feather/contrib/guix

Bootstrappable Feather Wallet Builds

This directory contains the files necessary to perform bootstrappable Feather Wallet builds.

Bootstrappability allows us to audit and reproduce our toolchain instead of blindly trusting binary downloads. Our build environment can be built from source, all the way down.

We achieve bootstrappability by using Guix as a functional package manager. Guix runs on any Linux distribution and on most architectures (x86_64, aarch64, riscv64). To produce reproducible release binaries, you only need to install Guix and run the build script.

Guix allows us to modify any detail about our build environment with ease. Unlike Gitian, we are not limited to the package set of a particular Ubuntu version. With Guix, we can configure our toolchains to use the latest compilers while still targeting older versions of glibc. We drastically reduce our supply chain attack surface by only including the package we need in our build environment, and nothing else. Packages that are not available in Guix can easily be defined in the manifest or upstreamed.

Feather releases are independently reproduced and cryptographically attested to by multiple contributors. You can submit attestations to the feather-sigs repo.

Requirements

• any Linux distribution
• 50 GB of free disk space
• 4 or more cores recommended
• 2 GB RAM per thread

Quick setup

If you're just here to get a build running (e.g. to test your changes) and quickly want to get up and running:

Install Guix

On Ubuntu 22.04, Debian 11, or later:

$ apt install guix

If Guix is not available in your package manager, use the official install script.

Clone the repo

$ git clone https://github.com/feather-wallet/feather
$ cd feather

Run the build

To build all targets using all available cores:

$ ./contrib/guix/guix-build

To limit the number of threads to N:

$ JOBS=N ./contrib/guix/guix-build

To only build the x86_64 linux target:

$ HOSTS="x86_64-linux-gnu" ./contrib/guix/guix-build

More recognized environment variables can be found further below.

Installation and Setup

If you don't have Guix installed and set up, please follow the instructions in INSTALL.md

Usage

If you haven't considered your security model yet, please read the relevant section before proceeding to perform a build.

Building

The author highly recommends at least reading over the common usage patterns and examples section below before starting a build. For a full list of customization options, see the recognized environment variables section.

To build Feather Wallet reproducibly with all default options, invoke the following from the top of a clean repository:

./contrib/guix/guix-build

Cleaning intermediate work directories

By default, guix-build leaves all intermediate files or "work directories" (e.g. depends/work, guix-build-*/distsrc-*) intact at the end of a build so that they are available to the user (to aid in debugging, etc.). However, these directories usually take up a large amount of disk space. Therefore, a guix-clean convenience script is provided which cleans the current git worktree to save disk space:

./contrib/guix/guix-clean

Attesting to build outputs

After you've cloned the feather-sigs repository, to attest to the current worktree's commit/tag:

env GUIX_SIGS_REPO=<path/to/feather-sigs> SIGNER=<gpg-key-fingerprint>=<gh_username> ./contrib/guix/guix-attest

See ./contrib/guix/guix-attest --help for more information on the various ways guix-attest can be invoked.

For a step-by-step walkthrough, see: https://paste.debian.net/plainh/2457c02c. Make sure to replace the version number with the version you want to build.

Verifying build output attestations

After at least one other signer has uploaded their signatures to the feather-sigs repository:

git -C <path/to/feather-sigs> pull
env GUIX_SIGS_REPO=<path/to/feather-sigs> ./contrib/guix/guix-verify

Common guix-build invocation patterns and examples

Keeping caches outside of the worktree

If you perform a lot of builds and have a bunch of worktrees, you may find it more efficient to keep the depends tree's download cache and build cache outside of the worktrees to avoid duplicate downloads and unnecessary builds. To help with this situation, the guix-build script honours the SOURCES_PATH, BASE_CACHE environment variables and will pass them on to the depends tree so that you can do something like:

env SOURCES_PATH="$HOME/depends-SOURCES_PATH" BASE_CACHE="$HOME/depends-BASE_CACHE" ./contrib/guix/guix-build

Note that the paths that these environment variables point to must be directories, and NOT symlinks to directories.

See the recognized environment variables section for more details.

Building a subset of platform triples

Sometimes you only want to build a subset of the supported platform triples, in which case you can override the default list by setting the space-separated HOSTS environment variable:

env HOSTS='x86_64-w64-mingw32 x86_64-apple-darwin' ./contrib/guix/guix-build

See the recognized environment variables section for more details.

Controlling the number of threads used by guix build commands

Depending on your system's RAM capacity, you may want to decrease the number of threads used to decrease RAM usage or vice versa.

By default, the scripts under ./contrib/guix will invoke all guix build commands with --cores="$JOBS". Note that $JOBS defaults to $(nproc) if not specified. However, astute manual readers will also notice that guix build commands also accept a --max-jobs= flag (which defaults to 1 if unspecified).

Here is the difference between --cores= and --max-jobs=:

Note: When I say "derivation," think "package"

--cores=

• controls the number of CPU cores to build each derivation. This is the value passed to make's --jobs= flag.

--max-jobs=

• controls how many derivations can be built in parallel
• defaults to 1

Therefore, the default is for guix build commands to build one derivation at a time, utilizing $JOBS threads.

Specifying the $JOBS environment variable will only modify --cores=, but you can also modify the value for --max-jobs= by specifying $ADDITIONAL_GUIX_COMMON_FLAGS. For example, if you have a LOT of memory, you may want to set:

export ADDITIONAL_GUIX_COMMON_FLAGS='--max-jobs=8'

Which allows for a maximum of 8 derivations to be built at the same time, each utilizing $JOBS threads.

Or, if you'd like to avoid spurious build failures caused by issues with parallelism within a single package, but would still like to build multiple packages when the dependency graph allows for it, you may want to try:

export JOBS=1 ADDITIONAL_GUIX_COMMON_FLAGS='--max-jobs=8'

See the recognized environment variables section for more details.

Recognized environment variables

• HOSTS

  Override the space-separated list of platform triples for which to perform a bootstrappable build.

  (defaults to "x86_64-linux-gnu aarch64-linux-gnu arm-linux-gnueabihf x86_64-linux-gnu.no-tor-bundle x86_64-linux-gnu.pack riscv64-linux-gnu x86_64-w64-mingw32 x86_64-w64-mingw32.installer x86_64-apple-darwin arm64-apple-darwin")

• SOURCES_PATH

  Set the depends tree download cache for sources. This is passed through to the depends tree. Setting this to the same directory across multiple builds of the depends tree can eliminate unnecessary redownloading of package sources.

  The path that this environment variable points to must be a directory, and NOT a symlink to a directory.

• BASE_CACHE

  Set the depends tree cache for built packages. This is passed through to the depends tree. Setting this to the same directory across multiple builds of the depends tree can eliminate unnecessary building of packages.

  The path that this environment variable points to must be a directory, and NOT a symlink to a directory.

• JOBS

  Override the number of jobs to run simultaneously, you might want to do so on a memory-limited machine. This may be passed to:

  • guix build commands as in guix environment --cores="$JOBS"
  • make as in make --jobs="$JOBS"
  • xargs as in xargs -P"$JOBS"

  See here for more details.

  (defaults to the value of nproc outside the container)

• V

  If non-empty, will pass V=1 to all make invocations, making make output verbose.

  Note that any given value is ignored. The variable is only checked for emptiness. More concretely, this means that V= (setting V to the empty string) is interpreted the same way as not setting V at all, and that V=0 has the same effect as V=1.

• SUBSTITUTE_URLS

  A whitespace-delimited list of URLs from which to download pre-built packages. A URL is only used if its signing key is authorized (refer to the substitute servers section for more details).

• ADDITIONAL_GUIX_COMMON_FLAGS

  Additional flags to be passed to all guix commands.

• ADDITIONAL_GUIX_TIMEMACHINE_FLAGS

  Additional flags to be passed to guix time-machine.

• ADDITIONAL_GUIX_ENVIRONMENT_FLAGS

  Additional flags to be passed to the invocation of guix environment inside guix time-machine.

Choosing your security model

No matter how you installed Guix, you need to decide on your security model for building packages with Guix.

Guix allows us to achieve better binary security by using our CPU time to build everything from scratch. However, it doesn't sacrifice user choice in pursuit of this: users can decide whether or not to use substitutes (pre-built packages).

Option 1: Building with substitutes

Step 1: Authorize the signing keys

Depending on the installation procedure you followed, you may have already authorized the Guix build farm key. In particular, the official shell installer script asks you if you want the key installed, and the debian distribution package authorized the key during installation.

You can check the current list of authorized keys at /etc/guix/acl.

At the time of writing, a /etc/guix/acl with just the Guix build farm key authorized looks something like:

(acl
 (entry
  (public-key
   (ecc
    (curve Ed25519)
    (q #8D156F295D24B0D9A86FA5741A840FF2D24F60F7B6C4134814AD55625971B394#)
    )
   )
  (tag
   (guix import)
   )
  )
 )

If you've determined that the official Guix build farm key hasn't been authorized, and you would like to authorize it, run the following as root:

guix archive --authorize < /var/guix/profiles/per-user/root/current-guix/share/guix/ci.guix.gnu.org.pub

If /var/guix/profiles/per-user/root/current-guix/share/guix/ci.guix.gnu.org.pub doesn't exist, try:

guix archive --authorize < <PREFIX>/share/guix/ci.guix.gnu.org.pub

Where <PREFIX> is likely:

• /usr if you installed from a distribution package
• /usr/local if you installed Guix from source and didn't supply any prefix-modifying flags to Guix's ./configure

For dongcarl's substitute server at https://guix.carldong.io, run as root:

wget -qO- 'https://guix.carldong.io/signing-key.pub' | guix archive --authorize

Removing authorized keys

To remove previously authorized keys, simply edit /etc/guix/acl and remove the (entry (public-key ...)) entry.

Step 2: Specify the substitute servers

Once its key is authorized, the official Guix build farm at https://ci.guix.gnu.org is automatically used unless the --no-substitutes flag is supplied. This default list of substitute servers is overridable both on a guix-daemon level and when you invoke guix commands. See examples below for the various ways of adding dongcarl's substitute server after having authorized his signing key.

Change the default list of substitute servers by starting guix-daemon with the --substitute-urls option (you will likely need to edit your init script):

guix-daemon <cmd> --substitute-urls='https://guix.carldong.io https://ci.guix.gnu.org'

Override the default list of substitute servers by passing the --substitute-urls option for invocations of guix commands:

guix <cmd> --substitute-urls='https://guix.carldong.io https://ci.guix.gnu.org'

For scripts under ./contrib/guix, set the SUBSTITUTE_URLS environment variable:

export SUBSTITUTE_URLS='https://guix.carldong.io https://ci.guix.gnu.org'

Option 2: Disabling substitutes on an ad-hoc basis

If you prefer not to use any substitutes, make sure to supply --no-substitutes like in the following snippet. The first build will take a while, but the resulting packages will be cached for future builds.

For direct invocations of guix:

guix <cmd> --no-substitutes

For the scripts under ./contrib/guix/:

export ADDITIONAL_GUIX_COMMON_FLAGS='--no-substitutes'

Option 3: Disabling substitutes by default

guix-daemon accepts a --no-substitutes flag, which will make sure that, unless otherwise overridden by a command line invocation, no substitutes will be used.

If you start guix-daemon using an init script, you can edit said script to supply this flag.