage`. ***This is not an actual [AppImage](https://en.wikipedia.org/wiki/AppImage)***, it is just a text file that contains: `./gupax`. This allows users to double-click and execute Gupax in file explorers like `Nautilus` in Ubuntu/Debian.
| Built-in `Update` feature is disabled | Updates should be handled by the native package manager
| Default `P2Pool/XMRig` path is `/usr/bin/` | `P2Pool/XMRig` exist in _[some](https://aur.archlinux.org)_ repositories, which means they'll be installed in `/usr/bin/`
This will build Gupax with the MSVC toolchain (`x86_64-pc-windows-msvc`). This is the recommended method and is how the pre-compiled release binaries are built.
The GUI library Gupax uses is [egui](https://github.com/emilk/egui). It is licensed under [MIT](https://github.com/emilk/egui/blob/master/LICENSE-MIT) & [Apache 2.0.](https://github.com/emilk/egui/blob/master/LICENSE-APACHE)
[Many other libraries are used that have various licenses.](https://github.com/hinto-janaiyo/gupax/blob/master/Cargo.toml)
[Gupax](https://github.com/hinto-janaiyo/gupax/blob/master/LICENSE), [P2Pool](https://github.com/SChernykh/p2pool/blob/master/LICENSE), and [XMRig](https://github.com/xmrig/xmrig/blob/master/LICENSE) are licensed under the GNU General Public License v3.0.
GitHub's API blocks request that do not have an HTTP `User-Agent` header. [Gupax uses a random recent version of a `Wget/Curl` user-agent.](https://github.com/hinto-janaiyo/gupax/blob/e6bf49b309c64d29e50c0a1a185fcf0ebc05e7c7/src/update.rs#L134)
If you are using the [default P2Pool settings](#P2Pool) then you are using a [Remote Monero Node](#remote-monero-nodes). Using a remote node is convenient but comes at the cost of privacy and reliability. You may encounter connections issues with these nodes that look like this:
2023-01-05 12:27:37.7962 P2PServer peer 23.233.96.72:37888 is ahead on mainchain (height 2792939, your height 2792936). Is your monerod stuck or lagging?
Running and using your own local Monero node improves privacy and ensures your connection is as stable as your own internet connection. This comes at the cost of downloading and syncing Monero's blockchain yourself (currently 155GB). If you have the disk space, consider using the [P2Pool Advanced](#p2pool-1) tab and connecting to your own Monero node.
For a simple guide, see the [Running a Local Monero Node](#running-a-local-monero-node) section.
If you started an update, you should let it finish. If the update has been stuck for a *long* time, quitting Gupax is probably okay. The worst that can happen is that your `Gupax/P2Pool/XMRig` binaries may be moved/deleted. Those can be easily redownloaded. Your actual `Gupax` user data (settings, custom nodes, pools, etc) is never touched.
Although Gupax uses a temporary folder (`gupax_update_[A-Za-z0-9]`) to store temporary downloaded files, there aren't measures in place to revert an upgrade once the file swapping has actually started. If you quit Gupax anytime before the `Upgrading packages` phase (after metadata, download, extraction), you will technically be safe but this is not recommended as it is risky, especially since these updates can be very fast.
Gupax also holds up to [500,000 bytes](https://github.com/hinto-janaiyo/gupax/blob/e6bf49b309c64d29e50c0a1a185fcf0ebc05e7c7/src/helper.rs#L59) of log data from `P2Pool/XMRig` to display in the GUI terminals. These logs are reset once over capacity which takes around 1-4 hours.
